Gears

$4.99

Robinson Racing 32P Pinion Gear (9T)

Robinson Racing 32 Pitch Pinion Gears features an 1/8 inch bore. These gears are not heat treated...

Robinson Racing 32 Pitch Pinion Gears features an 1/8 inch bore. These gears are not heat treated and should only be used with plastic spur gears. If you only run plastic spur gears these pinions are the perfect choice. One 5-40 set screw included and the pinion is not marked with tooth number. Choose from multiple options to fine tune the gear ratio of your vehicle.

$6.99

Kimbrough 84 Tooth 48P Precision Spur Gear #147

Kimbrough 84 Tooth 48P Precision Spur Gear

Kimbrough 84 Tooth 48P Precision Spur Gear

$6.99

Kimbrough 87 Tooth 48P Precision Spur Gear #148

Kimbrough 87 Tooth 48P Precision Spur Gear

Kimbrough 87 Tooth 48P Precision Spur Gear

$5.99

Robinson Racing Steel 48P Pinion Gear (3.17mm B...

These Robinson Racing Products 48 Pitch Pinion Gears are precision cut alloy steel gears that fea...

These Robinson Racing Products 48 Pitch Pinion Gears are precision cut alloy steel gears that feature a hard nickel coating for durability. The pinions have an 1/8" bore, are stamped with the tooth number for easy identification and include one 5-40 set screw. These gears are available in a variety of tooth count options to fine tune the torque and top speed of your vehicle.

$5.99

Robinson Racing Super Hard "Absolute" 48P Steel...

Premium Heat Treated "ABSOLUTE" Steel Pinion Gears Super hard, heat treated, "Absolute" pinion ge...

Premium Heat Treated "ABSOLUTE" Steel Pinion Gears Super hard, heat treated, "Absolute" pinion gears are a must for using with steel spur gears, and will last and last if used with plastic spur gears. Available in sizes 9 through 28 teeth. All pinions stamped with tooth number. 3.17mm (1/8") bore. One 5-40 set screw included.

$5.99

Robinson Racing Super Hard "Absolute" 48P Steel...

Premium Heat Treated "ABSOLUTE" Steel Pinion Gears Super hard, heat treated, "Absolute" pinion ge...

Premium Heat Treated "ABSOLUTE" Steel Pinion Gears Super hard, heat treated, "Absolute" pinion gears are a must for using with steel spur gears, and will last and last if used with plastic spur gears. Available in sizes 9 through 28 teeth. All pinions stamped with tooth number. 3.17mm (1/8") bore. One 5-40 set screw included.

$51.99

VANQUISH VFD 21% OVERDRIVE TRANSFER CASE GEAR SET

Features: Provides a 21% Overdrive Overdrive is defined as the percentage difference between th...

Features: Provides a 21% Overdrive Overdrive is defined as the percentage difference between the gear ratio at the front wheels vs the ratio at the rear wheels Overdrive aids in steering  Option part for the VPS10152 VFD Transmission Kit

$16.99

Differential Gears Housing RBX10

Axial RBX10 Ryft Differential Gears & Housing. Package includes replacement internal differen...

Axial RBX10 Ryft Differential Gears & Housing. Package includes replacement internal differential gears, cross pins, housing and gasket that can be used in the front, center or rear position. Ring gear, o-rings and shims not included.

$8.59

Robinson Racing 48P Machined Pinion Gear (5mm B...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pi...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pitch spur, when using a motor that has a 5mm rotor shaft. Robinson Racing pinions are precision machined from high quality steel for durability, and have the number of teeth stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one pinion gear and one 4mm set screw.

$11.99

Losi Tenacity Differential Gear Set w/Hardware

This is a replacement Losi Tenacity SCT Diff Gear Set with included Hardware. 

This is a replacement Losi Tenacity SCT Diff Gear Set with included Hardware. 

$23.99

Hot Racing Steel Transfer Case (T-Case) Gear Se...

Hot Racing steel transfer case (T-case) gear set for the 1/10th scale Axial Yeti and RR10 Bomber ...

Hot Racing steel transfer case (T-case) gear set for the 1/10th scale Axial Yeti and RR10 Bomber kit and RTR vehicles FEATURES: - CNC machined hardened #45 steel- Replaces stock powder metal gears- Black oxide coating for durability and corrosion resistance YOU WILL RECEIVE: - One (1) 15T, 32P input gear- One (1) 15T, 32P idler gear with integrated shaft- One (1) 27T, 32P output gear SPECIFICATIONS: - Pitch: 32 pitch (0.8 mod) REQUIREMENTS: - Light application of gear lubricant CO...

