Products

$69.99

"S4" SuperShafty Capra - Driveshaft Kit

This New kit is for the Axial Capra SUPERSHAFTY NEW "S4" high quality drive shaft kit that requ...

This New kit is for the Axial Capra SUPERSHAFTY NEW "S4" high quality drive shaft kit that requires no vehicle modification to install. Will work with a Stock Wheelbase. And small adjustments from stock.  FEATURES: Hardened High Strength Alloy used for high power electric systems. PHASE KEY Technology to keep your driveshafts in phase at all times. Drive Hubs to use M4 Threaded Cross Pins. (M4x12mm) Black Oxide - Laser Etched with SuperShafty name. No questions asked Warranty for ONE...

$11.99

1 Million Traxxas Differential Oil (1,000,000cst)

Thick 1 million weight differential oil has the consistency of light putty and is most often used...

Thick 1 million weight differential oil has the consistency of light putty and is most often used in center differentials. It may also be used to semi-lock front or rear differentials when equal power transfer to both wheels is desired. TRA5042 5042

$49.99

1.9 Beadlock Rings Super Shafty Falcons

Carbon Fiber Beadlock rings for the Super Shafty Falcon V1/V2 wheels 1.9 in size, These are the 1...

Carbon Fiber Beadlock rings for the Super Shafty Falcon V1/V2 wheels 1.9 in size, These are the 18 hole front and 6 hole rears. Note: THESE DO NOT COME WITH HARDWARE!! 3mm thick solid carbon fiber!

$49.99

1.9 Carbon Fiber Beadlock Rings Super Shafty Fa...

 Corrupt Carbon Works Carbon Fiber Beadlock rings for the Super Shafty Falcon V1/V2 wheels 1.9 in...

 Corrupt Carbon Works Carbon Fiber Beadlock rings for the Super Shafty Falcon V1/V2 wheels 1.9 in size, These are the 6 hole front and 6 hole rears. Note: THESE DO NOT COME WITH HARDWARE!! 3mm thick solid carbon fiber!

$61.99

1/10 1946 Dodge Power Wagon Clear Body 12.3" (3...

Features: Realistic 1946 Power Wagon Scale Crawler Body Separate Cab and Bed for Ultra-reali...

Features: Realistic 1946 Power Wagon Scale Crawler Body Separate Cab and Bed for Ultra-realism Menacing Front Grill and Large Fender Flares Separate Round Headlights Allow for LED's Made with Crystal Clear Polycarbonate Made in the USA, since 1982 In The Box 1946 Dodge Power Wagon Clear Body Cab & Bed (2 pcs) Screw (8) and Nut (8) Hardware Window Masks Decal Sheet Four steps to Crawl Ready: Clean Body and apply included window mask Paint then peel the over-spray film off S...

$73.99

1/10 1993 Ford Ranger Clear Body 12.3" (313mm) ...

Features Highly Detailed Replica of the 1993 Ford® Ranger! The Most Scale Body Pro-Line Has ...

Features Highly Detailed Replica of the 1993 Ford® Ranger! The Most Scale Body Pro-Line Has Ever Produced Highly Detailed Molded Front Grill, Side-view Mirrors, Taillight Buckets, and Door Handles Clear Head Light and Taillight Lenses That Allow for Real Working LED Lights (sold separately) Separate Cab and Bed for Ultra-realism Paint-then-peel Overspray Film Built-in Made with Crystal Clear Polycarbonate Made in the USA, since 1982 Specs Length: 20.5" (521mm) Width at Doors: ...

$71.99

1/10 2021 Ford Bronco Clear Body Set 11.4" Whee...

Fully licensed replica of the 2021 Ford Bronco The Most Scale Body Pro-Line Has Ever Produced Hi...

Fully licensed replica of the 2021 Ford Bronco The Most Scale Body Pro-Line Has Ever Produced Highly Detailed Molded Front Grill, Side-view Mirrors, Taillight Buckets, and Door Handles Made with Crystal Clear Polycarbonate Made in the USA, since 1982 PRO3569-00 3569-00 3569 In The Box (1) 2021 Ford Bronco 11.4" Wheelbase (2-door) Clear Body (2) Molded Black Plastic Scale Parts Trees (1) Hardware Pack (1) High-Quality Decals (1) Window Masks (1) Assembly Instruction Sheet (1) Paint-then-pee...

