Drift Parts

YOKOMO PCS 48 Pitch Spur Gear

High precision PCS 48 Pitch Spur Gear Includes: 1 x Spur Gear

High precision PCS 48 Pitch Spur Gear Includes: 1 x Spur Gear

Yokomo YD-2 LF Big Bore Tapered Shock Piston (1...

The Yokomo YD-2 LF Big Bore Tapered Shock Piston. This is product developed by the Yokomo Drift m...

The Yokomo YD-2 LF Big Bore Tapered Shock Piston. This is product developed by the Yokomo Drift members. One side of the shock piston has been tapered. The damping feeling differs depending on the mounting direction. To soften the feeling on the extension place the tapered side to the bottom of the shock. To soften the feeling on the contraction place the tapered side towards the shock cap.The piston holes have a diagonal slope and also affect the fluid dynamics within the shock body. This ha...

Yokomo RWD Drift Spring Set (6) (2 Front, 4 Rear)

This Yokomo Rwd Drift Spring Set has been developed for the fine tuning of your chassis to fit a ...

This Yokomo Rwd Drift Spring Set has been developed for the fine tuning of your chassis to fit a surface type and track layout suited for drifting. With six different options, two for the front and four for the rear, it is easy to adjust your drift car to suit carpet, asphalt, concrete and other road surfaces. Due to the special characteristics of the material used to make them, the springs have not been coated or any treatment added to keep the springs at their original performance. Over tim...

Reve D RDX EZ Type Aluminum Wheel Hub (2)

Reve D RDX EZ Type Aluminum Wheel Hub. These are an optional accessory intended for the RDX drift...

Reve D RDX EZ Type Aluminum Wheel Hub. These are an optional accessory intended for the RDX drift car. Constructed from CNC machined aluminum these hubs offer increased strength and precision over the stock plastic hubs. In addition, by holding down the pin that secures the hub with an O-ring, any pin vibration is reduced giving you smooth drivetrain action. Package includes two offset aluminum wheel hubs, two drive pins and two O-rings.

Reve D Aluminum Spring Retainer, (2)

The Reve D Aluminum Spring Retainers increases suspension performance due to reduced spring movem...

The Reve D Aluminum Spring Retainers increases suspension performance due to reduced spring movement within the spring cups and retainers. Depending on your set up, the height of the spring retainers is offered in four different sizes. The 0mm type features the same specifications as the YD-2 Yokomo retainers, and the other three sizes can be used for different tuning options - or for a wide variety of other shock dampers and RC drift cars. Increasing offset size (larger offsets) increase cha...

Yokomo YD-2 Drift Cooling Fan Stay

This is an optional Yokomo YD-2 Cooling Fan Stay, intended for use with the YD-2S series. This mo...

This is an optional Yokomo YD-2 Cooling Fan Stay, intended for use with the YD-2S series. This mount is machined out of quality aluminum to be lightweight and strong. 

YOKOMO YD-2 ALUMINUM UL FRONT AXLE; (ADJUSTABLE...

New one piece aluminum front axle w/hex hub uses a hard anodized coating for increased strength a...

New one piece aluminum front axle w/hex hub uses a hard anodized coating for increased strength and also helps reduce normal wear. The original front axle started out at 4.4g. After great attention to detail, Yokomo has reduced the overall weight by 2.5g per axle to become as light as possible without sacrificing strength. At an impressive 1.9g per axle, this dramatically improves its rotation speed. Another great feature is that the offset can be easily adjusted by changing our the optional ...

Yokomo BD7 16mm Turnbuckle (2)

This is a pack of two replacement Yokomo 16mm Turnbuckles, and are intended for use with the Yoko...

This is a pack of two replacement Yokomo 16mm Turnbuckles, and are intended for use with the Yokomo BD7 1/10 scale touring car. These turnbuckles are used for the steering link and also as the rear roll bar links. 

Yokomo 20mm Front Turnbuckle (2)

This is a pack of two replacement Yokomo 20mm Front Turnbuckles. 