$39.99

Traxxas TRX-4 Machined Underdrive Ring & Pinion...

Heavy-duty differential ring and pinion gears are machined from high-quality steel for unsurpasse...

Heavy-duty differential ring and pinion gears are machined from high-quality steel for unsurpassed strength and durability. Available in standard, underdrive and overdrive configurations, they allow you to tune your TRX-4® for greater climbing agility. Accessory part for these models: TRX-4® 1972 Chevrolet® Blazer® High Trail Edition™ TRX-4® 1979 Chevrolet® Blazer® TRX-4® 1979 Ford® Bronco® TRX-4® Chevrolet® K10 High Trail Edition™ TRX-4® Equipped with Traxx® TRX-4® Ford® Bronco® TRX-4® For...

$7.99

Redcat Rear Portal Axle Input Gear (8T) (2 pcs)

Redcat Rear Portal Axle Input Gear (8T) (2 pcs)

Redcat Rear Portal Axle Input Gear (8T) (2 pcs)

$4.99

Robinson Racing 48P Premium "Pro" Black Aluminu...

The "Pro" Pinions are precision machined from 7075 grade aluminum and anodized with a super hard ...

The "Pro" Pinions are precision machined from 7075 grade aluminum and anodized with a super hard jet black finish that not just hardends the surface but also protects the gear from corrosion and increases the lubricity by reducing friction and adhesion between the pinion gear and spur gear. Recommended for onroad, but they can be run off road. A wide selection of tooth sizes are available. Tooth number stamped on each pinion. 1/8 inch (3.17mm) bore. One 5-40 set screw included.

$41.99

Axial 6-Bolt 27/8 Overdrive Gear Set

6-Bolt 27 8 Overdrive Gear Set Overview Provides 12% overdrive Features Hardened Steel Cons...

6-Bolt 27 8 Overdrive Gear Set Overview Provides 12% overdrive Features Hardened Steel Construction Fits the Axial Capra F9 Axle and SCX10-III vehicles with AR45P Portal Axles Can also be used in all Axial SCX10-II AR44 based vehicles w/ the purchase of the          AR44 6-Bolt Differential Locker   Product Specifications Part Type Gears

$22.99

Hot Racing Steel Super Duty 32P 59T Spur Gear

Hot Racing steel super duty 32 pitch, 59 tooth rock racer spur gear for 1/10th scale Axial electr...

Hot Racing steel super duty 32 pitch, 59 tooth rock racer spur gear for 1/10th scale Axial electric Wraith, AX10, and SCX series trucks   FEATURES: -Rugged 32 pitch (0.8 module) teeth for total reliability when using high power brushless systems-CNC machined light weight hardened steel construction-Black oxide coating for durability and corrosion resistance-Replaces stock nylon spur gear-Must use with 32 pitch (0.8 module) pinion gear, stock is 48 pitch   YOU WILL RECEIVE: -59 tooth 32 pitch ...

$19.99

Team Garage Hack Axial Standard Portal Gears: U...

CNC Machined Case Hardened 1045 Steel (1) Set of portal box gears includes: (2) Input gears ...

CNC Machined Case Hardened 1045 Steel (1) Set of portal box gears includes: (2) Input gears (2) Output gears (1) Set required per axle Standard Ratio 1.73:1 (2) 15T 48P  (2) 26T 48P WILL NOT FIT AXIAL 1/10 CAPRA

$34.99

VITAVON HD 45# 52T Spur Gear for Axial SCX6 Jee...

Non-Domestic Product: New: A brand-new, unused, unopened, undamaged item (including handmad...

Non-Domestic Product: New: A brand-new, unused, unopened, undamaged item (including handmade items). See the seller’s Non-Domestic Product: No Custom Bundle: No Color: Black MPN Does Not Apply Bundle Listing: No Modified Item: No Brand:  VITAVON Type: 52T Spur Gear Compatible Vehicle Type: Buggy, Crawler, Drift Car, Scale, Short Course Truck Compatible Fuel Type: Electric Country/Region of Manufacture: China Compatible Scale: 1:6 UPC: Does not apply...

$12.99

Robinson Racing Extra Hard Steel Mod1 Pinion Ge...

Robinson Racing Extra Hard Steel 5mm Bore Mod1 Pinion gears were developed for 1/8 scale applica...

Robinson Racing Extra Hard Steel 5mm Bore Mod1 Pinion gears were developed for 1/8 scale applications and fit most 1/8 scale nitro spur gears perfectly. They are available in a variety of tooth count options to fine tune the torque and top speed of your model. Package includes one pinion gear and one 4x4mm set screw.

