SuperShafty
SuperShafty Sporty/Mini CP41/CS41/CP43/CP44 Weight Hangers
SKU: SS-00447
In stock, ready to ship
Style: FRONT: 13-Hole Sporty/Mini CP41/CP43/CP44
Pickup available at Key City Hobby
Usually ready in 1 hour
SuperShafty Sporty/Mini CP41/CS41/CP43/CP44 Weight Hangers
These are designed for both Mini and Sporty builds, positioning the tungsten weights lower and further forward than other printed hangers for better weight distribution. All are optimized to work with 1.9 and/or 2.2 Loaded Dice wheels and allow the wheel to be removed without removing the hanger. Each is printed in 2 parts and held together with M3 screws so your weights won't fall out. