Gears

Hot Racing HD Spiral Cut Bevel Gear Set (38T/13...

Hot Racing steel helical spiral 38T/13T gear set for 1/10 Axial AX10, EXO, RR10 Bomber, SCX10, SM...

Hot Racing steel helical spiral 38T/13T gear set for 1/10 Axial AX10, EXO, RR10 Bomber, SCX10, SMT10, Wraith, and Yeti. The 38T/13T gear set is the stock gear ratio. FEATURES: - Precision machined helical spiral cut gears offer inherently greater strength and smooth operation than the factory bevel cut gears- High carbon steel construction- Stronger than the stock bevel-cut zinc cast gears- Maintains the stock 38T/13T ratio YOU WILL RECEIVE: - One (1) 38 tooth diff spiral cut ring gear- One (...

Hot Racing Hard Anodized Aluminum Center Gear Set

Hot Racing optional light weight aluminum transmission gear set for three-gear transmissions foun...

Hot Racing optional light weight aluminum transmission gear set for three-gear transmissions found in the Axial AX10, SCX10, SCX10 II (RTR only), SMT10 monster, and Wraith. FEATURES: - Precision CNC machined 6061-T6 aluminum- Hard anodized gunmetal gray- Replaces the stock nylon gears- Light weight for less rotating mass YOU WILL RECEIVE: - All three gears (52T, 28T, 20T) REQUIREMENTS: - Light application of black grease on gears during installation COMMENTS: - Compatible with Axial three-ge...

Hot Racing Steel Super Duty 32p 57t Spur Gear

Hot Racing steel super duty 32 pitch, 57 tooth rock racer spur gear for 1/10th scale Axial electr...

Hot Racing steel super duty 32 pitch, 57 tooth rock racer spur gear for 1/10th scale Axial electric Wraith, AX10, and SCX series trucks FEATURES: -Rugged 32 pitch (0.8 module) teeth for total reliability when using high power brushless systems-CNC machined and lightened hardened steel construction-Black oxide coating for durability and corrosion resistance-Replaces stock nylon spur gear-Must use with 32 pitch (0.8 module) pinion gear, stock is 48 pitch YOU WILL RECEIVE: -57 tooth 32 pitch spu...

Hot Racing discontinued Long 15T Steel 32P Pini...

This is the 15 Tooth Optional Steel Pinion Gear for 5mm shaft FEATURES: CNC Steel Gear then Nitri...

This is the 15 Tooth Optional Steel Pinion Gear for 5mm shaft FEATURES: CNC Steel Gear then Nitriding to increased wear resistance, improved fatigue life, and enhanced corrosion resistantBlack Aluminum base constructionLonger Base surface for maximum contact YOU WILL RECEIVE: One pinion gearOne set screw 4x4mm REQUIREMENTS: 2mm hex wrench to install the set screw SPECIFICATIONS: length: (22mm)diameter: (5mm) COMMENTS: This gear is designed for 5mm Shaft. For 1/8 shaft use CB209L or RRP009

TeknoRC Pinion Gear (15t, MOD1, 5mm bore, M5 se...

The new line of Tekno RC M5 Pinion Gears stand out from the rest.  These are the ultimate pinions...

The new line of Tekno RC M5 Pinion Gears stand out from the rest.  These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application.  Sized from 11t all the way to 30t, you are sure to find the right gear ratio for racing or those insane speed runs.  The M5 set screw ensures that your gear will stay put during operation and ensure you won’t strip it out when you need to remove it.  The gears are CNC machined, lightened, then hardened for incredible durability.  A laser ...

Traxxas TRX-4 Machined Ring & Pinion Gear (11/34T)

Heavy-duty differential ring and pinion gears are machined from high-quality steel for unsurpasse...

Heavy-duty differential ring and pinion gears are machined from high-quality steel for unsurpassed strength and durability. Available in standard, underdrive and overdrive configurations, they allow you to tune your TRX-4® for greater climbing agility. Accessory part for these models: TRX-4® 1972 Chevrolet® Blazer® High Trail Edition™ TRX-4® 1979 Chevrolet® Blazer® TRX-4® 1979 Ford® Bronco® TRX-4® Chevrolet® K10 High Trail Edition™ TRX-4® Equipped with Traxx® TRX-4® Ford® Bronco® TRX-4® For...