$16.99

Robinson Racing Universal Fit Idler Gear

This is the Robinson Racing Universal Axial Extra Hard Idler Gear. **Not Compatible with the Axi...

This is the Robinson Racing Universal Axial Extra Hard Idler Gear. **Not Compatible with the Axial Yeti or Yeti XL.**

$8.59

Robinson Racing 48P Machined Pinion Gear (5mm B...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pi...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pitch spur, when using a motor that has a 5mm rotor shaft. Robinson Racing pinions are precision machined from high quality steel for durability, and have the number of teeth stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one pinion gear and one 4mm set screw.

$5.99

Robinson Racing Super Hard "Absolute" 48P Steel...

Premium Heat Treated "ABSOLUTE" Steel Pinion Gears Super hard, heat treated, "Absolute" pinion ge...

Premium Heat Treated "ABSOLUTE" Steel Pinion Gears Super hard, heat treated, "Absolute" pinion gears are a must for using with steel spur gears, and will last and last if used with plastic spur gears. Available in sizes 9 through 28 teeth. All pinions stamped with tooth number. 3.17mm (1/8") bore. One 5-40 set screw included.

$5.99

Robinson Racing Super Hard "Absolute" 48P Steel...

Premium Heat Treated "ABSOLUTE" Steel Pinion Gears Super hard, heat treated, "Absolute" pinion ge...

Premium Heat Treated "ABSOLUTE" Steel Pinion Gears Super hard, heat treated, "Absolute" pinion gears are a must for using with steel spur gears, and will last and last if used with plastic spur gears. Available in sizes 9 through 28 teeth. All pinions stamped with tooth number. 3.17mm (1/8") bore. One 5-40 set screw included.

$14.49

Robinson Racing Hardened Steel Idler Gear

This is an optional Robinson Racing Hardened Steel Idler Gear, and is intended for use with the A...

This is an optional Robinson Racing Hardened Steel Idler Gear, and is intended for use with the Axial Wraith. This gear has been precision machined and hardened for the ultimate in reliability and performance. 

$8.99

Robinson Racing 48P Machined Pinion Gear (5mm B...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pi...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pitch spur, when using a motor that has a 5mm rotor shaft. Robinson Racing pinions are precision machined from high quality steel for durability, and have the number of teeth stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one pinion gear and one 4mm set screw.

$8.59

Robinson Racing 48P Machined Pinion Gear (5mm B...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pi...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pitch spur, when using a motor that has a 5mm rotor shaft. Robinson Racing pinions are precision machined from high quality steel for durability, and have the number of teeth stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one pinion gear and one 4mm set screw.

$8.59

Robinson Racing 48P Machined Pinion Gear (5mm B...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pi...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pitch spur, when using a motor that has a 5mm rotor shaft. Robinson Racing pinions are precision machined from high quality steel for durability, and have the number of teeth stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one pinion gear and one 4mm set screw.

$8.59

Robinson Racing 48P Machined Pinion Gear (5mm B...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pi...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pitch spur, when using a motor that has a 5mm rotor shaft. Robinson Racing pinions are precision machined from high quality steel for durability, and have the number of teeth stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one pinion gear and one 4mm set screw.

$5.49

Robinson Racing Absolute 32P Hardened Pinion Ge...

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited fo...

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited for use with Robinson steel spur gears. They feature an 1/8 inch bore, a 32 pitch tooth profile, with the tooth number stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one gear and one 5-40 set screw. 

$5.49

Robinson Racing Absolute 32P Hardened Pinion Ge...

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited fo...

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited for use with Robinson steel spur gears. They feature an 1/8 inch bore, a 32 pitch tooth profile, with the tooth number stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one gear and one 5-40 set screw.

$5.49

Robinson Racing Absolute 32P Hardened Pinion Ge...

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited fo...

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited for use with Robinson steel spur gears. They feature an 1/8 inch bore, a 32 pitch tooth profile, with the tooth number stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one gear and one 5-40 set screw.

$5.49

Robinson Racing Absolute 32P Hardened Pinion Ge...

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited fo...

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited for use with Robinson steel spur gears. They feature an 1/8 inch bore, a 32 pitch tooth profile, with the tooth number stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one gear and one 5-40 set screw. 

$5.49

Robinson Racing Absolute 32P Hardened Pinion Ge...

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited fo...

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited for use with Robinson steel spur gears. They feature an 1/8 inch bore, a 32 pitch tooth profile, with the tooth number stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one gear and one 5-40 set screw. 

