Gears

$28.99 $28.99 (3 variants)

TGH Portal Axle Gear Set - OVERDRIVE & STANDARD...

Team Garage Hack Portal Axle Gear Set. 3 different ratios available.   Wild OVERDRIVE - 20/15 (36...

Team Garage Hack Portal Axle Gear Set. 3 different ratios available.   Wild OVERDRIVE - 20/15 (36% Overdrive) Available - NOW !!!! Perfect for your Capra Portals Also fits SCX10.3 (SCX10iii) AR45 Portals - But we recommend the Mild set for that (Below)   NEW - Mild OVERDRIVE - 21/14 (24% Overdrive) Available - NOW !!!! Perfect for your SCX10.3 (SCX10iii) AR45 Portals Also fits Capra Portals - But we recommend the Wild set for that (Above)   Standard Drive - (Stock Replacement) 23/12 (0% O...

$38.99

VP Vanquish Bevel Gear Set - 30T / 8T - Axial S...

Fully machined hardened ring and pinion gear set  Laser etched Vanquish logo and tooth count Inc...

Fully machined hardened ring and pinion gear set  Laser etched Vanquish logo and tooth count Includes grade 12.9 M2 hardware for attaching to axle spool One gear set required per axle Compatible with factory Axial AR44 axle as well as Vanquish Products Currie housings

$33.99

HD Bevel Gear Set - 27T / 8T - Overdrive Axial ...

HD Bevel Gear Set - 27T / 8T - Overdrive - Axial SCX10.2 NOW ALL GEARS in stock are MACHINED with...

HD Bevel Gear Set - 27T / 8T - Overdrive - Axial SCX10.2 NOW ALL GEARS in stock are MACHINED with 6 Bolt holes. Fits Axial and VP 6 bolt Locker, as well as previous 3 bolt versions. AR44 Size Optional Overdrive Ratio Gear Sets. • Use these Hot Racing gears in different combinations with the Stock Ratio, front and rear to reduce torque twist in the rear and overdrive the front axle to help pull you through climbs easier• The heavy duty gear set offers improved gear mesh reducing slop in the d...

$39.99

Vanquish AR44 Axle UD Gear Set

Vanquish AR44 Axle Underdrive Gear Set. Features: 33/8T ring and pinion underdrive gear set Reco...

Vanquish AR44 Axle Underdrive Gear Set. Features: 33/8T ring and pinion underdrive gear set Recommended for use in Rear axle to achieve overdrive to the front Reduces torque twist in the rear axle by increasing the reduction  9.5% Increase in reduction from stock 30/8 gearset Fully machined hardened ring and pinion gear set  Laser etched Vanquish logo and tooth count Includes grade 12.9 M2 hardware for attaching to axle spool One gear set required per axle Compatible with factory Axial AR44,...

$5.49

Robinson Racing Absolute 32P Hardened Pinion Ge...

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited fo...

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited for use with Robinson steel spur gears. They feature an 1/8 inch bore, a 32 pitch tooth profile, with the tooth number stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one gear and one 5-40 set screw. 

$5.49

Robinson Racing Absolute 32P Hardened Pinion Ge...

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited fo...

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited for use with Robinson steel spur gears. They feature an 1/8 inch bore, a 32 pitch tooth profile, with the tooth number stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one gear and one 5-40 set screw.

$9.99

Losi Tenacity Differential Gear Set w/Hardware

This is a replacement Losi Tenacity SCT Diff Gear Set with included Hardware. 

This is a replacement Losi Tenacity SCT Diff Gear Set with included Hardware. 

$16.99

Differential Gears Housing RBX10

Axial RBX10 Ryft Differential Gears & Housing. Package includes replacement internal differen...

Axial RBX10 Ryft Differential Gears & Housing. Package includes replacement internal differential gears, cross pins, housing and gasket that can be used in the front, center or rear position. Ring gear, o-rings and shims not included.

$36.99

Gens Ace Bashing Series 5200mAh 7.4V 2S1P 35C C...

Features: - Long cycle life with 150 times minimum, up to 200Wh/kg energy density.- Production in...

Features: - Long cycle life with 150 times minimum, up to 200Wh/kg energy density.- Production in the most strict single cell capacity, voltage, resistance, discharge curve matching process.Superior Japan and Korea Lithium Polymer raw materials.- Local after-sales service(located in Dublin, CA) Specifications: - Minimum Capacity: 5200mAh- Configuration: 2S1P / 7.4V / 2Cells- Discharge Rate: 35C- Max Burst Discharge Rate: 70C- Net Weight(¡À20g): 273g- Dimensions: 138mm Length x 46mm Width x 25...