This is a pack of two replacement Yokomo 20mm Front Turnbuckles. 

REVE D SG Bell Crank Set for Slide Rack YD-2

The Reve D Bell Crank Set is an upgrade for Yokomo YD-2 drift cars. YD-2 owners must choose the c...

The Reve D Bell Crank Set is an upgrade for Yokomo YD-2 drift cars. YD-2 owners must choose the correct upgrade kit that is suited for their chassis and steering layout; bell crank style, or slide rack style. The ReveD Bell Crank Set moves the steering unit forward by 3 degrees, and improves the angle change of the steering tie rod during operation. This provides a more stable and predictable steering feel, which makes the car easier to drive on a variety of surfaces. In addition to that, tha...

Reve D SE Aluminum Adjustable Servo Horn (25T)

Reve D SE Aluminum Adjustable Servo Horn. This optional servo horn is adjustable from 19mm - 23mm...

Reve D SE Aluminum Adjustable Servo Horn. This optional servo horn is adjustable from 19mm - 23mm which allows for fine tuning of the steering throw. Package includes one servo horn and assembly hardware. This product was added to our catalog on June 1

Reve D RDX/MC-1 Aluminum Spur Gear Holder Set

Reve D RDX/MC-1 Aluminum Spur Gear Holder Set. This is an optional upgrade for the Reve D RDX dri...

Reve D RDX/MC-1 Aluminum Spur Gear Holder Set. This is an optional upgrade for the Reve D RDX drift car or MC-1 conversion kit. This aluminum gear holder gives you incredible strength while giving you the option to run aftermarket spur gears for additional adjustability. Package includes one inner gear holder plate, one outer gear holder plate, one drive pin and one lock nut.

Reve D PC Rear 32mm Spring Set w/Storage Box (3...

This package of Reve D PC Rear Springs provide you with an additional tuning option for RWD RC dr...

This package of Reve D PC Rear Springs provide you with an additional tuning option for RWD RC drift cars. The PC springs are specifically tuned for low grip conditions, specifically surfaces such as P tile, and colored concrete. This package includes three sets of springs, and are packaged inside of a small and compact plastic storage case.In addition to the stiffness of the springs, the springs are reversible, providing another layer of fine adjustment to your suspension and chassis. Pair t...

Yokomo YD-2S Rear Toe Control System

The Yokomo YD-2S Rear Toe Control System is designed to improve the running performance of the YD...

The Yokomo YD-2S Rear Toe Control System is designed to improve the running performance of the YD-2S series. This optional rear toe system allows for independent adjustment to the rear toe of the chassis. Aluminum lower caster blocks, aluminum hub carriers and graphite arm plates are used for a light weight and rigid finish. Using this system allows for "bump-in" which changes to toe-in as the suspension is compressed. This will allow for smoother entrances and more aggressive corner exits. P...

Yokomo YD-2 Drift Super Low Friction Aluminum B...

The Yokomo YD-2 SLF (Super Low Friction) Aluminum Big Bore Shock Set is an excellent optional sho...

The Yokomo YD-2 SLF (Super Low Friction) Aluminum Big Bore Shock Set is an excellent optional shock for your YD-2. Featuring black anodized aluminum parts and a low friction Kashima coating you get the style and performance your YD-2 deserves. Using a big bore shock body design matched with a super low friction Kashima coating and O-rings these will have dependable performance in the most demanding of situations. When using harsh riding resin tires common to drift setups these shocks can make...

YOKOMO PLASTIC DRIFT GEAR DIFF. ASSEMBLY YD-2/Y...

YOKOMO PLASTIC GEAR DIFF. ASSEMBLY YD-2/YZ-2 (Pre Assembled) (Y2-500GS-A) This gear differential ...

YOKOMO PLASTIC GEAR DIFF. ASSEMBLY YD-2/YZ-2 (Pre Assembled) (Y2-500GS-A) This gear differential unit of 2WD drift car YD-2. Body is already assembled, it comes with silicone oil of # 3000. Fits all versions of YD-2.

