Scale items
$9.99 – $9.99 (4 variants)
Comp Spec - Sand Ladder Its still a Sand Ladder, but its super light weight at only 7 grams Its s...
Comp Spec - Sand Ladder Its still a Sand Ladder, but its super light weight at only 7 grams Its small at only 3.5" long and 1 inch wide. It has holes printed in for easy mounting, and to be lighter. Available in 4 colors. Green, Orange, Yellow and Grey. Sold in PAIRS. (Shown next to a normal size sand ladder. And a scale rotor for size comparison)
$5.00 – $5.00 (12 variants)
Sea Squirrel SLW Scale Rotors - 1.9" Directional
SLW Scale Rotors - 1.9" Directional Scale Directional Rotors snap over the SLW style hubs and can...
SLW Scale Rotors - 1.9" Directional Scale Directional Rotors snap over the SLW style hubs and can be installed on MOST 1.9" and 2.2" SLW wheels. These are small for 2.2 wheels. See our Sea Squirrel SLW Scale Rotors - 2.2" Directional Recon G6 Certified Fits: Vanquish Products (VP), Lockedup RC, Treal Hobby, Injora (China) Hubs. Does not fit SSD Hubs. May fit other hubs but not tested. Adds approximately 1mm to your track width. Use existing hardware to mount. Includes: 2 left & 2 right ro...
$4.00 – $4.00 (4 variants)
Sea Squirrel Scale Oil Quart (qty 4)
Sea Squirrel Scale Oil Quart (qty 4) Scale Oil Quarts because who goes trailing without extra ess...
Sea Squirrel Scale Oil Quart (qty 4) Scale Oil Quarts because who goes trailing without extra essential fluids? Add these to your scale crawler and be prepared. Measures 7/8" (inches) tall and 7/16" (inch) wide and 1/4" (inch) deep, at the base. Includes 4 Scale Oil Quarts in chosen color.
$6.00
Sea Squirrel Scale Fire Extinguisher
Scale Fire Extinguisher Scale Fire Extinguisher with Mounting Bracket and 2 mounting screws inclu...
Scale Fire Extinguisher Scale Fire Extinguisher with Mounting Bracket and 2 mounting screws included. Included bolts, ShoeGoo, E6000 or CA Glue is recommended for mounting - Use as directed on product packaging. Measures 1-1/2" (inches) tall and 1/2" (inch) wide and 1/2" (inch) deep, at the base. 2 mounting screws included.
$29.99
Traxxas Assembled Utility trailer with trailer ...
Traxxas Assembled Utility trailer with trailer hitch and (2) 3mm spring pre-load spacers/ 2.5x8mm...
Traxxas Assembled Utility trailer with trailer hitch and (2) 3mm spring pre-load spacers/ 2.5x8mm BCS (2): TRX-4M, TRX4M The TRX-4M 1/18 scale utility trailer stows all your scale gear and attaches securely to your truck with the included hitch. Challenge your trailering skills by backing the utility trailer into position using your TRX-4M. Trailer comes fully assembled and ready use. Includes hitch, rear pre-load shock spacers (2) and 2.5 x8 mm screws (2)
$6.00
Sea Squirrel Scale Milk Crate Measures 1-3/16" (inches) tall and 1-1/4" (inch) wide and 1-1/4" (i...
Sea Squirrel Scale Milk Crate Measures 1-3/16" (inches) tall and 1-1/4" (inch) wide and 1-1/4" (inch) deep, at the base. ShoeGoo, E6000 or CA Glue is recommended for mounting - Use as directed on product packaging.
$13.00
Sea Squirrel Scale Highlift Jack
Scale Highlift Jack Scale Highlift Jack to decorate and accent your vehicle. Flexible parts resis...
Scale Highlift Jack Scale Highlift Jack to decorate and accent your vehicle. Flexible parts resist breakage, so mount it anywhere without worry. Use the included mounting base to glue the Scale Highlift Jack to your scale rig or use the included hardware to fasten it to your rig. ShoeGoo or E6000 is recommended for mounting - Use as directed on product packaging. Measures 4" (inches) tall and 5/8" (inch) square, at the base. Includes hardware.
$4.00
Sea Squirrel Scale First Aid Kit
Sea Squirrel Scale First Aid Kit Measures 1/4" (inches) tall and 1-3/16" (inch) wide and 13/16" (...