$12.49

Robinson Racing Extra Hard Steel 32P Pinion Gea...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipp...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipper units 5mm Bore Fits 5mm motor shaft Available in multiple tooth count options, use the pull down menu above to pick the size you need  NOTE: RRP1200 5 m/m to 1/8 inch Reducer Sleeve required for 1/8 inch shaft motors. 32 pitch and .8 module gears can be used together with no adverse affects such as increased noise or increased wear. The difference is that .8 module gears have a slightly lar...

$12.49

Robinson Racing Extra Hard Steel 32P Pinion Gea...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipp...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipper units 5mm Bore Fits 5mm motor shaft Available in multiple tooth count options, use the pull down menu above to pick the size you need  NOTE: RRP1200 5 m/m to 1/8 inch Reducer Sleeve required for 1/8 inch shaft motors. 32 pitch and .8 module gears can be used together with no adverse affects such as increased noise or increased wear. The difference is that .8 module gears have a slightly lar...

$12.49

Robinson Racing Extra Hard Steel 32P Pinion Gea...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipp...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipper units 5mm Bore Fits 5mm motor shaft Available in multiple tooth count options, use the pull down menu above to pick the size you need  NOTE: RRP1200 5 m/m to 1/8 inch Reducer Sleeve required for 1/8 inch shaft motors. 32 pitch and .8 module gears can be used together with no adverse affects such as increased noise or increased wear. The difference is that .8 module gears have a slightly lar...

$12.49

Robinson Racing Extra Hard Steel .8 Mod Pinion ...

Robinson Racing Extra Hard Steel 5mm Bore .8 Mod Pinion Gears fit brushless motors with a 5mm sha...

Robinson Racing Extra Hard Steel 5mm Bore .8 Mod Pinion Gears fit brushless motors with a 5mm shaft and are intended for use with the Traxxas E-Maxx model #3905. These will also work with standard size brushless motors when used with the RRP1200 reducer sleeve, making them an excellent choice for the Traxxas Slash 4x4.

$12.49

Robinson Racing Extra Hard Steel .8 Mod Pinion ...

Robinson Racing Extra Hard Steel 5mm Bore .8 Mod Pinion Gears fit brushless motors with a 5mm sha...

Robinson Racing Extra Hard Steel 5mm Bore .8 Mod Pinion Gears fit brushless motors with a 5mm shaft and are intended for use with the Traxxas E-Maxx model #3905. These will also work with standard size brushless motors when used with the RRP1200 reducer sleeve, making them an excellent choice for the Traxxas Slash 4x4.

$12.49

Robinson Racing Extra Hard Steel .8 Mod Pinion ...

Robinson Racing Extra Hard Steel 5mm Bore .8 Mod Pinion Gears fit brushless motors with a 5mm sha...

Robinson Racing Extra Hard Steel 5mm Bore .8 Mod Pinion Gears fit brushless motors with a 5mm shaft and are intended for use with the Traxxas E-Maxx model #3905. These will also work with standard size brushless motors when used with the RRP1200 reducer sleeve, making them an excellent choice for the Traxxas Slash 4x4.

$4.89

Robinson Racing 3.17mm to 5mm Reducer Sleeve (1...

This is the Robinson Racing 1/8" to 5mm Reducer Sleeve. This sleeve will allow you to use 5mm bor...

This is the Robinson Racing 1/8" to 5mm Reducer Sleeve. This sleeve will allow you to use 5mm bore pinion gears on motors that have an 1/8" shaft.

$4.69

Robinson Racing Steel 48P Pinion Gear (3.17mm B...

These Robinson Racing Products 48 Pitch Pinion Gears are precision cut alloy steel gears that fea...

These Robinson Racing Products 48 Pitch Pinion Gears are precision cut alloy steel gears that feature a hard nickel coating for durability. The pinions have an 1/8" bore, are stamped with the tooth number for easy identification and include one 5-40 set screw. These gears are available in a variety of tooth count options to fine tune the torque and top speed of your vehicle.

$4.69

Robinson Racing Steel 48P Pinion Gear (3.17mm B...

These Robinson Racing Products 48 Pitch Pinion Gears are precision cut alloy steel gears that fea...

These Robinson Racing Products 48 Pitch Pinion Gears are precision cut alloy steel gears that feature a hard nickel coating for durability. The pinions have an 1/8" bore, are stamped with the tooth number for easy identification and include one 5-40 set screw. These gears are available in a variety of tooth count options to fine tune the torque and top speed of your vehicle.