Redcat Transmission/Transfer Case Input Gears (...

Redcat Transmission/Transfer Case Input Gears (13T) (2 pcs)

Redcat Transmission/Transfer Case Input Gears (13T) (2 pcs)

Redcat Transfer Case Gear Option Set (18T, 19T,...

Redcat Transfer Case Gear Option Set (18T, 19T, 25T, 26T) (1set)

Redcat Transfer Case Gear Option Set (18T, 19T, 25T, 26T) (1set)

Traxxas Rear Machined Portal Drive Input Gear (...

The Traxxas Rear Machined Portal Drive Input Gear is a heavy duty machined gear upgrade for Traxx...

The Traxxas Rear Machined Portal Drive Input Gear is a heavy duty machined gear upgrade for Traxxas TRX-4 and TRX-6 models. These gears require the TRA8063 heavy duty rear axle. Package includes one gear. Two gears are needed to complete the upgrade.

Traxxas Mod 0.8 TRX-4 Spur Gear (45T)

This is a replacement Traxxas 45 Tooth Mod 0.8 TRX-4 Spur Gear. 

This is a replacement Traxxas 45 Tooth Mod 0.8 TRX-4 Spur Gear. 

Traxxas Gear, 26-T pinion (48-pitch) (fits 3mm ...

26-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gea...

26-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model.

Traxxas Spur gear, 45-tooth

45-tooth spur gear (48-pitch) with telemetry magnet holder. Traxxas spur gears let you fine-tune ...

45-tooth spur gear (48-pitch) with telemetry magnet holder. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model.

Redcat Gen8 Underdrive Ring & Pinion Gear Set

Gen8 Underdrive Ring & Pinion Gear Set CNC 32T gear and CNC 10T gear To be installed in rear ...

Gen8 Underdrive Ring & Pinion Gear Set CNC 32T gear and CNC 10T gear To be installed in rear axle of Gen8 to provide a 9.5% under-drive. Per manufacturer site these posts are compatible with:  GEN8 AXE GEN8 V2 GEN8 SCOUT II

Traxxas Axle Ring Gear (2) with Axle Pinion Gea...

Traxxas Axle Ring Gear (2) with Axle Pinion Gear (2): TRX-4M, TRX4M

Traxxas Axle Ring Gear (2) with Axle Pinion Gear (2): TRX-4M, TRX4M

AXIAL 48P PORTAL GEAR SET 26T/15T (2): UTB18

AXIAL 48P PORTAL GEAR SET 26T/15T (2): UTB18

AXIAL 48P PORTAL GEAR SET 26T/15T (2): UTB18

Hot Racing 54 tooth, 32 pitch (0.8 Mod) spur gear

Hot Racing 54 tooth, 32 pitch (0.8 Mod) spur gear for the 1/10 Traxxas E-Revo, Jato 3.3, T-Maxx 3...

Hot Racing 54 tooth, 32 pitch (0.8 Mod) spur gear for the 1/10 Traxxas E-Revo, Jato 3.3, T-Maxx 3.3, T-Maxx 2.5R, Summit, Rally VXL, Slash 4X4, and Stampede 4X4   FEATURES: - CNC machined and lightened hardened steel construction- Black oxide coating for durability and corrosion resistance- Silver-colored countersunk washers   YOU WILL RECEIVE: - 54 tooth 32 pitch spur gear- Three (3) mounting screws- Three (3) silver-colored countersunk washers- Three (3) washers (use as needed underneath co...

Robinson Racing Extra Hard Steel Mod1 Pinion Ge...

Robinson Racing Extra Hard Steel 5mm Bore Mod1 Pinion gears were developed for 1/8 scale applica...

Robinson Racing Extra Hard Steel 5mm Bore Mod1 Pinion gears were developed for 1/8 scale applications and fit most 1/8 scale nitro spur gears perfectly. They are available in a variety of tooth count options to fine tune the torque and top speed of your model. Package includes one pinion gear and one 4x4mm set screw.

