Motors

$90.00

CRAWLMASTER BLACK BL 540 STUBBY 10-POLE SENSORL...

Features: Ten pole 16mm length Kevlar wrapped rotor with 180c rated magnets Twelve slot stator w...

Features: Ten pole 16mm length Kevlar wrapped rotor with 180c rated magnets Twelve slot stator with 200c rated resin impregnated coils 14g phase wires with higher quality 4mm compression bullets installed Oversized ABEC-7 bearings Sealed can 8 blind mounting holes Shorter than a normal 540 motor Specs: 25mm 8 hole mounting pattern M3 mounting screws (5mm depth max, we recommend using 6mm screws for most installs) 3.175mm shaft 36mm diameter 45mm length 149g (5.26oz) with wires 50,000 rpm m...

$12.88

66T HT Motor with 11T Gear: SCX24

NOTE: Requires Hot Racing Motor Mount (HRASXTF18SS) and modification battery mount post to allow ...

NOTE: Requires Hot Racing Motor Mount (HRASXTF18SS) and modification battery mount post to allow the use of this longer motor, or relocation of your battery depending on set up.Features: High Torque Magnet and Rotor Tuned for Rock Climbing Larger 050 size can Specifications:Brass Pinion Gear: 64P 11TRated Voltage: 7.4 VTotal length: 1.12in / 28.5mmOutput Shaft length: 0.20in / 5.1mmOutput Shaft OD: 0.06in / 1.5mmWeight: 0.67oz / 19gIncludes: (1) 050 HT 66T motor with 11T brass gear with wi...

$19.99

TrailMaster Sport 550 21t

FEATURES: Zero timing, universal installation and rotation direction 1/8th inch shaft diameter 3...

FEATURES: Zero timing, universal installation and rotation direction 1/8th inch shaft diameter 36mm OD x 57mm length (not including shaft) 217g weight m3 mount holes, 25mm spacing, "540" standard ball bearing on output bronze bushing on end bell High strength Y45 Ferrite magnets

$20.99 $21.99 (2 variants)

INJORA Brushed Motor for Axial SCX24

INJORA Brushed Motor 66T 50T for 1:24 RC Crawler Axial SCX24 AXI90081 AXI00002 AXI00001 AXI00004 ...

INJORA Brushed Motor 66T 50T for 1:24 RC Crawler Axial SCX24 AXI90081 AXI00002 AXI00001 AXI00004 Upgrade PartsNotes: 050 motors require a different mounting plate with 2 extra holes. 050 motors are longer than stock motor, so one of the battery tray posts needs to be cut off to fit. Suit for: Upgrade motor parts for Axial SCX24Features: High Torque Magnet and Rotor Tuned for Rock Climbing 050 66T Motor II Specifications: Size: longer than stock motor Turn: 66T Weight: 19g Rated Voltage: ...

$7.99

Dynamite SCX24 Motor w/Pinion

The Dynamite SCX24 Motor with Pinion is a replacement motor intended for use with the Axial 1/24 ...

The Dynamite SCX24 Motor with Pinion is a replacement motor intended for use with the Axial 1/24 Scale Deadbolt Mini Crawler. This package contains one motor with pinion and two screws.

$84.99

Holmes Hobbies Revolver V2 2200KV

Do you need a small and light motor for your vehicle, but do not want to sacrifice torque? Do you...

Do you need a small and light motor for your vehicle, but do not want to sacrifice torque? Do you want the finest sensorless brushless low speed control? The Revolver 540 is an extremely torque dense and lightweight choice with exceptional startup and feel that rivals brushed motors!  The 540 model is two times more powerful than the "Snubnose 540" model, and provides an unmatched torque-dense driving sensation similar to a diesel engine.   Applications: 1:10 scale Trail and Scale rigs (SCX1...

$14.99

Holmes Hobbies CrawlMaster Sport 540 13t

FEATURES: 5 slot rotor for industry leading smoothness Zero timing, universal installation and r...

FEATURES: 5 slot rotor for industry leading smoothness Zero timing, universal installation and rotation direction 1/8th inch shaft diameter 36mm OD x 52mm length (not including shaft) 178g weight m3 mount holes, 25mm spacing, "540" standard ball bearing on output bronze bushing on end bell High strength magnets

$19.99

HOLMES HOBBIES CRAWLMASTER SPORT 550 13T

FEATURES: 5 slot rotor for industry leading smoothness Zero timing, universal installation and r...