$39.99

1/10 Body Only: 65 Clod Buster Clodbuster

Specifications Scale 1/10

Specifications Scale 1/10

$23.99

1/10 Dual Stage 2.2" Rock Crawling Foam (2): XL...

eatures: Dual stage for incredible grip and sidewall support Contoured to perfectly match Pro-Li...

eatures: Dual stage for incredible grip and sidewall support Contoured to perfectly match Pro-Line’s 2.2” XL Tires Extremely Durable Closed Cell Foam Lightweight and Waterproof Inner Closed Cell for Unmatched Sidewall Support Soft Outer for Maximum Traction Improved Performance and Appearance Unique Pro-Line Blue and White Color Fits: Interco TSL SX Super Swamper XL 2.2” (PRO10107-14) Flat Iron XL 2.2” (PRO10115-14) BFGoodrich Baja T/A KR2 2.2” (PRO10119-14) Specifications:Height: 5.6...

$20.99

1/10 Dual Stage Front/Rear 1.9" Rock Crawling F...

Key Features Dual Stage for Incredible Grip and Sidewall Support Extremely Durable Closed Cell ...

Key Features Dual Stage for Incredible Grip and Sidewall Support Extremely Durable Closed Cell Foam Inner Closed Cell Provides unmatched Sidewall Support Soft Outer for Maximum Traction Improved Performance and Appearance

$299.99

1/10 Enduro Gatekeeper Builder's Kit

Product Details Key Features Behind-the-axle (BTA) steering Aluminum steering plates CMS (Chass...

Product Details Key Features Behind-the-axle (BTA) steering Aluminum steering plates CMS (Chassis Mounted Steering) Steel 25T servo horn Threaded aluminum shock bodies

$469.99

1/10 Midnight Edition Trail Finder 2 4WD with M...

Key Features Custom Designed for True-to-Scale Looks Realistic Billet Aluminum Ladder Frame Cha...

Key Features Custom Designed for True-to-Scale Looks Realistic Billet Aluminum Ladder Frame Chassis R3 Single Speed Aluminum Transmission Center Mounted Realistic 4x4 Transfer Case In The Box (1) RC4WD Trail Finder 2 RTR w/Mojave II Body Set (Midnight Edition) Needed to Complete It's ALL in the box! Everything you need is provided to get you on the trails today!

$69.99

1/10 PowerStroke XT Shocks, 5"

Key Features Huge 5 inch Length for eXtended Travel! True dual-stage spring rate Tune your spri...

Key Features Huge 5 inch Length for eXtended Travel! True dual-stage spring rate Tune your spring rates with the included optional springs Aluminum body and shock cap Infinite spring pre-load adjustment Rebuildable Beefy 3.5mm shock shafts Injection molded, super durable spring retainer and shock ends Bladder sealed shock cap Free flow molded pistons Dual O-ring seats and upper and lower shock shaft guides Pre-assembled just add oil!

$27.99

1/10 ProTrac F-11 Front/Rear 2.2"/3.0" 12mm SC ...

Product Details Key Features Tough 11-spoke wheel design Wheel made from high-strength, durable...

Product Details Key Features Tough 11-spoke wheel design Wheel made from high-strength, durable DuPont nylon material 3-piece wheel design for easy installation and no gluing of tires Six stainless steel button head screws included per wheel. Button Head Hardware size 2mm hex, 3mm threads, 10mm long Die Cast Bead-Loc ring

$49.99

1/10 RC Body Set Sand Scorcher 2010

NOTE: Completed body shown in photos is for illustrative purposes only. The body you will receive...

NOTE: Completed body shown in photos is for illustrative purposes only. The body you will receive is molded in white, unpainted and requires assembly.  Features: Includes body molded in white plastic, separately-molded parts for windows, driver, exhausts and side mirrors, and sticker sheet Can be used with Sand Scorcher (2010) chassis. It can also be fitted onto the Buggy Champ chassis if used in conjunction with Sand Scorcher (2010) front posts.