$4.69

Robinson Racing Steel 48P Pinion Gear (3.17mm B...

These Robinson Racing Products 48 Pitch Pinion Gears are precision cut alloy steel gears that fea...

These Robinson Racing Products 48 Pitch Pinion Gears are precision cut alloy steel gears that feature a hard nickel coating for durability. The pinions have an 1/8" bore, are stamped with the tooth number for easy identification and include one 5-40 set screw. These gears are available in a variety of tooth count options to fine tune the torque and top speed of your vehicle

$7.99

Robinson Racing Axial Wraith SuperTuff 48P Plas...

This is an optional Robinson Racing SuperTuff 48 Pitch, 80 Tooth Plastic Spur Gear, and is intend...

This is an optional Robinson Racing SuperTuff 48 Pitch, 80 Tooth Plastic Spur Gear, and is intended for use with the Axial Wriath.

$18.99

Robinson Racing Hardened Steel Bottom Different...

This is an optional Robinson Racing Hardened Steel Bottom Differential Gear, and is intended for ...

This is an optional Robinson Racing Hardened Steel Bottom Differential Gear, and is intended for use with the Axial Wraith. This gear has been precision machined and hardened for the ultimate in reliability and performance. 

$39.99

Hot Racing Front Center Drive Shaft with Gear H...

Hot Racing optional upgrade heavy duty splined star drive center front driveshaft assemblies with...

Hot Racing optional upgrade heavy duty splined star drive center front driveshaft assemblies with Planetary Gear Housing for the TRA UDR FEATURES: - CNC machined aluminum slider tube- Planetary Gear Housing incorporated with Front Center Drive Shaft- Replaces factory plastic front drive axles and Planetary Gear Housing- hard anodized YOU WILL RECEIVE: - One (1) center front driveshaft with Planetary Gear Housing assembly REQUIREMENTS: - Installation at Center and front drive assembly- Recomme...

$20.99

Hot Racing Steel Spur Gear (56t 0.8 Mod)(Blue) ...

Hot Racing 56 tooth, 32 pitch (0.8 Mod) spur gear for the 1/10 TRA E-Revo, Jato 3.3, T-Maxx 3.3, ...

Hot Racing 56 tooth, 32 pitch (0.8 Mod) spur gear for the 1/10 TRA E-Revo, Jato 3.3, T-Maxx 3.3, T-Maxx 2.5R, and Summit FEATURES: - CNC machined and lightened hardened steel construction- Black oxide coating for durability and corrosion resistance- Blue anodized countersunk washers YOU WILL RECEIVE: - 56 tooth 32 pitch spur gear- Three (3) mounting screws- Three (3) blue anodized countersunk washers- Three (3) washers (use as needed underneath countersunk washers to prevent screw ends f...

$18.99

Hot Racing discontinued Steel High Speed Transm...

Hot Racing steel high speed transmission gear set for the 1/10th scale Axial Yeti and RR10 Bomber...

Hot Racing steel high speed transmission gear set for the 1/10th scale Axial Yeti and RR10 Bomber kit and RTR vehicles FEATURES: - CNC machined hardened #45 steel- Replaces stock powder metal gears- Black oxide coating for durability and corrosion resistance YOU WILL RECEIVE: - One (1) 26T, 48P top input gear- One (1) 28T, 48P bottom output gear SPECIFICATIONS: - Pitch: 48 pitch REQUIREMENTS: - Light application of gear lubricant COMMENTS: - Replaces powder metal Axial AX31130 High Speed...

$23.99

Hot Racing HD Spiral Cut Bevel Gear Set (38T/13...

Hot Racing steel helical spiral 38T/13T gear set for 1/10 Axial AX10, EXO, RR10 Bomber, SCX10, SM...

Hot Racing steel helical spiral 38T/13T gear set for 1/10 Axial AX10, EXO, RR10 Bomber, SCX10, SMT10, Wraith, and Yeti. The 38T/13T gear set is the stock gear ratio. FEATURES: - Precision machined helical spiral cut gears offer inherently greater strength and smooth operation than the factory bevel cut gears- High carbon steel construction- Stronger than the stock bevel-cut zinc cast gears- Maintains the stock 38T/13T ratio YOU WILL RECEIVE: - One (1) 38 tooth diff spiral cut ring gear- One (...

$13.99

Hot Racing Idler Gear Hardened Steel

This is the Hot Racing Hardened Steel Light Idler Gear for the Axial Wraith, AX10, and SCX10 tran...

This is the Hot Racing Hardened Steel Light Idler Gear for the Axial Wraith, AX10, and SCX10 transmissions.