SuperShafty Branded

SuperShafty CP44 & CP43 add on brass covers

SuperShafty CP44 & CP43 add on brass weight gear covers. Want to add a little weight to your ...

SuperShafty CP44 & CP43 add on brass weight gear covers. Want to add a little weight to your SS CP44 & CP43 axles? Here is your chance. These fit ONLY CP44 & CP43 Rear Axle housings, and the ALUMINUM front SuperShafty Knuckles. They will not stack on top of the brass knuckles. They do not fit stock axles or other brand axles and knuckles. Sold in Pairs.  The heavies require a small amount of modification to fit the steering knuckles. But bolt right on the rear CP43 and CP44's   NO...

Quad adapter 3S Lipo to JST

No Solder 3S battery balance port to QUAD male JST connector. Power for your accessories d...

No Solder 3S battery balance port to QUAD male JST connector. Power for your accessories directly from your battery. Only for use with 3S Lipo batteries with a balance port. Power up to 4 different items at once without breaking out the soldering iron.  

INVENTORY PART EXCHANGE TRACKING

FOR INTERNAL USE ONLY

FOR INTERNAL USE ONLY

SuperShafty Velcro Patches

High quality velcro SuperShafty bomb patches

High quality velcro SuperShafty bomb patches

SuperShafty Hats

DESCRIPTION: Most of our hats are 404M Trucker Flexfit from Pacific Headwear.

DESCRIPTION: Most of our hats are 404M Trucker Flexfit from Pacific Headwear.

SuperShafty ChupaCapra - Capra Billet Chassis

Feb 2023 - Update. More are in process. I don't have an exact date yet, but should be soon. If y...

Feb 2023 - Update. More are in process. I don't have an exact date yet, but should be soon. If you would like to reserve one, Please place an order for the *RESERVE ME ONE* in the drop down box below. This reservation fee will be applied to your purchase, and the balance due before shipping of your chassis. It is NON refundable, but it is transferable.    ChupaCapra - Capra Billet Chassis - Turn your goat, into a goat monster!!!! Starts as a 40 pound block of 6061 aluminum. Ends as a lightw...

Dowel Pins

Everyone loses those dowel pins. So grab some spares for the toolbox. SuperShafty only stocks Hig...

Everyone loses those dowel pins. So grab some spares for the toolbox. SuperShafty only stocks High Quality Alloy pins. NOT the weaker Stainless. Available in the 3 most common RC sizes Sold in set of (6) Pins M1.5 x 8mm (For top gears) M2.0 x 10mm (For SuperShafty top shaft and most 12mm Hex) M2.5 x 12mm (Stub shafts)

Brass Knuckle bushing - Top Hat style

SuperShafty Brass Knuckle bushing - Top Hat style Works with SS60 Knuckles CP44 Axle/Knuckles St...

SuperShafty Brass Knuckle bushing - Top Hat style Works with SS60 Knuckles CP44 Axle/Knuckles Stock Axial Wraith Stock Axial SCX10.1 Vanquish Wraith Many others (4) Bushings included per order. 

Vitavon Capra Carbon Fiber Body Panels

Here we have some REAL Carbon fiber panels molded to the same specifications as the stock panels....

Here we have some REAL Carbon fiber panels molded to the same specifications as the stock panels. Yes. REAL Carbon Fiber. And they are 1.2 -to-1.3mm thick. They are much more rigid than I even expected. Very high quality part. Available in 4 colors: Rich Red Cobalt Blue Bright Silver Matte Black Fits Axial Capra with no modifications needed.

SuperShafty Axial Capra Rear Axle Upper Link Re...

SuperShafty Axial Capra Rear Axle Upper Link Relocation Riser Bracket Works with stock Axial Ca...

SuperShafty Axial Capra Rear Axle Upper Link Relocation Riser Bracket Works with stock Axial Capra Rear straight Axle And SuperShafty "CP44" rear straight Axle. It hooks into your stock truss, and also bolts to the stock link location brackets for extra stability. Made from high quality Aluminum. Light weight and heavy duty. Options of Raising your rear links + 11mm and + 16mm at the rear axle. Available in Silver or Black. (Now available in Dark Grey as well) Lifetime Bombproof Warranty. ...

Tyler's Body Clips

Tyler's Body Clips Now stocking some parts that my 9 year old son is making. This product was ins...