$479.99

1/10 RR10 Bomber 4WD Rock Racer RTR, Slawson

Features: Strong, composite plastic full tube chassis AR60 OCP-AXLE™ with offset pumpkin True 4...

Features: Strong, composite plastic full tube chassis AR60 OCP-AXLE™ with offset pumpkin True 4WD locked differentials Easy-access, forward mounted, adjustable battery tray Strong full ball bearing transmission with all-metal internal gears Durable 32-pitch spur gear for high-torque applications Aluminum King Shocks with precision-machined pistons  4-Link suspension BF Goodrich® Baja T/A KR3 tires  Officially licensed Trail Ready 2.2 bead lock wheels  Metal 23T Servo Horn Updated AX31354 He...

$499.99

1/10 SCX10 III Early Ford Bronco 4WD RTR, Turqu...

Key Features Officially licensed Early Ford Bronco body with realistic, molded tube cage, funct...

Key Features Officially licensed Early Ford Bronco body with realistic, molded tube cage, functional tube doors and many authentic scale details Front Dig function lets you lock the rear axle from the transmitter for the tighter turning radius of front wheel drive Replica 5.0L V8 engine, transmission housing and transfer case protect the motor while improving scale appearance Smart-enabled Spektrum™ receiver and ESC/receiver unit provides telemetry data to the DX3 transmitter Spektrum™ serv...

$16.99

1/10 Single Stage Closed Cell F/R 1.9" Crawling...

Product Details Key Features Contoured to perfectly match Pro-Line's 1.9" XL Tires Extremely Du...

Product Details Key Features Contoured to perfectly match Pro-Line's 1.9" XL Tires Extremely Durable Lightweight and Waterproof Provide unmatched Sidewall Support Deep Grooves for More Grip Improved Performance and Appearance Features Contoured to perfectly match Pro-Line's 1.9" XL Tires Extremely Durable Lightweight and Waterproof Provide unmatched Sidewall Support Deep Grooves for More Grip Improved Performance and Appearance Unique Pro-Line Blue Color Fits On Interco TSL SX Super Swa...

$468.80

1/14 Semi Truck Multi Function Unit

Overview The all-new RC Tractor Truck Multi-Function Control Unit provides incredible sound and a...

Overview The all-new RC Tractor Truck Multi-Function Control Unit provides incredible sound and action options for Tamiya's new Knight Hauler or any other 1/14-scale RC Tractor Truck. It offers 24 sounds that have been digitally recorded from a powerful full-scale truck. Not only does the Control Unit control sounds like air brakes, engine idling, coupler connection and more, it also works lights, turns power on and off, functions as a low-speed electronic speed control, vibrates and many mor...

$25.99

1/24 1978 Chevy K-10 Clear Body: SCX24

Features: Perfect fit for the Axial SCX24 Licensed Chevy K-10 Scale Looks Menacing Front Grill ...

Features: Perfect fit for the Axial SCX24 Licensed Chevy K-10 Scale Looks Menacing Front Grill and Iconic Squared-Off Fenders Paint-then-peel Overspray Film Included Made with Crystal Clear Polycarbonate Made in the USA, since 1982 Specifications: Scale: 1/24 Length: 8.25" (210 mm)Width: 3.5" (89 mm)Height: 2.6" (66 mm)Wheelbase: 5.25" (133 mm) Material: Polycarbonate Includes: (1) 1/24 Axial SCX24 1978 Chevy K10 Body (1) Window Masks (1) Decal Sheet

$26.99

1/24 Hyrax Front/Rear 1.0" Tires Mounted 7mm Bl...

Tire Features: Mini Version of the Extremely Successful Hyrax Tires Designed for Maximum Perform...

Tire Features: Mini Version of the Extremely Successful Hyrax Tires Designed for Maximum Performance on Any Terrain Highly Detailed Sidewall for Scale Looks Stepped Blocks & Multiple Sipes Create Unmatched Grip Foam Inserts Included Made from a Super Soft Compound   Wheel Features: Mini Version of the Extremely Popular Impulse Wheels True Bead-Loc Wheel Design held together by 3 Screws Blacked-Out Wheel Color 7mm hex to fit SCX24™ 3-piece Plastic Wheel Design fits 1.0" SCX24™ Tires Mol...