Sea Squirrel Scale First Aid Kit Measures 1/4" (inches) tall and 1-3/16" (inch) wide and 13/16" (inch) deep, at the base. ShoeGoo, E6000 or CA Glue is recommended for mounting - Use as directed on product packaging.
$5.00
INJORA 2Pcs Red Metal Bumper D-ring Tow Hook for 1/10 RC Crawler Car Traxxas TRX-4 Axial SCX10 90...
INJORA 2Pcs Red Metal Bumper D-ring Tow Hook for 1/10 RC Crawler Car Traxxas TRX-4 Axial SCX10 90046 D90 Suit for: 1/10 Scale RC Rock Crawler Car Features: Made of high quality metal Novel appearance and exquisite workmanship Fixed by screws and easy to install Specifications: Material: Metal Quantity: 2pcs Color: Red Package List: 2 * RC Car Metal Tow Hook
$15.00
Sea Squirrel RC Builder's Body Mount Kit
Sea Squirrel RC Builder's Body Mount Kit Secure your Lexan or Hard Body to your rig and don't wor...
Sea Squirrel RC Builder's Body Mount Kit Secure your Lexan or Hard Body to your rig and don't worry about it falling off. Recon G6 Certified! Trim to fit between the shock towers. They are extra long to accommodate forward motor mounts. Install one of the Flat Nuts on each mount to adjust body mounting height. Use the remaining Flat Nuts or the provided Exhaust Stack and Pull Pall Holder to secure the body. Trim the bolts to the desired length. NOTE: Additional lateral support is suggested t...
$5.00 – $5.00 (2 variants)
Leftover SuperShafty Fall Crawl License Plate -...
Leftover SuperShafty Fall Crawl License Plate by RC Plate Shop This is a 1/10 Scale License plate...
Leftover SuperShafty Fall Crawl License Plate by RC Plate Shop This is a 1/10 Scale License plate, that was included with the driver registration for the SuperShafty Fall Crawl event. We have a few of them leftover, get them while they last. Additional Info: Add this item to any order over $100 (not including shipping) and this item will be REFUNDED.
$5.00
Sea Squirrel Scale Windshield Wipers
Sea Squirrel Scale Windshield Wipers Scale Windshield Wipers made to resemble the ones included w...
Sea Squirrel Scale Windshield Wipers Scale Windshield Wipers made to resemble the ones included with the Mojave body. These are made from a flexible material and resist breakage. Use as replacements or add wipers to any body. Drill a single hole for each wiper and glue. ShoeGoo or E6000 is recommended for mounting - Use as directed on product packaging.
$6.00
Sea Squirrel Rod End Tool - Traxxas & Incision
Rod End Tool - Traxxas & Incision Use this Rod End Tool - Traxxas & Incision to aid in th...
Rod End Tool - Traxxas & Incision Use this Rod End Tool - Traxxas & Incision to aid in the installation of your rod ends. Works with the balls installed or without (standard Traxxas and Incision width balls). Features comfortable handle to manually install the rod ends and 1/4" hex to be used with any drill or cordless driver.
$2.99
This is a replacement Traxxas TRX-4 Jack with one mounting screw.
This is a replacement Traxxas TRX-4 Jack with one mounting screw.
$2.99
The Traxxas TRX-4 Jack is a scale accessory, perfect for your TRX-4, or any other scale build. Pa...
The Traxxas TRX-4 Jack is a scale accessory, perfect for your TRX-4, or any other scale build. Package includes jack and mounting screw.
$8.00
Sea Squirrel Scale 5th Wheel Pull Pal Holder
Sea Squirrel Scale 5th Wheel Pull Pal Holder Secure your Pull Pal or Land Anchor to your rig and ...
Sea Squirrel Scale 5th Wheel Pull Pal Holder Secure your Pull Pal or Land Anchor to your rig and don't worry about it falling off. Works with Lexan and Hard bodies. It's also compatible with our Sea Squirrel Builder's Body Mount. Includes: Pull Pal Holder and Nylon Bolt To install: Drill a 6mm or 1/4" hole in the location of your choice. Trim nylon bolt to length.
$7.00
Sea Squirrel Tire Mount Stand for 1.9" Beadlock
Tire Mount Stand for 1.9" Beadlock This pedestal is designed to assist you when installing tires ...
Tire Mount Stand for 1.9" Beadlock This pedestal is designed to assist you when installing tires on 1.9" RC Crawler Beadlock Wheels. Durable plastic will withstand the force needed to assemble RC beadlock wheels. The design supports the beadlock wheel and allows free movement of the tire and foam. This makes assembly much easier since most tires and foam combinations are wider than the wheels. Works with stamped steel, inner clamp-ring, and beadlock ring style wheels. Also assists with wheels...