Robinson Racing Extra Hard Steel Mod1 Pinion Ge...

Robinson Racing Extra Hard Steel 5mm Bore Mod1 Pinion gears were developed for 1/8 scale applica...

Robinson Racing Extra Hard Steel 5mm Bore Mod1 Pinion gears were developed for 1/8 scale applications and fit most 1/8 scale nitro spur gears perfectly. They are available in a variety of tooth count options to fine tune the torque and top speed of your model. Package includes one pinion gear and one 4x4mm set screw.

Robinson Racing Extra Hard Steel Mod1 Pinion Ge...

Robinson Racing Extra Hard Steel 5mm Bore Mod1 Pinion gears were developed for 1/8 scale applica...

Robinson Racing Extra Hard Steel 5mm Bore Mod1 Pinion gears were developed for 1/8 scale applications and fit most 1/8 scale nitro spur gears perfectly. They are available in a variety of tooth count options to fine tune the torque and top speed of your model. Package includes one pinion gear and one 4x4mm set screw.

Robinson Racing Extra Hard Steel Mod1 Pinion Ge...

Robinson Racing Extra Hard Steel 5mm Bore Mod1 Pinion gears were developed for 1/8 scale applica...

Robinson Racing Extra Hard Steel 5mm Bore Mod1 Pinion gears were developed for 1/8 scale applications and fit most 1/8 scale nitro spur gears perfectly. They are available in a variety of tooth count options to fine tune the torque and top speed of your model. Package includes one pinion gear and one 4x4mm set screw.

Robinson Racing Extra Hard Steel Mod1 Pinion Ge...

Robinson Racing Extra Hard Steel 5mm Bore Mod1 Pinion gears were developed for 1/8 scale applica...

Robinson Racing Extra Hard Steel 5mm Bore Mod1 Pinion gears were developed for 1/8 scale applications and fit most 1/8 scale nitro spur gears perfectly. They are available in a variety of tooth count options to fine tune the torque and top speed of your model. Package includes one pinion gear and one 4x4mm set screw.

Arrma 6S BLX Main Spiral Cut Input Gear (10T)

This strong steel 10T Spiral Main Input Gear is the perfect part to carry in your RC tool box. F...

This strong steel 10T Spiral Main Input Gear is the perfect part to carry in your RC tool box. FEATURES Constructed from hard-wearing steel for long-lasting durability and consistent performance - Spiral-cut tooth profile - 10 precision manufactured gear teeth for smooth operation in extreme RC conditions - Uses ARRMA Safe-D keyed fit to Input Shaft Cup and composite sleeve for a more secure fit INCLUDES 1 x Main Input Gear 10T Spiral Cut REQUIRES To be used with main diff gear #AR310497...

Robinson Racing Axial Yeti Gen 3 Slipper Unit w...

This is an optional Robinson Racing Axial Yeti Gen 3 Slipper Unit with Blackened Steel Spur Gear....

This is an optional Robinson Racing Axial Yeti Gen 3 Slipper Unit with Blackened Steel Spur Gear. GEN3 Slipper Units will not fail under the enormous load conditions of todays brushless motor systems. The GEN3 Slipper Unit is a captured design to prevent slipper pad blowout and deliver maximum power to the ground. The hi-performance hardened steel spur gear will not fail or strip. Strong and tough gear teeth handle all the power you can pour on the spur gear. Aircraft grade billet aluminum ba...

Robinson Racing Gen3 Slipper Kit Steel Spur/Bac...

This is an optional Robinson Racing Gen3 Slipper Kit Steel Spur/Backplate, and is intended for us...

This is an optional Robinson Racing Gen3 Slipper Kit Steel Spur/Backplate, and is intended for use with the Brushless E-Revo. Robinson Racing GEN3 Slipper Units are over-engineered to meet the punishing demands of the most powerful brushless motor systems! GEN3 Slipper Units will not fail under the enormous load conditions of today's brushless motor systems. The new GEN3 Slipper Unit is a captured design to prevent slipper pad blowout and deliver maximum power to the ground. The hi-performanc...