$134.99

1/24 SCX24 1967 Chevrolet C10 4WD Truck Brushed...

Features: Includes radio transmitter and receiver and battery Comes with ESC, motor, and Axial ...

Features: Includes radio transmitter and receiver and battery Comes with ESC, motor, and Axial AS-1 servo servo already installed Features a realistic body design. Licensed wheels are modeled after Method MR307 Hole Wheels Licensed tires are modeled after BFGoodrich Krawler™ T/A® KX tires 3-Link front and 4-link rear suspension provides optimal handling Full ball bearings Two bright LED lights included and mounted in the front bumper Specifications:  Approximate Assembly Time: No assembl...

$134.99

1/24 SCX24 2019 Jeep Wrangler JLU CRC 4WD Rock ...

Product Details Key Features 3-Link front and 4-link rear suspension provides optimal handling....

Product Details Key Features 3-Link front and 4-link rear suspension provides optimal handling. Two LED lights are included in the front bumper for night driving. Realistic steel frame rails add strength. True, full-time 4-wheel-drive. Comes with ESC, motor, and servo already installed. In The Box (1) 1/24 SCX24 2019 Jeep Wrangler JLU CRC 4WD Rock Crawler Brushed RTR (1) 4-Channel 2.4Ghz Surface Transmitter (1) ESC/Receiver (installed) (1) 88T Motor (installed) (1) AS-1 Micro Servo (insta...

$134.99

1/24 SCX24 2019 Jeep Wrangler JLU CRC 4WD Rock ...

Product Details Key Features 3-Link front and 4-link rear suspension provides optimal handling....

Product Details Key Features 3-Link front and 4-link rear suspension provides optimal handling. Two LED lights are included in the front bumper for night driving. Realistic steel frame rails add strength. True, full-time 4-wheel-drive. Comes with ESC, motor, and servo already installed. In The Box (1) 1/24 SCX24 2019 Jeep Wrangler JLU CRC 4WD Rock Crawler Brushed RTR (1) 4-Channel 2.4Ghz Surface Transmitter (1) ESC/Receiver (installed) (1) 88T Motor (installed) (1) AS-1 Micro Servo (insta...

$159.99

1/24 SCX24 2021 Ford Bronco 4WD Truck Brushed R...

In The Box (1) Axial® SCX24™ Ford Bronco 1/24 Scale 4WD RTR (1) Horizon Hobby® 2.4GHz 3-Channel...

In The Box (1) Axial® SCX24™ Ford Bronco 1/24 Scale 4WD RTR (1) Horizon Hobby® 2.4GHz 3-Channel Radio System (1) Axial® AS-1 Micro Servo (1) Horizon Hobby® ESC/Receiver Combo (1) Dynamite® USB LiPo Charger (1) Dynamite® 88T 030-Size Brushed Electric Motor With Pinion (1) Dynamite® 350mAh 2S 30C 7.4V LiPo Battery (4) AA Batteries for Transmitter (2) Decal Sheets (1) Product Manual Needed to Complete Nothing — everything is included in the box!

$149.99

1/24 SCX24 Jeep JT Gladiator 4WD Rock Crawler B...

Key Features Factory-assembled and ready-to-run, with 2-channel radio, 88T brushed motor, servo...

Key Features Factory-assembled and ready-to-run, with 2-channel radio, 88T brushed motor, servo, ESC/receiver unit and AA transmitter batteries Detailed Jeep® Gladiator body and interior complete with scale driver and Tuff Stuff Overland scale accessory pack mounted to the bed rack Officially licensed Nitto Trail Grappler M/T tires mounted on officially licensed KMC XD Machete wheels True full-time 4-wheel drive 22mm longer wheelbase for best body fit and ability to muscle over big challeng...

$149.99

1/24 SCX24 Jeep JT Gladiator 4WD Rock Crawler B...

Key Features Factory-assembled and ready-to-run, with 2-channel radio, 88T brushed motor, servo...