FEATURES: 5 slot rotor for industry leading smoothness Zero timing, universal installation and rotation direction 1/8th inch shaft diameter 36mm OD x 57mm length (not including shaft) 215g weight m3 mount holes, 25mm spacing, "540" standard ball bearing on output bronze bushing on end bell High strength magnets

$9.99

HOLMES HOBBIES BRUSHED MOTOR LEADS

A pair of motor leads with high current 4mm male bullet plugs. Handy for brushed motors. 13ga hig...

A pair of motor leads with high current 4mm male bullet plugs. Handy for brushed motors. 13ga high strand silicon coated wire 6" long insulated.

$16.99

Holmes Hobbies TrailMaster Sport 540 27T

FEATURES: Zero timing, universal installation and rotation direction 1/8th inch shaft diameter m...

FEATURES: Zero timing, universal installation and rotation direction 1/8th inch shaft diameter m3 mount holes, 25mm spacing, "540" standard ball bearing on output side bronze bushing on end bell side High strength Y45 Ferrite magnets

$174.99

Holmes Hobbies Crawlmaster Magnum Stubby 13T

CrawlMaster Magnum 540 13t- High torque, smoothest startup, lightweight and small! . Please allow...

CrawlMaster Magnum 540 13t- High torque, smoothest startup, lightweight and small! . Please allow 2 weeks for assembly and manufacture. These are currently made to order. The Magnum is a performance oriented brushed motor designed with a larger rotor diameter and more powerful Neodymium magnets, when compared to the regular TorqueMaster and CrawlMaster Pro 540. This motor was born out of prototype work for our team drivers and a love for the hobby. The "Stubby" version is smaller and lighter,...

$99.99

CRAWLMASTER PURPLE BL 540 STUBBY 10-POLE SENSOR...

Features: Ten pole 16mm length Kevlar wrapped rotor with 180c rated magnets Twelve slot stator w...

Features: Ten pole 16mm length Kevlar wrapped rotor with 180c rated magnets Twelve slot stator with 200c rated resin impregnated coils 14g phase wires with higher quality 4mm compression bullets installed Oversized ABEC-7 bearings Sealed can 8 blind mounting holes Shorter than a normal 540 motor Specs: 25mm 8 hole mounting pattern M3 mounting screws (5mm depth max, we recommend using 6mm screws for most installs) 3.175mm shaft 36mm diameter 45mm length 149g (5.26oz) with wires 50,000 rpm m...

$19.99

CrawlMaster Sport 550 12T

FEATURES: 5 slot rotor for industry leading smoothness Zero timing, universal installation and r...

FEATURES: 5 slot rotor for industry leading smoothness Zero timing, universal installation and rotation direction 1/8th inch shaft diameter 36mm OD x 57mm length (not including shaft) 215g weight m3 mount holes, 25mm spacing, "540" standard ball bearing on output bronze bushing on end bell High strength magnets

$126.99

Firma 85A Brushless Smart ESC / 3300Kv Sensorle...

Spektrum Firma 85A Smart ESC for surface vehicles is waterproof and delivers power and intelligen...

Spektrum Firma 85A Smart ESC for surface vehicles is waterproof and delivers power and intelligence all-in-one. Without additional sensors or modules, they feed battery and ESC telemetry data straight to your radio in real time, all over one connection. Now includes a compatible 3300Kv Firma Brushless Sensorless motor when you purchase the combo

$99.99

Holmes Hobbies Crawlmaster Pro 540 11T

IMPORTANT! For use in the Axial Wraith on 3s lipo (11.1v) you must use a 16t pinion to avoid over...

IMPORTANT! For use in the Axial Wraith on 3s lipo (11.1v) you must use a 16t pinion to avoid overheating the motor! When you need the smoothest power delivery available, the Crawlmaster Pro is the best choice. Holmes guarantees the finest parts and construction techniques available. Our building team has a combined 45 years of experience. We have provided motors for 1st place competitors, robotics, and off road vehicles around the world! Our professionally crafted motors begin with Japanese q...