YOKOMO DRIFT SLIDE RACK SET (CENTER CRANK) FOR ...

YOKOMO SLIDE RACK SET (CENTER CRANK) FOR RD 2.0 This slide rack set can be bolted on the RD2.0. T...

YOKOMO SLIDE RACK SET (CENTER CRANK) FOR RD 2.0 This slide rack set can be bolted on the RD2.0. The servo can be mounted closer to the rear via center crank, increasing the rear load and stability.

Yokomo Aluminum Adjustable Drift Suspension Mou...

This is an optional Yokomo Adjustable Suspension Mount Set, anodized red and intended for used wi...

This is an optional Yokomo Adjustable Suspension Mount Set, anodized red and intended for used with the YD-2 series. This is an aluminum suspension mount set that best matches the limited red version of the YD-2 series. It is possible to upgrade further with other red anodized parts. This set includes two B (43.5-46.7 mm) for the front according to the short suspension arm specifications, and D (57.2-60.4 mm) and E (60.8-64.0 mm) for the rear, as well as hardware. 

Yokomo Aluminum Adjustable Drift Suspension Mou...

This is an optional Purple Yokomo Adjustable Suspension Mount Set, intended for use with the Limi...

This is an optional Purple Yokomo Adjustable Suspension Mount Set, intended for use with the Limited Edition Purple Yokomo YD-2 Drift Car Kit. Two B (43.5-46.7mm) mounts are included for the front according to the short suspension arm specifications, and D (57.2-60.4mm) and E (60.8-64.0mm) are included for the rear.

Yokomo Aluminum Adjustable Drift Suspension Mou...

This is an optional Yokomo Aluminum Suspension Mount Kit for the YD-2 series. This kit is the typ...

This is an optional Yokomo Aluminum Suspension Mount Kit for the YD-2 series. This kit is the type that holds the suspension pin via a bushing made of resin. Fine adjustment of the suspension pin angle is possible by changing the bushing. It is also possible to lower the suspension pin position than the standard, widening the setting width. The attached mounts are two for front A (39.5 - 42.7 mm), one for rear B (43.5 - 46.7 mm) and one for C (46.4 - 49.7 mm). Black bear edge treatment It als...

Yokomo 5.5mm YZ-2/YZ-4 HD Ball End Cap Set

This is the Yokomo 5.5mm YZ-2/YZ-4 HD Ball End Cap Set. This set has been updated with an increas...

This is the Yokomo 5.5mm YZ-2/YZ-4 HD Ball End Cap Set. This set has been updated with an increase on the ball part to 5.5mm, to accommodate the updated 5.5mm ball studs. Doing so, Yokomo has improved durability while maintaining the operation accuracy. Even with a heavier vehicle, there is no dropping out and it will be a tough suspension.

Yeah Racing 3x26mm 64 Titanium Turnbuckle (2)

This is a pair of 3x26mm 64 grade titanium turnbuckles from Yeah Racing.

This is a pair of 3x26mm 64 grade titanium turnbuckles from Yeah Racing.

Tekno RC EB410.2 Rod End Set

This is a replacement Tekno RC EB410.2 Rod End Set, intended for use with the EB410.2 Electric Bu...

This is a replacement Tekno RC EB410.2 Rod End Set, intended for use with the EB410.2 Electric Buggy Kit. 

Tekno RC 50mm Turnbuckle (2)

This is a replacement set of two Tekno RC 50mm Turnbuckles, intended for use with NB48 2.0 Compet...

This is a replacement set of two Tekno RC 50mm Turnbuckles, intended for use with NB48 2.0 Competition Off-Road Nitro Buggy Kit. These are the steering link turnbuckles. They measure 50mm long and have a 4mm adjustment nut. 

Team Associated 3x48mm Turnbuckles (2)

This is a pack of two replacement Team Associated 3x48mm Turnbuckles. These are used as steering ...

This is a pack of two replacement Team Associated 3x48mm Turnbuckles. These are used as steering turnbuckles on the B6 and B6D vehicles.