Key Features Factory-assembled and ready-to-run, with 2-channel radio, 88T brushed motor, servo, ESC/receiver unit and AA transmitter batteries Detailed Jeep® Gladiator body and interior complete with scale driver and Tuff Stuff Overland scale accessory pack mounted to the bed rack Officially licensed Nitto Trail Grappler M/T tires mounted on officially licensed KMC XD Machete wheels True full-time 4-wheel drive 22mm longer wheelbase for best body fit and ability to muscle over big challeng...

$169.99

1:18 CHEYENNE

Product Dimensions 12 x 4 x 5 inches Item Weight 2.93 pounds Item model number 11812 Man...

Product Dimensions 12 x 4 x 5 inches Item Weight 2.93 pounds Item model number 11812 Manufacturer recommended age 14 years and up Manufacturer Rochobby

$139.99

1:18 FIRE HORSE

Description Here comes the ROCHOBBY 1:18 Fire Horse! From vents on the vehicle body, detailed sc...

Description Here comes the ROCHOBBY 1:18 Fire Horse! From vents on the vehicle body, detailed scale interior and center console with seats, foot pedals, scale spare tire, cooling grille, air intake and many more scale touches all make the Fire Horse as detailed as a static-model. Incredible functional details like realistic pinion & ring gear axle and functioning indicators blend seemlessly. A feature-packed trail-proven chassis drives the Fire Horse. Aluminum rails provide a rigid platf...

$14.99

20 Million Traxxas X-Maxx Differential Oil (20,...

This is high viscosity differential oil from Traxxas. When servicing the Torque-blasting center d...

This is high viscosity differential oil from Traxxas. When servicing the Torque-blasting center drive unit on the X-Maxx, Traxxas recommends using this 20M weight oil.   TRA5040 5040

$7.50 $499.99 (15 variants)

2023 PLAYGROUND ENTRY FEE

Please do not purchase this online. This listing is only for reference purposes. These fees are p...

Please do not purchase this online. This listing is only for reference purposes. These fees are paid in person at the counter before entering the playground.

$0.00 $55.00 (9 variants)

2023 Spring Series - Key City Hobby Crawling Co...

1 Class - $25 2 Classes - $45 3 Classes - $55 Kids - Under 12 - $0.00 with paid adult.

1 Class - $25 2 Classes - $45 3 Classes - $55 Kids - Under 12 - $0.00 with paid adult.

$29.99

3BrothersRC 4.19" x 1.90" Anti-Foams 1-Pair Soft

These new Anti-Foams are a waterproof tire insert option that will re-define the way we tune our ...

These new Anti-Foams are a waterproof tire insert option that will re-define the way we tune our crawlers! Now you are able to run a very soft tire that still handles superbly on side hills. The inserts have a very high tensile strength so they will not tear, and are completely resistant to water as well as hot and cold temperatures. They are the same in below freezing temps as they are in 100 degree days. We will also be offering tuning rods, these rubberized rods are waterproof, and they ca...

$34.99

3BrothersRC 4.75" x 1.90" Anti-Foams 1-pair Dua...

These new Anti-Foams are a waterproof tire insert option that will re-define the way we tune our ...

These new Anti-Foams are a waterproof tire insert option that will re-define the way we tune our crawlers! Now you are able to run a very soft tire that still handles superbly on side hills. The inserts have a very high tensile strength so they will not tear, and are completely resistant to water as well as hot and cold temperatures. They are the same in below freezing temps as they are in 100 degree days. We will also be offering tuning rods, these rubberized rods are waterproof, and they ca...

$34.99

3BrothersRC 4.75" x 1.90" Anti-Foams 1-Pair Soft

These new Anti-Foams are a waterproof tire insert option that will re-define the way we tune our ...

These new Anti-Foams are a waterproof tire insert option that will re-define the way we tune our crawlers! Now you are able to run a very soft tire that still handles superbly on side hills. The inserts have a very high tensil strength so they will not tear, and are completely resistant to water as well as hot and cold temperatures. They are the same in below freezing temps as they are in 100degree days. We will also be offering tuning rods, these ruberized rods are waterproof, and they can b...

$37.99

3BrothersRC 4.90" x 1.90" Anti-foams 1-pair Dua...