$43.99

Treal Traxxas TRX-4 Brass Outer Portal Covers 4...

Product description Treal Traxxas TRX-4 Brass Outer Portal Covers 42g(2pcs) Black with Brake Mot...

Product description Treal Traxxas TRX-4 Brass Outer Portal Covers 42g(2pcs) Black with Brake Motor Set 1. Material: Brass2. Fit in Traxxas trx-4 1:10 LANDROVER and Ford Bronco Front and Rear Wheels3. Weight: 42g/unit (84g for one pair)4. Package:-2pcs of main brass weights-2pcs brake-2pcs capliper-Hardware

$90.00

CRAWLMASTER BL 540 STUBBY 10-POLE SENSORLESS RO...

Features: Ten pole 16mm length Kevlar wrapped rotor with 180c rated magnets Twelve slot stator w...

Features: Ten pole 16mm length Kevlar wrapped rotor with 180c rated magnets Twelve slot stator with 200c rated resin impregnated coils 14g phase wires with higher quality 4mm compression bullets installed Oversized ABEC-7 bearings Sealed can 8 blind mounting holes Shorter than a normal 540 motor Specs: 25mm 8 hole mounting pattern M3 mounting screws (5mm depth max, we recommend using 6mm screws for most installs) 3.175mm shaft 36mm diameter 45mm length 149g (5.26oz) with wires 50,000 rpm m...

$149.99

PULLER PRO R 540-L V2 ROCK CRAWLER MOTOR 4100KV

Features: Four pole 18mm diameter x 31mm length rotor Twelve slot stator, 180C resin impregnated...

Features: Four pole 18mm diameter x 31mm length rotor Twelve slot stator, 180C resin impregnated copper windings 200C rated high strength neodymium magnets Oversized bearings Sensored Waterproof sensor board Sensor wire included Specs: "550" size motor 25mm mount pattern M3 mounting screws 5mm shaft 36mm diameter 60.5mm length 236.5g 60,000 rpm max

$149.99

PULLER PRO R 540-L V2 ROCK CRAWLER MOTOR 2100KV

Features: Four pole 18mm diameter x 31mm length rotor Twelve slot stator, 180C resin impregnated...

Features: Four pole 18mm diameter x 31mm length rotor Twelve slot stator, 180C resin impregnated copper windings 200C rated high strength neodymium magnets Oversized bearings Sensored Waterproof sensor board Sensor wire included Specs: "550" size motor 25mm mount pattern M3 mounting screws 5mm shaft 36mm diameter 60.5mm length 236.5g 60,000 rpm max

$55.00

TRAILMASTER PRO 540 BRUSHLESS ROCK CRAWLER MOTO...

SPECIFICATIONS: Waterproofed sensor board for reliable underwater operation 540 two pole sensore...

SPECIFICATIONS: Waterproofed sensor board for reliable underwater operation 540 two pole sensored brushless motor 14mm diameter rotor, N35UH material for high torque and heat resistance 1/8in shaft sensor wire included 2s-4s LiPo capable 36mm diameter, 53mm length 198g (7oz)

$14.99

CrawlMaster Sport 540 20t

FEATURES: 5 slot rotor for industry leading smoothness Zero timing, universal installation and r...

FEATURES: 5 slot rotor for industry leading smoothness Zero timing, universal installation and rotation direction 1/8th inch shaft diameter 36mm OD x 52mm length (not including shaft) 178g weight m3 mount holes, 25mm spacing, "540" standard ball bearing on output bronze bushing on end bell High strength magnets

$6.99

Holmes Hobbies Sensor Wire 6"

Sensor wire for your sensored brushless setup! Standard six-pin sensor plugs.

Sensor wire for your sensored brushless setup! Standard six-pin sensor plugs.

$174.99

Holmes Hobbies Crawlmaster Magnum Stubby 11T

CrawlMaster Magnum 540 11t- High torque, smoothest startup, lightweight and small! . The Magnum i...

CrawlMaster Magnum 540 11t- High torque, smoothest startup, lightweight and small! . The Magnum is a performance oriented brushed motor designed with a larger rotor diameter and more powerful Neodymium magnets, when compared to the regular TorqueMaster and CrawlMaster Pro 540. This motor was born out of prototype work for our team drivers and a love for the hobby. The "Stubby" version is smaller and lighter, specifically for competitive drivers who want top performance in a small and light pa...