$5.49

Robinson Racing Absolute 32P Hardened Pinion Ge...

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited fo...

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited for use with Robinson steel spur gears. They feature an 1/8 inch bore, a 32 pitch tooth profile, with the tooth number stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one gear and one 5-40 set screw

$12.49

Robinson Racing Extra Hard Steel 32P Pinion Gea...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipp...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipper units 5mm Bore Fits 5mm motor shaft Available in multiple tooth count options, use the pull down menu above to pick the size you need  NOTE: RRP1200 5 m/m to 1/8 inch Reducer Sleeve required for 1/8 inch shaft motors. 32 pitch and .8 module gears can be used together with no adverse affects such as increased noise or increased wear. The difference is that .8 module gears have a slightly lar...

$12.49

Robinson Racing Extra Hard Steel .8 Mod Pinion ...

Robinson Racing Extra Hard Steel 5mm Bore .8 Mod Pinion Gears fit brushless motors with a 5mm sha...

Robinson Racing Extra Hard Steel 5mm Bore .8 Mod Pinion Gears fit brushless motors with a 5mm shaft and are intended for use with the Traxxas E-Maxx model #3905. These will also work with standard size brushless motors when used with the RRP1200 reducer sleeve, making them an excellent choice for the Traxxas Slash 4x4.

$12.49

Robinson Racing Extra Hard Steel .8 Mod Pinion ...

Robinson Racing Extra Hard Steel 5mm Bore .8 Mod Pinion Gears fit brushless motors with a 5mm sha...

Robinson Racing Extra Hard Steel 5mm Bore .8 Mod Pinion Gears fit brushless motors with a 5mm shaft and are intended for use with the Traxxas E-Maxx model #3905. These will also work with standard size brushless motors when used with the RRP1200 reducer sleeve, making them an excellent choice for the Traxxas Slash 4x4.

$12.49

Robinson Racing Extra Hard Steel .8 Mod Pinion ...

Robinson Racing Extra Hard Steel 5mm Bore .8 Mod Pinion Gears fit brushless motors with a 5mm sha...

Robinson Racing Extra Hard Steel 5mm Bore .8 Mod Pinion Gears fit brushless motors with a 5mm shaft and are intended for use with the Traxxas E-Maxx model #3905. These will also work with standard size brushless motors when used with the RRP1200 reducer sleeve, making them an excellent choice for the Traxxas Slash 4x4.

$11.99

Steel Spur Gear (45T)

Steel Spur Gear (45T)(32P/0.8Mod)

Steel Spur Gear (45T)(32P/0.8Mod)

$26.99

CNC Steel Gear Set for Gen8 Transmission and Tr...

CNC Steel Gear Set for Gen8 - (Total 4 Gears) Metal transfer case gear (25T), Metal transmission ...

CNC Steel Gear Set for Gen8 - (Total 4 Gears) Metal transfer case gear (25T), Metal transmission gear (20T), Metal Transmission / Transfer case input gear (13T Qty2)

$5.99

Portal Axle Output Gear (17T 2pcs)

Redcat Scout II Gen8 Portal Axle Output Gear. These are the replacement lower portal box gears us...

Redcat Scout II Gen8 Portal Axle Output Gear. These are the replacement lower portal box gears used in the Redcat portal axle. Package includes two 17 tooth gears.

$17.99

Steel transmission gear set (20T, 28T, 53T) and...

Steel transmission gear set (20T, 28T, 53T) and pin (1set) Compatible with Everest Gen7 & Eve...

Steel transmission gear set (20T, 28T, 53T) and pin (1set) Compatible with Everest Gen7 & Everest 10

$31.99

SCX10 TRANSMISSION GEAR SET

Machined Hardened Steel Transmission gears for use in Axial 3-Gear style locked transmissions. M...

Machined Hardened Steel Transmission gears for use in Axial 3-Gear style locked transmissions. Machined from steel and heat treated for durability Added clearance machined for standard M2 screws to be used on the final gear Grade 12.9 Steel M2 Hardware included for final gear Increased ID on idler gear allows for use of 5x11x4 bearings to be used (also included) Final gear is machined for additional weight reduction   Compatible with SCX10, Wraith, AX-10, AX-10 Deadbolt, SMT10, and SCX10-II...

$38.99

INCISION AR14B RBX10 RYFT 38/13 GEAR SET

Incision Gear Set for Axial AR14B Axles used in the RBX10 Ryft Feature an included larger bearin...