These new 4.9" anti-foams fit perfectly with the Jconcepts ruptures or the Vanquish VXT2 tires. T...

These new 4.9" anti-foams fit perfectly with the Jconcepts ruptures or the Vanquish VXT2 tires. These new Anti-Foams are a waterproof tire insert option that will re-define the way we tune our crawlers! Now you are able to run a very soft tire that still handles superbly on side hills. The inserts have a very high tensile strength so they will not tear, and are completely resistant to water as well as hot and cold temperatures. They are the same in below freezing temps as they are in 100degre...

$4.99

3BrothersRC 4s DUAL No-Solder Servo And Accesso...

4s balance port to JST connector. Draw power for your servo, winch, lighting, or other accessorie...

4s balance port to JST connector. Draw power for your servo, winch, lighting, or other accessories directly from your battery, eliminating the need for a BEC. 125mm in length.  Note: Before connecting your servo or other accessory directly to the battery, make certain it can handle your battery voltage.  Note: No-solder connectors are ONLY for use with single-battery applications. DO NOT USE with multiple-battery setup.

$17.95

3BrothersRC Anti-Foams 4.75" x 1.90" Tuning Rou...

These tuning rounds go on the side of a anti-foam insert to fill the tire more. Great for wide ri...

These tuning rounds go on the side of a anti-foam insert to fill the tire more. Great for wide rims, wide tires, or for even better sidehilling.  ONLY works with 4.75" inserts. 4pcs per package which is enough for one truck adding one tuning round per tire.

$4.50

3BrothersRC Anti-Foams Tuning Rods Large (8mm, ...

These are silicone based 8mm tuning rods for the Anti-foam inserts. Each package has 32 pieces th...

These are silicone based 8mm tuning rods for the Anti-foam inserts. Each package has 32 pieces that are 34mm long. Weight is aproximately .05oz per piece. Please consider how many pieces you will need.

$4.50

3BrothersRC Anti-Foams Tuning Rods Small (6mm, ...

These are silicone based 6mm tuning rods for the Anti-foam inserts. Each package has 32 pieces th...

These are silicone based 6mm tuning rods for the Anti-foam inserts. Each package has 32 pieces that are 34mm long. Weight is aproximately .037oz per piece. Please consider how many pieces you will need.

$98.99

3BrothersRC Atlas Micro Pro servo winch

Introducing 3BrothersRC new competition winch. 4s capable! The Atlas Micro Pro servo winch has ev...

Introducing 3BrothersRC new competition winch. 4s capable! The Atlas Micro Pro servo winch has everything you need in a competition servo winch. The first direct-powered brushless micro winch. This is the strongest, and fastest micro winch you can buy. Every Atlas Micro Pro winch comes with 3BrothersRC high speed low profile custom spool with heavy duty 25 spline output shaft. These winches operate on any common voltage up to a max of 16.8 volts, or a full 4s lipo. Completely custom designed ...

$88.99

3BrothersRC BlackJacket 2000S 1/10 Scale Crawle...

The all new BlackJacket 2000s. This sensored outrunner is very small and packs a punch. Since it ...

The all new BlackJacket 2000s. This sensored outrunner is very small and packs a punch. Since it is sensored it doesn't cog like other outrunners. Has excellent power and braking for its size. It will also handle 2 speed 1/10 scale trucks on the trail with no problem. Plenty of power to wheelie your truck. This little guy only weights 88g(3oz) with wires and bullets. And it will fit anywhere at only 27.5mm long by 35mm diameter. 1 year warranty to original purchaser no matter what you do with...

$98.99

3BrothersRC G13 PRO Direct-Power Servo

Introducing the G13 PRO direct-powered brushless servo! In April 2018, 3BrothersRC released their...

Introducing the G13 PRO direct-powered brushless servo! In April 2018, 3BrothersRC released their first product — the G13 — a 672oz direct-powered brushless servo. Offering solid performance at a great price, the G13 helped put 3BrothersRC on the map. Today 3BrothersRC ise excited to continue delivering on both performance and value with the introduction of the G13 PRO — a direct-powered brushless servo that boasts 1000oz of torque for only $99! That’s right, the G13 PRO servo provides up to ...

