SuperShafty "CP43" Custom COMPLETE Axle System

SuperShafty "CP43" Custom Axle System

NEW FOR SUMMER 2024:

• These axles now are available in an assembly, in one easy purchase click.
• Just add grease and mount them up and go run! 
• Cheaper than the cost of buying all the parts separately.
• ALSO the housings are still available as they used to be (Links below) 

Included in Steering axle Complete package for $399.99:

• SuperShafty Steering Portal Axle housing  - $289.99
  • SuperShafty Axle center section
  • SuperShafty 2 differential bearing retainers
  • SuperShafty 2 x Capra/10.3 Style Stub shafts 
  • SuperShafty 2 x Universal Axle shafts
  • SuperShafty 1 x 6mm Low Rise 4th link/Panhard mount
  • SuperShafty 1 x Behind Axle Servo Mount
  • Bearings and Hardware needed.
• SuperShafty AR44 Style Spool - $17.99
• SuperShafty AR44 Style Ring and Pinion - $39.99
• SuperShafty 2.5mm Dowel Pins - $5.99
• SuperShafty 2 x Aluminum Steering portal knuckles - $59.99
  • SuperShafty 2 x Aluminum Portal box covers 
• Axial 2 x 12mm Hexes - $6.99
• SuperShafty Portal Gears (Choice of Ratio) - $28.99
  
  • Overdrive ratios Suggested for use in the front axle only
    • Wild: 20/15 set is 30% Difference in gear ratio, compared to stock gears. (36% Overdrive)
    • Mild: 21/14 set is 20% Difference in gear ratio, compared to stock gears. (24% Overdrive)
    • Standard: 23/12 set is 0% Difference in stock ratio.

Included in Rear axle Complete package for $269.99:

• SuperShafty Straight Portal Axle housing - $189.99
  • SuperShafty Axle center section
  • SuperShafty 2 differential bearing retainers
  • SuperShafty 2 x Capra/10.3 Style Stub shafts
  • SuperShafty 2 x Straight Axle shafts
  • SuperShafty 2 x Aluminum Portal box covers 
  • Bearings and Hardware needed.
• SuperShafty AR44 Style Spool - $17.99
• SuperShafty AR44 Style Ring and Pinion - $39.99
• SuperShafty 2.5mm Dowel Pins - $5.99
• Axial 2 x 12mm Hexes - $6.99
• Team Garage Hack Portal gears 12/23 - $28.99

Key Features:

• One Piece housing construction
• Machined from 7075 Aluminum
• Increased Caster Angle to 20° for improved steering without side effects of leaning them too far back. (Most Stock is 8°)
• Externally Limited to 50° of side to side steering, but easily modified for more should you desire. (5° over stock Capra/10.3 axles)
• Ability to run 3 link with Panhard as a drop in replacement for a 10.3 axle.
• OR Run 3 link with CMS Steering link by Hardcore RC
• OR Run 4 link with AMS Steering link by Hardcore RC

Replacement Parts (Or if you would rather buy the parts individually):

• CP43 Steering Axle Housing by SuperShafty
• CP43 Straight Axle Housing by SuperShafty
• Capra/AR44 Style Spool by SuperShafty
• Capra/AR44 Style Ring and Pinion Gears by SuperShafty
• Capra/10.3 Style Portal Box Gears by SuperShafty
• Capra/10.3 Style Knuckles (For Steering version) by SuperShafty 
• CP43 Steering Links by Hardcore RC
• CP43 Short Panhard Mount by SuperShafty
• Portal Gears by SuperShafty (Choice of Ratio)
  
  • Overdrive ratios Suggested for use in the front axle only
    • Wild: 20/15 set is 30% Difference in gear ratio, compared to stock gears. (36% Overdrive)
    • Mild: 21/14 set is 20% Difference in gear ratio, compared to stock gears. (24% Overdrive)
    • Standard: 23/12 set is 0% Difference in stock ratio.
• SuperShafty CP44, CP43, CP41 Brass Portal Covers

Dimensions:

• CP43's are a Custom Axle Dimension.
• They are slightly wider than Axial 10.3
• They are a good bit narrower than Axial Capra
• They are similar in size to Vanquish F10's
• Use them like "Franks Red Hot" - Put them on everything.

Compatibility:

• Our housings will come with top Axle shafts, because nobody is making this size width.
• Also, SuperShafty Capra Knuckles will work with them, as well as Axial 10.3 and Capra Style portal knuckles from other manufactures.
• Drop in compatibility with stock and Stock Upgrade Knuckle parts.
• Ability to run Stock Plastic Knuckles
• Or Upgrade to SuperShafty CP43 Knuckles, these include Aluminum gear covers. (Less than 2oz)
• Brass SuperShafty CP44 Knuckles Optional, these include Aluminum gear covers. (5oz)
• Stock, or Stock Replacement Portal covers, will not fit our Knuckles.
• Custom Bolt on Panhard option with included 4th link mount.
• Custom Bolt on BAMS (Behind Axle Mounted Servo)

Warranty Info (click here)