Incision Gear Set for Axial AR14B Axles used in the RBX10 Ryft Feature an included larger bearing on the inner side of the pinion for greater load handling.  Works with stock axle housings* or Vanquish Products axle housings Hardened Machined gear construction improves durability over stock Compatible with stock differential housing or Vanquish AR14B spools  

$38.99

INCISION AR14B RBX10 RYFT 43/13 GEAR SET

Incision Gear Set for Axial AR14B Axles used in the RBX10 Ryft 43/13 gear ratio allows for tunin...

Incision Gear Set for Axial AR14B Axles used in the RBX10 Ryft 43/13 gear ratio allows for tuning overall gear ratio or creating underdrive when installed only in rear axle  Feature an included larger bearing on the inner side of the pinion for greater load handling.  Works with stock axle housings* or Vanquish Products axle housings Hardened machined gear construction improves durability over stock Compatible with stock differential housing or Vanquish AR14B spools  

$4.69

48 Pitch Pinion Gear, 19T

The 48 Pitch Hard Nickel Plated Alloy Steel Pinions are precision cut gears that last and last wh...

The 48 Pitch Hard Nickel Plated Alloy Steel Pinions are precision cut gears that last and last when used with a plastic spur gear. Pinions are stamped with tooth number. 1/8 inch bore. One 5-40 set screw included. 1/16 inch allen wrench (not included) fits the 5/40 set screw.

$12.50

Extra Hard 23 Tooth Blackened Steel 32p Pinion,...

Extra hard high carbon motor pinions are built to last with our hi-performance GEN3 steel slippe...

Extra hard high carbon motor pinions are built to last with our hi-performance GEN3 steel slipper units. Made from high carbon steel and then heat treated to increase the hardness of the surface even more. High carbon steel is naturally higher in lubricity and lower in adhesion than milder grades of steel making these gears ideal for use with metal spur gears. All pinions precision machined and stamped with the number of teeth. One 4mm set screw included. 2mm allen wrench (NOT INCLUDED) fits...

$12.49

Robinson Racing Extra Hard Steel 32P Pinion Gea...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipp...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipper units 5mm Bore Fits 5mm motor shaft Available in multiple tooth count options, use the pull down menu above to pick the size you need  NOTE: RRP1200 5 m/m to 1/8 inch Reducer Sleeve required for 1/8 inch shaft motors. 32 pitch and .8 module gears can be used together with no adverse affects such as increased noise or increased wear. The difference is that .8 module gears have a slightly lar...

$27.99

Axial Heavy Duty Bevel Gear Set (38/13)

Features: Use Axial Heavy Duty Bevel Gears in different combinations front and rear. Use 36/14...

Features: Use Axial Heavy Duty Bevel Gears in different combinations front and rear. Use 36/14 Front ~ 43/13 Rear -or- 38/13 Front ~ 43/13 - Rear to reduce torque twist in the rear and overdrive the front axle to help pull you through climbs easier. Use the same bevel gear set in the front and rear to raise or lower your gear ratio. The heavy duty gear set offers improved gear mesh reducing slop in the drive train. Spiral cut gears offer increased gear tooth contact and run quieter. The ...

$29.99

Axial Heavy Duty "Underdrive" Bevel Gear Set (4...

Features: Use Axial Heavy Duty Bevel Gears in different combinations front and rear. Use 36/14...

Features: Use Axial Heavy Duty Bevel Gears in different combinations front and rear. Use 36/14 Front ~ 43/13 Rear -or- 38/13 Front ~ 43/13 - Rear to reduce torque twist in the rear and overdrive the front axle to help pull you through climbs easier. Use the same bevel gear set in the front and rear to raise or lower your gear ratio. The heavy duty gear set offers improved gear mesh reducing slop in the drive train. Spiral cut gears offer increased gear tooth contact and run quieter. Gear...

$6.99

Axial Gear Set

This is a replacement gear set from Axial. Includes the idler gear, and the output gear for the t...

This is a replacement gear set from Axial. Includes the idler gear, and the output gear for the transmission.

$23.99

Hot Racing HD Spiral Bevel Underdrive Gear Set ...

Features: Precision machined helical spiral cut gears offer inherently greater strength and smoo...

Features: Precision machined helical spiral cut gears offer inherently greater strength and smooth operation than the factory bevel cut gears High carbon steel construction Stronger than the stock bevel-cut zinc cast gears 43T/13T provides 13% gear reduction (vs stock 38T/13T) to increase available torque to ground Requires: Installation following kit manual One M3x2.5x11mm (Axial AXIA0175 or Hot Racing HRASSP311) or M3x2.5x12mm (Axial AXIA176) screw shaft for driveshaft attachment Do not ...