$89.99

Holmes Hobbies Torquemaster Pro 540 27T

When you have a need for power that isn't satisfied by a normal brushed motor, it's time to step ...

When you have a need for power that isn't satisfied by a normal brushed motor, it's time to step it up a notch with a precision-built hand wound motor! The Holmes Hobbies TorqueMaster Pro 540 is a hand built with the finest parts and construction techniques available. Our building team has a combined 45 years of experience! We guarantee the finest and most up to date construction in our Pro motors. With podium spots and overall wins at state, regional, and national events worldwide, this moto...

$143.74

Holmes Hobbies Team Puller 400 Crawl 11T XX

The Puller 400 is the pinnacle of Crawler motors for ultimate performance! It is lighter and smal...

The Puller 400 is the pinnacle of Crawler motors for ultimate performance! It is lighter and smaller in diameter than a regular 540 motor, yet packs enough power and punch to get you through those tough sections. This motor was born out of prototype work for our team drivers, and now you can have the edge too! SPECIFICATIONS: 0.058" thick Steel can Aluminum Faceplate 303 Stainless timing hardware NEH35 grade Neodymium Magnets 7075 Aluminum End Bell Hardware 5 slot skewed armature Thick X fil...

$84.99

Holmes Hobbies Revolver V2 1400KV

Do you need a small and light motor for your vehicle, but do not want to sacrifice torque? Do you...

Do you need a small and light motor for your vehicle, but do not want to sacrifice torque? Do you want the finest sensorless brushless low speed control? The Revolver 540 is an extremely torque dense and lightweight choice with exceptional startup and feel that rivals brushed motors!  The 540 model is two times more powerful than the "Snubnose 540" model, and provides an unmatched torque-dense driving sensation similar to a diesel engine.   Applications: 1:10 scale Trail and Scale rigs (SCX1...

$57.99

Holmes Hobbies Torquemaster Expert 540 27T

When you need a quality motor, look no further than the TorqueMaster Expert 540 from Holmes! The ...

When you need a quality motor, look no further than the TorqueMaster Expert 540 from Holmes! The Expert series features the same quality construction as our Pro motors, but with a machine wound armature for an affordable alternative that won't break the bank.   FEATURES: Machine-Wound Armature Standup Brush and 10mm commutator Gold-plated copper brush hood to resist corrosion and provide lowest resistance 5mm web 3 slot armature- Maximizes torque and efficiency Can – 1.4mm thick can features...

$57.99

Holmes Hobbies Crawlmaster Expert 540 13T

The Crawlmaster Sport is the SMOOTHEST budget motor built for messy, dirty, off road action. Whet...

The Crawlmaster Sport is the SMOOTHEST budget motor built for messy, dirty, off road action. Whether on the rocks or in the dirt, the Crawlmaster Sport is perfectly at home. Great choice for young drivers, running in the muck without ruining an expensive motor, or just crawling on a budget.   FEATURES: 5 slot rotor for industry leading smoothness Zero timing, universal installation and rotation direction 1/8th inch shaft diameter 36mm OD x 52mm length (not including shaft) 178g weight m3 mo...

$84.99

Team Brood Creep Hand Wound 540 3 Segment Quad ...

The Team Brood Creep Hand Wound 540 3 Segment Quad Magnet Brushed Motor was developed to produce ...

The Team Brood Creep Hand Wound 540 3 Segment Quad Magnet Brushed Motor was developed to produce the stump pulling, neck snapping, granny gear torque that scalers crave. Each motor is custom built from the ground up. Starting with Team Brood's Exclusive 4-magnet teardown, this motor produces more power, more RPM, and smoother low speed resolution than any other 4-magnet motor on the market.The armatures are hand wound with precision by the best in the business using optimized wire gauges for ...

$479.99

Redcat Kaiju EXT 1/8 RTR 4WD 6S Brushless Monst...

The Redcat Kaiju EXT 1/8 RTR 4WD 6S Brushless Monster Truck is a high performance monster truck o...