Reve D SG Bell Crank Set for Bell Crank (Yokomo...

The Reve D Bell Crank Set is an upgrade for Yokomo YD-2 drift cars. YD-2 owners must choose the c...

The Reve D Bell Crank Set is an upgrade for Yokomo YD-2 drift cars. YD-2 owners must choose the correct upgrade kit that is suited for their chassis and steering layout; bell crank style, or slide rack style. The ReveD Bell Crank Set moves the steering unit forward by 3 degrees, and improves the angle change of the steering tie rod during operation. This provides a more stable and predictable steering feel, which makes the car easier to drive on a variety of surfaces. In addition to that, tha...

Reve D RDX Steel Spool Cup (2)

Reve D RDX Steel Spool Outdrive. These optional steel outdrives offer increased life and durabili...

Reve D RDX Steel Spool Outdrive. These optional steel outdrives offer increased life and durability over the stock molded parts. Package includes two steel spool outdrives.

Reve D RDX Molded 48P Spur Gear (84T)

Reve D RDX Molded 48P Spur Gear. This is a replacement spur gear intended for the Reve D RDX drif...

Reve D RDX Molded 48P Spur Gear. This is a replacement spur gear intended for the Reve D RDX drift car. Package includes one 84T spur gear.

Reve D RDX Aluminum Knuckle Stopper, 3.0mm (2)

Reve D RDX Aluminum Knuckle Stopper. These optional knuckle stoppers are intended for the Reve D ...

Reve D RDX Aluminum Knuckle Stopper. These optional knuckle stoppers are intended for the Reve D RDX drift car. Available in multiple lengths these stoppers can be used to adjust your knuckle travel helping to fine tune your driving experience. Package includes two 3.0mm aluminum knuckle stoppers.

Reve D RDX Aluminum Front Knuckle (2)

The optional Reve D ASL (Aluminum Super Light) Front Knuckles for the Yokomo YD-2 provide high pe...

The optional Reve D ASL (Aluminum Super Light) Front Knuckles for the Yokomo YD-2 provide high performance, and excellent aesthetics. The design features as minimal amount of material as possible, while still providing improved strength over the original parts. Upper arm mounting positions feature two different holes, to help reduce the complexity of settings. These knuckles accept both 10x5x4mm bearings, and with optional 1mm spacers (sold separately), the ability to use 10x5x3 bearings to h...

REVE D RDX ALUMINUM BELL CRANK SET

This is an Aluminum bell crank set for RDX! The use of lightweight and highly rigid aluminum mate...

This is an Aluminum bell crank set for RDX! The use of lightweight and highly rigid aluminum material greatly increases the rigidity of the front area. By increasing the rigidity of the material itself and installing a bell crank that has been processed with high precision, the steering response performance will also become sharper. SE (Shiny Edge) processing is applied to each edge to improve the sense of luxury.The product is a set of center link and bell crank (left and right) and has the ...

REVE D MOLDED BALL CAPS, S/M/L (12)

This package of twelve Reve D Molded Ball Caps include four of each size ball cap, small, medium,...

This package of twelve Reve D Molded Ball Caps include four of each size ball cap, small, medium, and large. These rod ends feature an open type shape, which reduce overall friction, and allow for a more precise feel for connected components. Compatible only with linkage balls that are 4.3mm in diameter.

REVE D ALUMINUM REAR HUB CARRIER SET FOR RWD DRIFT

REVE D ALUMINUM REAR HUB CARRIER SET FOR RWD DRIFT (SE PROCESSING) We are excited to introduce ou...

REVE D ALUMINUM REAR HUB CARRIER SET FOR RWD DRIFT (SE PROCESSING) We are excited to introduce our new aluminum rear hub carrier that can be set according to the rear weight of your machine! The new optional parts enable you to adjust the roll center by offering two outer suspension pin positions, it’s now possible to find the best set-up according to the rear weight of the machine. ♦Outer pin upper holeLowering the roll center triggers more roll, making it easier to gain lateral grip even on...