$23.99

Hot Racing HD Spiral Cut Bevel Gear Set (36T/14...

Features: Precision machined helical spiral cut gears offer inherently greater strength and smoo...

Features: Precision machined helical spiral cut gears offer inherently greater strength and smooth operation than the factory bevel cut gears High carbon steel construction Stronger than the stock bevel-cut zinc cast gears 36T/14T provides 12% overdrive (vs stock 38T/13T) increases the wheel speed and is commonly used in the front end for digs Works on front or rear. Use cases are typically front and rear at the same time, or front only to increase front digs Requires: Installation followi...

$23.99

Hot Racing HD Spiral Bevel Underdrive Gear Set ...

Features: Precision machined helical spiral cut gears offer inherently greater strength and smoo...

Features: Precision machined helical spiral cut gears offer inherently greater strength and smooth operation than the factory bevel cut gears High carbon steel construction Stronger than the stock bevel-cut zinc cast gears 43T/13T provides 13% gear reduction (vs stock 38T/13T) to increase available torque to ground Requires: Installation following kit manual One M3x2.5x11mm (Axial AXIA0175 or Hot Racing HRASSP311) or M3x2.5x12mm (Axial AXIA176) screw shaft for driveshaft attachment Do not ...

$13.99

Robinson Racing SCX10/SMT10 X-Hard 48P Top Shaf...

The Robinson Racing SCX10/SMT10 X-Hard 48P Top Shaft Input Gear is an optional upgrade for the st...

The Robinson Racing SCX10/SMT10 X-Hard 48P Top Shaft Input Gear is an optional upgrade for the stock AXI30394 top shaft gear that is included with the AX10, SCX10, SCX10 II RTR 3 gear transmission, Wraith and SMT10 models. This hardened steel input gear is much stronger than the stock gear and is a great option for high power applications.

$14.75

Robinson Racing Hardened Steel Idler Gear

This is an optional Robinson Racing Hardened Steel Idler Gear, and is intended for use with the A...

This is an optional Robinson Racing Hardened Steel Idler Gear, and is intended for use with the Axial Wraith. This gear has been precision machined and hardened for the ultimate in reliability and performance. 

$12.49

Robinson Racing Extra Hard Steel .8 Mod Pinion ...

Robinson Racing Extra Hard Steel 5mm Bore .8 Mod Pinion Gears fit brushless motors with a 5mm sha...

Robinson Racing Extra Hard Steel 5mm Bore .8 Mod Pinion Gears fit brushless motors with a 5mm shaft and are intended for use with the Traxxas E-Maxx model #3905. These will also work with standard size brushless motors when used with the RRP1200 reducer sleeve, making them an excellent choice for the Traxxas Slash 4x4.

$12.49

Robinson Racing Extra Hard Steel .8 Mod Pinion ...

Robinson Racing Extra Hard Steel 5mm Bore .8 Mod Pinion Gears fit brushless motors with a 5mm sha...

Robinson Racing Extra Hard Steel 5mm Bore .8 Mod Pinion Gears fit brushless motors with a 5mm shaft and are intended for use with the Traxxas E-Maxx model #3905. These will also work with standard size brushless motors when used with the RRP1200 reducer sleeve, making them an excellent choice for the Traxxas Slash 4x4.

$38.99

Robinson Racing Heavy Duty Comp Hard Output Gea...

The Robinson Racing Heavy Duty Comp Hard Output Gear is a heavy duty steel upgrade compatible wit...

The Robinson Racing Heavy Duty Comp Hard Output Gear is a heavy duty steel upgrade compatible with any truck using the AX10 style transmission, such as the SCX10 and SCX10 II RTR. This gear features a two piece design, that includes an extra hard 5mm diameter shaft that can be replaced if needed. 

$42.49

Robinson Racing Gen3 Slipper Kit (Slash 4x4) (54T)

This is an optional Robinson Racing Gen3 Slipper Kit, and is intended for use with the Traxxas Sl...

This is an optional Robinson Racing Gen3 Slipper Kit, and is intended for use with the Traxxas Slash 4x4. Robinson Racing GEN3 Slipper Units are over-engineered to meet the punishing demands of the most powerful brushless motor systems! The new GEN3 Slipper Unit is a captured design to prevent slipper pad blowout and deliver maximum power to the ground. The hi-performance hardened steel spur gear will not fail or strip. Strong and tough 0.8 module/32-pitch teeth handle all the power you can p...