$6.00
Sea Squirrel Scale Side Mirror - Small
Sea Squirrel Scale Side Mirror - Small Side Mirrors for your Scale Crawler. Designed to mimic the...
Sea Squirrel Scale Side Mirror - Small Side Mirrors for your Scale Crawler. Designed to mimic the old-school domestic truck side mirrors. These are made from a flexible material and resist breakage. Mounting post pattern matches the TRX4 Blazer body. The pair are 3/8" (10mm) narrower overall than originals. This makes the overall width of your truck that much smaller. And that matters when competing and navigating gates! Works with all crawler bodies. Drill 2 holes (5mm or 13/64") per side an...
$21.99
RC4WD Front Bumper with Winch: SCX24 JLU
Micro Series Front Bumper w/ Plastic Winch for Axial SCX24 1/24 Jeep Wrangler RTR. SPECIFICATIONS...
Micro Series Front Bumper w/ Plastic Winch for Axial SCX24 1/24 Jeep Wrangler RTR. SPECIFICATIONS: Strong Durable Nylon Total Weight: 0.08oz / 2.5g INCLUDES: 1x Front Bumper 1x Winch Model 2x Tow Shackles 2x M1.2 x 3mm Cross Head Cap Self Tapping Screws (Black) 4x M1.2 x 5mm Cross Head Cap Self Tapping Screws (Black) Replacement Hardware: Cross Head Cap Self Tapping Screws M1.2 x 5mm Cross Head Cap Self Tapping Screws M1.2 x 3mm Note: Fits Axial SCX24 1/24 Jeep Wrangler RTR
$3.99
Traxxas Land Rover Defender Red Left & Right Fu...
Traxxas Land Rover Defender Red Left & Right Fuel Canisters with Jack (Fits #9712 Body): TRX-...
Traxxas Land Rover Defender Red Left & Right Fuel Canisters with Jack (Fits #9712 Body): TRX-4M, TRX4M
$4.99
Traxxas Ford Bronco (1) Front & (1) Rear Bumper...
Traxxas Ford Bronco (1) Front & (1) Rear Bumper: TRX-4M, TRX4M
Traxxas Ford Bronco (1) Front & (1) Rear Bumper: TRX-4M, TRX4M
$49.99
RIGID INDUSTRIES 2IN LED LIGHT BAR BLACK ANODIZED
Vanquish Products Aluminum Housing LED Light Bar Ultra scale low profile with extruded heat sink...
Vanquish Products Aluminum Housing LED Light Bar Ultra scale low profile with extruded heat sink fins Officially Licensed by Rigid Industries Operates on 11.1 volts Overall width for the 2in bar is 2.6in wide Comes partially assembled Includes the following: 1pc LED Light Bar 2pcs Universal L Bracket Mount 16pcs 0-80 SHCS 3/16 2pcs M3 x 0.5 BHCS 10mm 2pcs M3 Nylon Nuts 2pcs Washers 1pc Wiring Diagram by Harley Designs
$6.00
Sea Squirrel SLW Scale Rotors - 2.2" Directional
SLW Scale Rotors - 2.2" Directional Scale Directional Rotors snap over the SLW style hubs and can...
SLW Scale Rotors - 2.2" Directional Scale Directional Rotors snap over the SLW style hubs and can be installed on MOST 2.2" SLW wheels. Fits: VP, Lockedup RC, Injora (China), SuperShafty Hubs. Does not fit SSD Hubs. May fit other hubs but not tested. Adds approximately 1mm to your track width. Use existing hardware to mount. Includes: 2 left & 2 right rotors of the same color. (single rotors available upon request)
$3.00
Sea Squirrel Scale Side Exhaust
Scale Side Exhaust. Glue the Scale Side Exhaust to the side of your Lexan or hard bodied rig to g...
Scale Side Exhaust. Glue the Scale Side Exhaust to the side of your Lexan or hard bodied rig to give it that extra touch of customization. ShoeGoo, E6000 or CA Glue is recommended for mounting - Use as directed on product packaging.
$12.00
Sea Squirrel Scale Sand Ladder
Sea Squirrel Scale Sand Ladder Scale Recoveries are one of the most scale (and FUN) things you ca...