The Redcat Kaiju EXT 1/8 RTR 4WD 6S Brushless Monster Truck is a high performance monster truck option developed for bashers. The Kaiju EXT features an extended wheelbase, along with some major performance upgrades - like belted tires, motor heatsink with fan, redesigned motor mount, metal servo horn, rear wing and a race bred body with working air scoop. The Kaiju EXT’s chassis provides the truck with a wheelbase of 360mm. That’s an additional 51mm of wheelbase over the original Kaiju, and ...

$14.99

HOLMES HOBBIES RETRO SPORT 540 21T

Retro Sport 540 21t   The Retro Sport 540 motor is designed for efficient mod-motor power output ...

Retro Sport 540 21t   The Retro Sport 540 motor is designed for efficient mod-motor power output for your classic Tamiya, Kyosho, Assosicated, Losi, and other 2wd buggies, with long-lasting affordable performance!  Also great in Clodbusters! The Retro Sport motor’s integrated cooling fan pulls cool air through the motor to keep temperatures down. Higher grade magnets as compared to normal sealed cans increase efficiency and torque.   The addition of a ball bearing on the output increases effi...

$57.99

E-flite Park 480 Brushless Outrunner Motor (910kV)

Features Perfect match for 3D park flyers weighing 20–30 oz (565–850 g) Ideal for scale park fly...

Features Perfect match for 3D park flyers weighing 20–30 oz (565–850 g) Ideal for scale park flyers 25–35 oz (710–990 g) Ideal for models requiring up to 250 watts of power High-torque, direct-drive alternative to inrunner brushless motors Includes mount, prop adapters and mounting hardware External rotor design, 4mm shaft can easily be reversed for alternative motor installations Slotted 12-pole outrunner design Quiet, lightweight operation High quality construction with ball bearings and h...

$10.00

Traxxas TRX4 Titan 550 Reverse Rotation Motor (...

The Titan 550 is a 21-turn fan-cooled 550 size motor capable of handling 14.4 volts. This powerfu...

The Titan 550 is a 21-turn fan-cooled 550 size motor capable of handling 14.4 volts. This powerful motor has a 30% longer armature than a standard 540 size motor for extreme monster torque. Key Features: 21 turn/ 14V fan-cooled 30% longer armature

$99.99

PULLER PRO V2 ROCK CRAWLER MOTOR - STUBBY - 1800KV

Features: Four pole 18mm diameter x 16mm length rotor Twelve slot stator 13g phase wires with 4m...

Features: Four pole 18mm diameter x 16mm length rotor Twelve slot stator 13g phase wires with 4mm bullets installed Oversized bearings Sensored with adjustable timing Waterproof sensor board Includes sensor wire Specs: Shorter than a 540 motor 25mm mounting pattern M3 mounting screws 3.175mm shaft 36mm diameter 45mm length 164g (5.8oz) with wires 50,000 rpm max

$57.49

Holmes Hobbies Torquemaster Expert 540 40T

When you need a quality motor, look no further than the TorqueMaster Expert 540 from Holmes! The ...

When you need a quality motor, look no further than the TorqueMaster Expert 540 from Holmes! The Expert series features the same quality construction as our Pro motors, but with a machine wound armature for an affordable alternative that won't break the bank. FEATURES: Machine-Wound Armature Standup Brush and 7.5mm commutator Gold-plated copper brush hood to resist corrosion and provide lowest resistance 5mm web 3 slot armature- Maximizes torque and efficiency Can – 1.4mm thick can features ...

$84.99

Holmes Hobbies Revolver V2 1000 KV

Do you need a small and light motor for your vehicle, but do not want to sacrifice torque? Do you...

Do you need a small and light motor for your vehicle, but do not want to sacrifice torque? Do you want the finest sensorless brushless low speed control? The Revolver 540 is an extremely torque dense and lightweight choice with exceptional startup and feel that rivals brushed motors!  The 540 model is two times more powerful than the "Snubnose 540" model, and provides an unmatched torque-dense driving sensation similar to a diesel engine.   Applications: 1:10 scale Trail and Scale rigs (SCX1...

$143.74

Holmes Hobbies Team Puller 500 Crawl 13T XX

The Puller 500 is the pinnacle of crawler motors for ultimate performance! It is lighter and smal...