Tyler's Body Clips Now stocking some parts that my 9 year old son is making. This product was inspired by my father, he was having a hard time with his body clips, holding them, dropping them, pulling them out etc. My son liked the design, but thought it needed a little flair, so we got some super bright pieces and went to town.  These are high quality pre-bent body clips With easy to see and easy grab Silicone pull tabs. 8 body clips per package Offered in 6 colors. Blue, Orange, Yellow, Pi...

SuperShafty Axial Capra Axle Servo Mount

SuperShafty Axial Capra Axle Servo Mount Works with stock Axial Capra Axle and SuperShafty "CP4...

SuperShafty Axial Capra Axle Servo Mount Works with stock Axial Capra Axle and SuperShafty "CP44" Axle Made from 6061 Aluminum. Light weight and heavy duty. Eliminate the flex from the flimsy stock mount. Available in Silver or Black. Lifetime Bombproof Warranty. 

Pre-Built Bombproof Transmissions - IN STOCK RE...

Pre-Built Bombproof Transmissions - IN STOCK READY TO SHIP Each Trans has a Picture with a number...

Pre-Built Bombproof Transmissions - IN STOCK READY TO SHIP Each Trans has a Picture with a number and it has a corresponding selection for that piece in the Drop Down Box. Pay close attention to the one you would like to receive.  They are all different, and all priced differently based on options.   These transmissions were Pre-Built to take to events for display. Some may have scratches or marks on them from being handled at events or to and from in the storage box.  ALL BOMBPROOF TRANSMISS...

Shop Rate - Labor Hours

ONLY Add this to cart if you have been directed here by management. Billable labor hours $29.99 f...

ONLY Add this to cart if you have been directed here by management. Billable labor hours $29.99 for any jobs less than 15 min $44.99 for first half hour. $59.99 Per hour for any job 1+ Hours $49.99 Per hour for any job 5+ Hours   Any jobs less than 15 minutes $29.99 First 0.5 Hour - $44.99 Any job 1 to 4.5 Hours @ $59.99/hr 5 Hours + @ $49.99/hr 

VS4-10 & VS4 PRO - PARTOUT

We have Several VS4-10's that we are parting out. All parts are NEW and complete - Just not retai...

We have Several VS4-10's that we are parting out. All parts are NEW and complete - Just not retail packaged. Currently listed we have: Complete Axles - (Their own listing) HERE Beadlock Wheels  Shocks  Tires & Foams  Pro Frame set (Including braces, Shock mounts, panhard mount, Body Mounts)  Pro Body Set (Including interior and Detail set) - (Shipping price may vary due to size) Full Link set  Driveshafts  Pro Transmission with Skid  If you need anything ELSE from one of these kits, Le...

Revo Rod End - No Balls

Everyone knows what these are.  Probably one of the most recognizable parts out there. Revo Rod ...

Everyone knows what these are.  Probably one of the most recognizable parts out there. Revo Rod ends are strong, light, and useful for just about anything.  They take a 3mm bolt in the eye, and 4mm in the end to attach to your links.  The Product here, is Just the plastic ends (To replace your worn out ones) Less than Half the cost of the ends with the balls. (8) Plastic Rod ends (0) Zero Steel Balls To order more, just add multiple of this item to your cart. *We also sell them with the ba...

VS4-10 Ultra Portal AND VS4-10 Pro Straight Axl...

Set of new unassembled VS410 axles They come with all the parts to assemble 2 complete axles lik...

Set of new unassembled VS410 axles They come with all the parts to assemble 2 complete axles like shown Colors Available F9 VS410 Pro Straight Axles - Black (Ready to ship) - $499.00 F9 VS410 Pro Straight Axles - Silver (Ready to ship) - $499.00 F9 PORTAL VS410 Ultra Portal Axles - Black (Ready to ship) - $599.00 F9 PORTAL VS410 Ultra Portal Axles - Silver (Ready to ship) - $599.00 *(Only silver assembled set VS4 Shown for reference) *(We can also assemble for $60 extra charge)

4mm M4 Nylock Flanged Wheel lock nuts

Need replacement hardware for your RC Truck wheel nuts? The Nylock will stop holding after so man...

Need replacement hardware for your RC Truck wheel nuts? The Nylock will stop holding after so many times you take them on and off. We've got you covered. Grab a few new ones to hold those wheels tight. This Hardware is M4 - 4mm size. Used on Most axle nuts This is KNK Hardware. and uses a 7mm Driver.  Options offered for sale here: Replacement HW Pack Size 1 (12 Nuts) Replacement HW Pack Size 2 (24 Nuts) Replacement HW Pack Size 3 (48 Nuts)    

SuperShafty Bombproof 8mm Outputs

EXCLUSIVE TO SUPERSHAFTY Bombproof 8mm Outputs (New for 2020 they are now Hardened STEEL)  Warran...