$49.99

3BrothersRC SCX6 (2.9) Anti-Foams 1-pair Dual-S...

This is a two piece dual stage design that is strong enough to hold the mass of the scx6 while so...

This is a two piece dual stage design that is strong enough to hold the mass of the scx6 while soft enough for tire squat and to provide the ultimate traction while providing enough support for superb side hilling. We promise you will not be disappointed. All while being waterproof. So say goodbye to soggy foams.  Fits 2.9" rims and stock or hyrax g8 tires. The dual-stage Anti-Foams do not come with tuning rods. Must purchase separately if needed. Listing is for 1 pair.

$159.00

3BrothersRC SCX6 BlackJacket 1280kv 6s 14-Pole ...

The all new BlackJacket is is designed specifically for low speed control on large scale trucks p...

The all new BlackJacket is is designed specifically for low speed control on large scale trucks providing unmatched crawling torque. This 6s version is 1280kv but has much more crawling torque and control. On 6s it is almost twice as fast as the stock system but runs great on 3s and 4s also. This motor is a direct fit on the stock scx6 housing and will also work with the Vitavon motor housing. It has a 5mm pinion shaft so the stock pinion gear will fit also. This 6s version is almost 1 lb lig...

$179.00

3BrothersRC SCX6 BlackJacket 860kv 8s 14-pole S...

The all new BlackJacket is is designed specifically for low speed control on large scale trucks p...

The all new BlackJacket is is designed specifically for low speed control on large scale trucks providing unmatched crawling torque. This 8s version is 860kv but has  crawling a massive amount of torque. You need to be careful with the power of this motor. Setting the slipper clutch is the safe way to go. On 8s it is almost twice as fast as the stock system but runs great on and 4s also. This motor is a direct fit on the stock scx6 housing and will also work with the Vitavon motor housing. It...

$75.99

3BrothersRC YellowJacket 2100kv 4s Motor

This is the all new YellowJacket competition non-sensored brushless motor. Built from the ground ...

This is the all new YellowJacket competition non-sensored brushless motor. Built from the ground up the new YellowJacket produces more power with less size and weight. This super light motor is also more durable than the previous versions thanks to optimal flux gap for high torque density. It has a much better ability to change directions without stalling. So much more durable that 3BrothersRC is offering a lifetime warranty* on all the new YellowJackets! Used mainly in lightweight comp rigs,...

$4.99

3S XH Balance Plug to 2 Pin JST Male Adapter (2...

3S XH Balance Plug to 2 Pin JST Male Adapter (2pcs)

3S XH Balance Plug to 2 Pin JST Male Adapter (2pcs)

$5.99 $19.99 (3 variants)

4mm M4 Nylock Flanged Wheel lock nuts

Need replacement hardware for your RC Truck wheel nuts? The Nylock will stop holding after so man...

Need replacement hardware for your RC Truck wheel nuts? The Nylock will stop holding after so many times you take them on and off. We've got you covered. Grab a few new ones to hold those wheels tight. This Hardware is M4 - 4mm size. Used on Most axle nuts This is KNK Hardware. and uses a 7mm Driver.  Options offered for sale here: Replacement HW Pack Size 1 (12 Nuts) Replacement HW Pack Size 2 (24 Nuts) Replacement HW Pack Size 3 (48 Nuts)    

$12.88

66T HT Motor with 11T Gear: SCX24

NOTE: Requires Hot Racing Motor Mount (HRASXTF18SS) and modification battery mount post to allow ...

NOTE: Requires Hot Racing Motor Mount (HRASXTF18SS) and modification battery mount post to allow the use of this longer motor, or relocation of your battery depending on set up.Features: High Torque Magnet and Rotor Tuned for Rock Climbing Larger 050 size can Specifications:Brass Pinion Gear: 64P 11TRated Voltage: 7.4 VTotal length: 1.12in / 28.5mmOutput Shaft length: 0.20in / 5.1mmOutput Shaft OD: 0.06in / 1.5mmWeight: 0.67oz / 19gIncludes: (1) 050 HT 66T motor with 11T brass gear with wi...