Sea Squirrel Scale Sand Ladder Scale Recoveries are one of the most scale (and FUN) things you can do with your RC Crawler. If you're stuck in sand or there's a face that you can't crawl on your own; use these Scale Sand Ladders make your Scale Recovery possible! Included: 1 pair of Sea Squirrel Scale Sand Ladder in chosen color.
$2.49
Traxxas Land Rover Defender Body LED Lens Set, ...
Traxxas Land Rover Defender Body LED Lens Set, (2) Headlights, (2) Tail Lights (Fits #9712 Body):...
Traxxas Land Rover Defender Body LED Lens Set, (2) Headlights, (2) Tail Lights (Fits #9712 Body): TRX-4M, TRX4M
$4.99
Traxxas Official Team Racing Decal Set (Flag Lo...
The official Team Traxxas Racing Decal sheet has been revised and now includes EZ-Start®, Stinger...
The official Team Traxxas Racing Decal sheet has been revised and now includes EZ-Start®, Stinger Motors, ProGraphix, TRX® Engines and www.Traxxas.com logos. Perfect for adding that “final touch” to your Traxxas ProGraphix® painted body, or your own personal painting schemes.
$11.99
RC4WD Micro Series Snorkel for Axial SCX24 1/24...
RC4WD VVV-C1047 Snorkel for Axial SCX24 1/24 Jeep Wrangler SPECIFICATIONS: Strong Durable Nylon ...
RC4WD VVV-C1047 Snorkel for Axial SCX24 1/24 Jeep Wrangler SPECIFICATIONS: Strong Durable Nylon Total Weight: 0.03oz / 1.0g INCLUDES: 1x Micro Series Snorkel for Axial SCX24 1/24 Jeep Wrangler RTR 1x M1.2 x 5mm Cross Head Cap Self Tapping Screws (Black) Replacement Hardware: Cross Head Cap Self Tapping Screws M1.2 x 5mm Notes: Fits Axial SCX24 1/24 Jeep Wrangler RTR
$7.99
RC4WD Micro Series Tire Holder for Jeep Wrangle...
Specifications: Strong Durable Nylon Length: 0.95in / 24.3mm Width: 0.84in / 21.4mm Weight: 0.0...
Specifications: Strong Durable Nylon Length: 0.95in / 24.3mm Width: 0.84in / 21.4mm Weight: 0.03oz / 1.0g What's Included: 1x Micro Series Tire Holder for Axial SCX24 1/24 Jeep Wrangler RTR Notes: Fits Axial SCX24 1/24 Jeep Wrangler RTR
$7.99
Traxxas Ford Bronco Front Bumper w/ Winch mount...
Traxxas Ford Bronco Front Bumper w/ Winch mount, Rear Bumper, Bumper Mounts, and Center Skid Plat...
Traxxas Ford Bronco Front Bumper w/ Winch mount, Rear Bumper, Bumper Mounts, and Center Skid Plate: TRX-4M, TRX4M
$4.99
Traxxas Ford Bronco Complete LED Lens Set for B...
Traxxas Ford Bronco Complete LED Lens Set for Body, Front & Rear (Fits #9711 Body): TRX-4M, T...
Traxxas Ford Bronco Complete LED Lens Set for Body, Front & Rear (Fits #9711 Body): TRX-4M, TRX4M
$3.99
Traxxas Ford Bronco Trail sights (left & right)...
Traxxas Ford Bronco Trail Left & Right Sights, Left, Right & Rear Door Handles, Left &...
Traxxas Ford Bronco Trail Left & Right Sights, Left, Right & Rear Door Handles, Left & Right Front Bumper Covers (Fits #9711 Body): TRX-4M, TRX4M
$5.99
Traxxas Ford Bronco Black Roof Body: TRX-4M, TRX4M
Traxxas Ford Bronco Black Roof Body (Fits #9711 Body): TRX-4M, TRX4M
Traxxas Ford Bronco Black Roof Body (Fits #9711 Body): TRX-4M, TRX4M
$9.99
Traxxas Ford Bronco Roof Rack, Spare Tire Cover...
Traxxas Ford Bronco Roof Rack, Spare Tire Cover, Cowl and Grille (fits #9711 body): TRX-4M, TRX4M
Traxxas Ford Bronco Roof Rack, Spare Tire Cover, Cowl and Grille (fits #9711 body): TRX-4M, TRX4M
$22.99
Pro-Line DIY Scale Accessory Assortment #8
The Pro-Line DIY Scale Accessory Assortment #8 includes a variety of injection-molded accessories...