The Puller 500 is the pinnacle of crawler motors for ultimate performance! It is lighter and smaller in diameter than a regular 540 motor, yet packs the same power and punch to get you through those tough sections. This motor was born out of prototype work for our team drivers, and now you can have the edge too! Three or five slot skewed armature gives unmatched startup control with great wheel speed and power. Thick can yields highest torque and power, great for shafties and power hungry MOA...

$143.74

Holmes Hobbies Team Puller 500 Crawl 11T XX

The Puller 500 is the pinnacle of crawler motors for ultimate performance! It is lighter and smal...

The Puller 500 is the pinnacle of crawler motors for ultimate performance! It is lighter and smaller in diameter than a regular 540 motor, yet packs the same power and punch to get you through those tough sections. This motor was born out of prototype work for our team drivers, and now you can have the edge too! Three or five slot skewed armature gives unmatched startup control with great wheel speed and power. Thick can yields highest torque and power, great for shafties and power hungry MOA...

$57.49

Holmes Hobbies Torquemaster Expert 540 55T

When you need a quality motor, look no further than the TorqueMaster Expert 540 from Holmes! The ...

When you need a quality motor, look no further than the TorqueMaster Expert 540 from Holmes! The Expert series features the same quality construction as our Pro motors, but with a machine wound armature for an affordable alternative that won't break the bank. FEATURES: Machine-Wound Armature Standup Brush and 7.5mm commutator Gold-plated copper brush hood to resist corrosion and provide lowest resistance 5mm web 3 slot armature- Maximizes torque and efficiency Can – 1.4mm thick can features ...

$57.49

Holmes Hobbies Torquemaster Expert 540 30T

When you need a quality motor, look no further than the TorqueMaster Expert 540 from Holmes! The ...

When you need a quality motor, look no further than the TorqueMaster Expert 540 from Holmes! The Expert series features the same quality construction as our Pro motors, but with a machine wound armature for an affordable alternative that won't break the bank.   FEATURES: Machine-Wound Armature Standup Brush and 7.5mm commutator Gold-plated copper brush hood to resist corrosion and provide lowest resistance 5mm web 3 slot armature- Maximizes torque and efficiency Can – 1.4mm thick can feature...

$49.99

Holmes Hobbies Torquemaster Expert 540 13T

DESCRIPTION When you need a quality motor, look no further than the TorqueMaster Expert 540 f...

DESCRIPTION When you need a quality motor, look no further than the TorqueMaster Expert 540 from Holmes! The Expert series features the same quality construction as our Pro motors, but with a machine wound armature for an affordable alternative that won't break the bank.   FEATURES: Machine-Wound Armature Standup Brush and 7.5mm commutator Gold-plated copper brush hood to resist corrosion and provide lowest resistance 5mm web 3 slot armature- Maximizes torque and efficiency Can – 1.4mm t...

$174.99

Holmes Hobbies Crawlmaster Magnum 540 20T

CrawlMaster Magnum 540 20t- High torque, smoothest startup in all our products, wheelspeed simila...

CrawlMaster Magnum 540 20t- High torque, smoothest startup in all our products, wheelspeed similar to TorqueMaster Pro 540 30t. Please allow 2 weeks for assembly and manufacture. These are currently made to order. The Magnum is a performance oriented brushed motor designed with a larger rotor diameter and more powerful Neodymium magnets, when compared to the regular TorqueMaster and CrawlMaster Pro 540. This motor was born out of prototype work for our team drivers and a love for the hobby. S...

$99.99

Holmes Hobbies Crawlmaster Pro 540 16T

IMPORTANT! For use in the Axial Wraith on 3s lipo (11.1v) you must use a 16t pinion to avoid over...

IMPORTANT! For use in the Axial Wraith on 3s lipo (11.1v) you must use a 16t pinion to avoid overheating the motor! When you need the smoothest power delivery available, the Crawlmaster Pro is the best choice. Holmes guarantees the finest parts and construction techniques available. Our building team has a combined 45 years of experience. We have provided motors for 1st place competitors, robotics, and off road vehicles around the world! Our professionally crafted motors begin with Japanese q...

$99.99

Holmes Hobbies Crawlmaster Pro 540 13T

IMPORTANT! For use in the Axial Wraith on 3s lipo (11.1v) you must use a 16t pinion to avoid over...