Hot Racing Arrma 4x4 BLX Steel Helical Differen...

This is a Hot Racing Arrma 4x4 BLX Steel Helical Diff Ring and Pinion, an optional steel helical...

This is a Hot Racing Arrma 4x4 BLX Steel Helical Diff Ring and Pinion, an optional steel helical spiral 37T/13T gear set for Arrma 1/10 4WD. The 37T/13T gear set is the stock gear ratio. Features: Precision machined helical spiral cut gears offer inherently greater strength and smooth operation than the factory bevel gears. (it has been updated to 15g lighter) High carbon steel construction Stronger than the stock bevel Plastic gears Maintains the stock 37T/13T ratio Specifications: We...

Robinson Racing Super Hard "Absolute" 48P Steel...

Premium Heat Treated "ABSOLUTE" Steel Pinion Gears Super hard, heat treated, "Absolute" pinion ge...

Premium Heat Treated "ABSOLUTE" Steel Pinion Gears Super hard, heat treated, "Absolute" pinion gears are a must for using with steel spur gears, and will last and last if used with plastic spur gears. Available in sizes 9 through 28 teeth. All pinions stamped with tooth number. 3.17mm (1/8") bore. One 5-40 set screw included.

Robinson Racing Super Hard "Absolute" 48P Steel...

Premium Heat Treated "ABSOLUTE" Steel Pinion Gears Super hard, heat treated, "Absolute" pinion ge...

Premium Heat Treated "ABSOLUTE" Steel Pinion Gears Super hard, heat treated, "Absolute" pinion gears are a must for using with steel spur gears, and will last and last if used with plastic spur gears. Available in sizes 9 through 28 teeth. All pinions stamped with tooth number. 3.17mm (1/8") bore. One 5-40 set screw included.

Robinson Racing Super Hard "Absolute" 48P Steel...

Premium Heat Treated "ABSOLUTE" Steel Pinion Gears Super hard, heat treated, "Absolute" pinion ge...

Premium Heat Treated "ABSOLUTE" Steel Pinion Gears Super hard, heat treated, "Absolute" pinion gears are a must for using with steel spur gears, and will last and last if used with plastic spur gears. Available in sizes 9 through 28 teeth. All pinions stamped with tooth number. 3.17mm (1/8") bore. One 5-40 set screw included.

LaTrax Metal Differential Ring & Pinion Gear Set

This is a replacement LaTrax Metal Differential Ring and Pinion Gear Set. This set is used in the...

This is a replacement LaTrax Metal Differential Ring and Pinion Gear Set. This set is used in the front and rear differential.

Element RC 30T Factory Team Enduro Ring Gear

This is an optional Element RC 30T Factory Team Enduro Ring Gear, intended for use with the Endur...

This is an optional Element RC 30T Factory Team Enduro Ring Gear, intended for use with the Enduro 1/10 Rock Crawler kit. Features: 6 mounting screw holes for added durability Requires #42058 to mount into an Enduro 

Spur Gear (91T 48dp)

Product Details This high-quality Spur Gear is manufactured from hard-wearing, durable ma...

Product Details This high-quality Spur Gear is manufactured from hard-wearing, durable material Features Precision manufactured gear teeth for smooth, consistent performance - Tough molded composite material for long-lasting durability - Industry standard 48dp tooth profile - Designed for use with a single castellated slipper pad - Castellated slipper pads offer better engagement for dependable operation Includes 1 x Spur Gear (91T, 48dp) Requires To be used with #ARA310994

Element RC Enduro Pinion Gear (8T)

This is a replacement Element RC 8T Pinion Gear, intended for use with the Element Enduro. 

This is a replacement Element RC 8T Pinion Gear, intended for use with the Element Enduro. 

CNC Steel Gear Set for Gen8 Transmission and Tr...

CNC Steel Gear Set for Gen8 - (Total 4 Gears) Metal transfer case gear (25T), Metal transmission ...

CNC Steel Gear Set for Gen8 - (Total 4 Gears) Metal transfer case gear (25T), Metal transmission gear (20T), Metal Transmission / Transfer case input gear (13T Qty2)