The Pro-Line DIY Scale Accessory Assortment #8 includes a variety of injection-molded accessories, and is ready for your custom paint job! This DIY Scale Accessory Assortment #8 includes Fuel Cell, Nitro Bottle, Bottle Bracket, Fuel Pump, Fuel Regulator and Fire Pit Grate. Features: Injection Molded Highly Detailed Replica Accessories Adds Unparalleled Realism to your Scale Rock Crawler Can be Painted for the Ultimate Customizable Experience Perfect for 1:10 Crawlers and 1:10 Monster Trucks
$7.00
Sea Squirrel Chassis Brace 80mm (1 pair)
Sea Squirrel Chassis Brace 80mm (1 pair) Heavy Duty Chassis Braces for your custom RC Crawler bui...
Sea Squirrel Chassis Brace 80mm (1 pair) Heavy Duty Chassis Braces for your custom RC Crawler build! Includes: 2 - 80mm Chassis Braces Features: Large outside diameter for rigidity (7mm hex) Cut-To-Length with hack-saw (preferred) or utility knife 80mm long for use in most custom builds M3 mounting hole is FULL-LENGTH, meaning that you can cut to any length needed Minimum 10mm thread needed on each end of Chassis Brace for proper holding. Recommend to start bolts in Chassis Brace before ins...
$20.00
Sea Squirrel VS4-10 Rear Servo Winch Mount
Sea Squirrel VS4-10 Rear Servo Winch Mount A replacement rear chassis brace for the VS4-10 Chassi...
Sea Squirrel VS4-10 Rear Servo Winch Mount A replacement rear chassis brace for the VS4-10 Chassis (Chassis Kit, Origin, Pro, or Ultra) with clearance and mounting for MOST internal or external spooled servo winches. Mount using existing hardware This also provides enough room to use a Servo Winch with a Mojave Body mounted using our Sea Squirrel VS4-10 Mojave Mody Mounting Kit (SWB or LWB). Works with our Sea Squirrel VP VFD Transmission Rear Output Reverse Kit - SSVF-01 Works with our Sea ...
$39.00
Sea Squirrel VS4-10 Mojave Body Mount (4 door) LWB
Sea Squirrel VS4-10 Mojave Body Mount (4 door) LWB This kit is designed to mount the Mojave Long ...
Sea Squirrel VS4-10 Mojave Body Mount (4 door) LWB This kit is designed to mount the Mojave Long Wheel Base Body to the VS4-10 Chassis (Chassis Kit, Origin, Pro, Phoenix or Ultra). Based on the Recon G6 Certified GSpeed body mounts/sliders for maximum durability. Lowest center of gravity. Based on the Recon G6 Certified GSpeed body mounts/sliders for maximum durability. Includes: Body Mounts with integrated Sliders. Use existing skid mounting hardware to attach. All other hardware needed is i...
$10.00
Sea Squirrel Shock Cup Set - Icon/Incision
Shock Cup Set for Icon or Incision 90mm Shocks to use the Mini-T Springs (front springs) in place...
Shock Cup Set for Icon or Incision 90mm Shocks to use the Mini-T Springs (front springs) in place of the stock springs. Replaces the upper and lower spring retainers. Includes: 4 Lower Spring Retainers & 4 Upper Adapters of the same color.
$8.00
Sea Squirrel Scale Jerry Can - Mounted
Scale Jerry Can - Mounted Scale Jerry Can featuring integral mounting pan and strap. Measures 1-...
Scale Jerry Can - Mounted Scale Jerry Can featuring integral mounting pan and strap. Measures 1-5/8" (inches) tall and 1-3/16" (inch) wide and 7/16" (inch) deep, at the base. 2 mounting screws included.
$3.00
Sea Squirrel Scale Folded Shovel
Scale Folded Shovel Add this Scale Folded Shovel to your scale crawler for a added bit of scale. ...
Scale Folded Shovel Add this Scale Folded Shovel to your scale crawler for a added bit of scale. Measures 1-1/2" (inches) tall and 1/2" (inch) wide and 5/32" (inch) deep, at the base. ShoeGoo, E6000 or CA Glue is recommended for mounting - Use as directed on product packaging.
$14.49
REDCAT Scale Body Accessories (1set)
This is the replacement scale accessory kit used on the Everest Gen7 Pro truck. Package includes ...
This is the replacement scale accessory kit used on the Everest Gen7 Pro truck. Package includes sand ladders, high lift jack, fuel cans, shovel, axe and d-rings.
1 – 42 product(s) of 42