IMPORTANT! For use in the Axial Wraith on 3s lipo (11.1v) you must use a 16t pinion to avoid overheating the motor! When you need the smoothest power delivery available, the Crawlmaster Pro is the best choice. Holmes guarantees the finest parts and construction techniques available. Our building team has a combined 45 years of experience. We have provided motors for 1st place competitors, robotics, and off road vehicles around the world! Our professionally crafted motors begin with Japanese q...

$84.99

Team Brood Foresaken Hand Wound 5 Segment Dual ...

The Brood Foresaken Handwound 5 Segment Dual Magnet 540 Crawling Motor is a power plant designed ...

The Brood Foresaken Handwound 5 Segment Dual Magnet 540 Crawling Motor is a power plant designed specifically to make insane torque and have superior braking and holding power compared to a quad magnet equivalent. The Foresaken utilizes a 5-Slot Straight Armature for the smoothest startup possible for your truck. Each motor is custom built from the ground up, beginning with exclusive teardowns. The armatures are hand wound with precision by the best in the business using optimized wire gauge...

$99.99

Team Brood Annihilator Hand Wound 5 Segment Dua...

The Team Brood Annihilator Handwound 5 Segment Dual Magnet 550 Crawling Motor is a premium level,...

The Team Brood Annihilator Handwound 5 Segment Dual Magnet 550 Crawling Motor is a premium level, 550 motor option. Each motor is custom built from the ground up, beginning with Exclusive teardowns. The armatures are hand wound with precision by the best in the business using optimized wire gauges for ultimate horsepower. Each armature is epoxy dipped to ensure durability and epoxy balanced to a zero tolerance for the smoothest power delivery possible. The assembly process is a rigorous one i...

$89.99

Team Brood Slither Hand Wound 3 Segment Quad Ma...

The Brood Slither Handwound 3 Segment Quad Magnet 540 Crawling Motor foundation starts with Team ...

The Brood Slither Handwound 3 Segment Quad Magnet 540 Crawling Motor foundation starts with Team Brood's exclusive 4-magnet teardown, producing more power, more RPM, and smoother low speed resolution than any other 4-magnet motor on the market. The Slither utilizes a 3-Slot Skewed Armature for improved startup without sacrificing torque or braking. Each motor is custom built from the ground up, beginning with Exclusive teardowns. The armatures are hand wound with precision by the best in the...

$84.99

Team Brood Maelstrom 540 TS2 Hand Wound 5 Segme...

The Brood Maelstrom TS2 Handwound 3 Segment 540 Crawling Motor is a power plant designed specific...

The Brood Maelstrom TS2 Handwound 3 Segment 540 Crawling Motor is a power plant designed specifically to make insane torque and have superior braking and holding power. These Teardowns feature a CNC machined can that provides optimal performance over a stamped can due to the much more accurate tolerances. The Maelstrom utilizes a 3-Slot Straight Armature for the best possible torque and braking for your truck. Each motor is custom built from the ground up, beginning with Exclusive teardowns....

$29.99

Team Brood Ravage Machine Wound 540 5 Segment D...

The Team Brood Ravage Machine Wound 540 5 Segment Dual Magnet Brushed Motor is a budget friendly ...

The Team Brood Ravage Machine Wound 540 5 Segment Dual Magnet Brushed Motor is a budget friendly motor option that doesn't skimp on features or power. Ravage series motors have been built using a strict assembly process that includes hand shimming the armature and precision brush hood alignment, and is then finished off with a low impact break in and dyno test to ensure that each motor meets strict criteria. This is done to extract all the power from this machined wound option, and provide bu...

$89.99

Team Brood Devastator Handwound 550 3 Segment D...

The Team Brood Devastator Handwound 550 3 Segment Dual Magnet Brushed Motor has been custom built...

The Team Brood Devastator Handwound 550 3 Segment Dual Magnet Brushed Motor has been custom built from the ground up, and is a great choice as a high performance replacement for your TRX-4 or Redcat Gen8. Starting with Exclusive teardowns, the armatures are hand wound with precision using optimized wire gauges to create incredible horsepower. Each armature is epoxy dipped for durability using aerospace grade epoxy resin and drill balanced to a zero tolerance to provide the smoothest power del...