$15.99

Tattu R-Line 650mAh 14.8V 95C 4S1P Lipo Battery...

Features: - Remarkable stacking technology enables single-cell capacities of 650mAh.- High discha...

Features: - Remarkable stacking technology enables single-cell capacities of 650mAh.- High discharge performance and high energy density.- Superior Japan and Korea Lithium Polymer raw materials.- Local after-sales service(located in Dublin, CA) Specifications: - Minimum Capacity: 650mAh- Configuration: 4S1P / 14.8V / 4Cells- Discharge Rate: 95C- Max Burst discharge Rate: 190C- Net Weight(±20g): 82g- Dimensions: 61mm Length x 31mm Width x 25mm Height- Charge Plug: JST-XHR-5P- Discharge Plug: XT30

$8.59

Robinson Racing 48P Machined Pinion Gear (5mm B...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pi...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pitch spur, when using a motor that has a 5mm rotor shaft. Robinson Racing pinions are precision machined from high quality steel for durability, and have the number of teeth stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one pinion gear and one 4mm set screw.

$8.59

Robinson Racing 48P Machined Pinion Gear (5mm B...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pi...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pitch spur, when using a motor that has a 5mm rotor shaft. Robinson Racing pinions are precision machined from high quality steel for durability, and have the number of teeth stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one pinion gear and one 4mm set screw.

$8.59

Robinson Racing 48P Machined Pinion Gear (5mm B...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pi...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pitch spur, when using a motor that has a 5mm rotor shaft. Robinson Racing pinions are precision machined from high quality steel for durability, and have the number of teeth stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one pinion gear and one 4mm set screw.

$8.59

Robinson Racing 48P Machined Pinion Gear (5mm B...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pi...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pitch spur, when using a motor that has a 5mm rotor shaft. Robinson Racing pinions are precision machined from high quality steel for durability, and have the number of teeth stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one pinion gear and one 4mm set screw.

$8.59

Robinson Racing 48P Machined Pinion Gear (5mm B...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pi...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pitch spur, when using a motor that has a 5mm rotor shaft. Robinson Racing pinions are precision machined from high quality steel for durability, and have the number of teeth stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one pinion gear and one 4mm set screw.

$8.59

Robinson Racing 48P Machined Pinion Gear (5mm B...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pi...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pitch spur, when using a motor that has a 5mm rotor shaft. Robinson Racing pinions are precision machined from high quality steel for durability, and have the number of teeth stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one pinion gear and one 4mm set screw.

$8.59

Robinson Racing 48P Machined Pinion Gear (5mm B...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pi...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pitch spur, when using a motor that has a 5mm rotor shaft. Robinson Racing pinions are precision machined from high quality steel for durability, and have the number of teeth stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one pinion gear and one 4mm set screw

$8.59

Robinson Racing 48P Machined Pinion Gear (5mm B...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pi...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pitch spur, when using a motor that has a 5mm rotor shaft. Robinson Racing pinions are precision machined from high quality steel for durability, and have the number of teeth stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one pinion gear and one 4mm set screw.

$8.59

Robinson Racing 48P Machined Pinion Gear (5mm B...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pi...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pitch spur, when using a motor that has a 5mm rotor shaft. Robinson Racing pinions are precision machined from high quality steel for durability, and have the number of teeth stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one pinion gear and one 4mm set screw.

$8.59

Robinson Racing 48P Machined Pinion Gear (5mm B...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pi...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pitch spur, when using a motor that has a 5mm rotor shaft. Robinson Racing pinions are precision machined from high quality steel for durability, and have the number of teeth stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one pinion gear and one 4mm set screw.

$8.59

Robinson Racing 48P Machined Pinion Gear (5mm B...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pi...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pitch spur, when using a motor that has a 5mm rotor shaft. Robinson Racing pinions are precision machined from high quality steel for durability, and have the number of teeth stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one pinion gear and one 4mm set screw.

$8.59

Robinson Racing 48P Machined Pinion Gear (5mm B...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pi...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pitch spur, when using a motor that has a 5mm rotor shaft. Robinson Racing pinions are precision machined from high quality steel for durability, and have the number of teeth stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one pinion gear and one 4mm set screw.

$8.59

Robinson Racing 48P Machined Pinion Gear (5mm B...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pi...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pitch spur, when using a motor that has a 5mm rotor shaft. Robinson Racing pinions are precision machined from high quality steel for durability, and have the number of teeth stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one pinion gear and one 4mm set screw