EXCLUSIVE TO SUPERSHAFTY Bombproof 8mm Outputs (New for 2020 they are now Hardened STEEL)  Warranty against breakage for LIFE.    Each set comes with: 2 x Extended Outputs.  Front and Back. 2 x 8mm MIP Drive Hubs. (For use on standard MIP X-Duty Shafts) 3 x Screws for Main Gear 2 x Bearings for Transmission housings.   Added - You can buy without the hubs for less.   Not included:  MIP Drive Shafts. Steel Main Gear, or Steel Trans Gear set of 3 gears. Recommended: Upgrade to Steel Gear...

Top Shaft Spacer

This part is a spacer that fits between your trans case and the pin for the spur gear. It helps t...

This part is a spacer that fits between your trans case and the pin for the spur gear. It helps to eliminate the in and out play of the top shaft.   You will receive ONE spacer.

SuperShafty Bomb Sticker Sheet

Made from 2 mil Calandered Vinyl Then Lamanited for years of scratch resistant use Stickers for y...

Made from 2 mil Calandered Vinyl Then Lamanited for years of scratch resistant use Stickers for your RC Rigs. SuperShafty Bomb Logo's Appearance of sheet is subject to change at management discretion. Available as: 5x6 sheet 3.5x5 sheet

SuperShafty Bombproof 5mm Outputs

SUPERSHAFTY now has Bombproof 5mm Outputs!!! Warranty against breakage for LIFE.  Need that lit...

SUPERSHAFTY now has Bombproof 5mm Outputs!!! Warranty against breakage for LIFE.  Need that little bit longer reach, but not ready to step up to our 6mm extended shafts yet? We now how have the perfect solution. 5mm extended. Same great quality as our 6mm, but will use a stock or stock replacement driveshaft hub. These are also now available as an upgrade to our 5mm Transmission.   Each set comes with: 2 Outputs.  Front and Back. Screws for Main Gear Bearings for Transmission housings. Op...

Replacement Hardware for Wheels 1.9 & 2.2

Need replacement hardware for your wheels? We've got you covered. This Hardware is Buttonhead M2x...

Need replacement hardware for your wheels? We've got you covered. This Hardware is Buttonhead M2x6mm size. Used on SuperShafty 1.9 wheels (UperHafty & Falcon) SuperShafty 2.2 wheels (Prangs) BottomsUpRC 2.2 Wheels (Hawks) Black uses a larger 1.5mm Driver. This Hardware comes standard on all of our wheels. The Stainless is KNK and uses a 1.3mm or 0.05 Driver. This Hardware is an option for all our wheels. Options offered for sale here:   1.9 UperHafty, Falcon and 2.2 Prangs  Replacement...

Bombproof Brass LOSI Night Crawler HIGH MASS Re...

SuperShafty EXCLUSIVE!!!! Bombproof Brass Losi HIGH MASS Rear Lockouts For: LOSI Night Crawler ...

SuperShafty EXCLUSIVE!!!! Bombproof Brass Losi HIGH MASS Rear Lockouts For: LOSI Night Crawler Material: BRASS !!! and LOTS of it.   Brass pair weighs 160.53g Or also Aluminum, your choice. Aluminum pair weighs 51.24g (Cheaper Option) Included: 2 Lockouts (Choice of Material) Needed: You will need your own screws and bearings and axles These will work with all stock style parts. These are BOMBPROOF and Guaranteed for LIFE!!!!  LIMITED QUANTITY RUN !!!! Note: These are SORRCA Lega...

SuperShafty Bombproof 6mm Outputs

EXCLUSIVE TO SUPERSHAFTY Bombproof 6mm Outputs Warranty against breakage for LIFE.    Each set co...

EXCLUSIVE TO SUPERSHAFTY Bombproof 6mm Outputs Warranty against breakage for LIFE.    Each set comes with: 2 x Outputs.  Front and Back. 3 x Screws for Main Gear 2 x Bearings for Transmission housings. Not included:  MIP Drive Shafts. Hubs Steel Main Gear, or Steel Trans Gear set of 3 gears. Screw pins for hubs Recommended: Upgrade to Steel Gears. Steel MIP Drive Shafts. Fits: SCX10.1 Transmission housings, Including Stock, HR and VP. Wraith Outputs ONLY fit Wraith housings.   Buy the...

SuperShafty Scale Banner

Check out these awesome scale banners for your scale garage. Approximately 3.5"x7" Available in ...

Check out these awesome scale banners for your scale garage. Approximately 3.5"x7" Available in 5 colors now.  

SuperShafty Scale Rotor - UPDATED

These are the NEW UPDATED SuperShafty scale rotors.   We now have 2 different sizes available. Th...

These are the NEW UPDATED SuperShafty scale rotors.   We now have 2 different sizes available. The should fit in just about all 1.9 wheels, and just about all 2.2 wheels. The 2.2 version is much larger and possibly could fit some 1.9's, but they are designed for 2.2's. These have a step at the hub, as to not add unneeded thickness to the trackwidth. They both mount using the same mounting pattern as Vanquish Products SLW hubs.  Raw finish. This will oxidize and give a natural look. They come ...

SuperShafty WRAITH & SCX-10 BEEFY Top Shaft

This BEEFY TopShaft allows you to Run a Robinson Racing STEEL 32P Slipper On your SCX-10 or "WRAI...

This BEEFY TopShaft allows you to Run a Robinson Racing STEEL 32P Slipper On your SCX-10 or "WRAITH" Transmission Black oxide coating to reduce corrosion.  Some of the reasons to do this "MOD":#1 Larger Sliper surface#2 More Adjustment#3 Steel Teeth (32Pitch)  SEE HARLEY"S BUILD THREAD HERE: TOPSHAFT Includes: One "BEEFY" Top Shaft Two Gear Pins One Slipper Spring 5mm Nut *NEW ADDITION* - Top shaft spacer - (for between Spur and trans case, this spacer reduces in and out movement of the top...

SuperShafty Stickers

Do you want to have a BIG BOMB??? Check these out.  3 inch  6 inch 8 inch 12 inch Note: Please...

Do you want to have a BIG BOMB??? Check these out.  3 inch  6 inch 8 inch 12 inch Note: Please take special care when attaching the larger stickers. The larger sizes can make it easy to get air spots. I recommend laying it down at one corner and working it with a credit card.

6 x 5 Sticker Sheet

Made from 2mill Calandered Vinyl Then Lamanited for years of scratch resistant useThese 6 x 5 Die...

Made from 2mill Calandered Vinyl Then Lamanited for years of scratch resistant useThese 6 x 5 Die cut Full Color Sticker Sheet of your favorite Vendors and Scale Funny bumper stickers for your RC Rigs Note: Logos May have updated.

6 x 5 Warning Sticker Sheet

Made from 2mill Calandered Vinyl Then Lamanited for years of scratch resistant useThese 6 x 5 Die...

Made from 2mill Calandered Vinyl Then Lamanited for years of scratch resistant useThese 6 x 5 Die cut Full Color Sticker Sheet of  Scale Funny WARNING stickers for your RC Rigs Note: Logos May have updated.

Complete 6mm OutPut Bomb Proof TRANS

Looking for that "OVER THE TOP" experience for your  AXIAL or WRAITH based Rig ?PLEASE NOTE THIS ...

Looking for that "OVER THE TOP" experience for your  AXIAL or WRAITH based Rig ?PLEASE NOTE THIS IS OUR 6mm OUTPUT VERSION   WHAT YOU GET......... Vanquish Aluminum Cases (Choise of color) Hardened Steel Gears Our 6mm Stubby OutPuts  SuperShafty "BEEFY" Top Shaft SuperShafty "ULTIMATE" Motor Plate (Matching color) Robinson Racing 56T/32P Steel Slipper Team KNK Hardware with Black Nuts Jim's Bearings  LIFETIME BOMBPROOF WARRANTY Warranty requires maintenance, Grease, and cleaning. REQUIREMEN...

SuperShafty Capra Universals Axle Shafts (2)

SuperShafty Universals for stock Axial Capra front axles.    Machined from high quality chromoly...

SuperShafty Universals for stock Axial Capra front axles.    Machined from high quality chromoly steel, then heat treated. Larger than stock joint and pin. Clearanced for smoother rotation at max turning angles. Come assembled for easy installation This is a replacement set of Axial Capra 1.9 F9 Universal Axle Set, intended for use with the Capra 1.9 Unlimited Trail Buggy Kit, and work in the stock plastic housings. These also fit the SuperShafty CP44 axle housings. And other Stock Replacem...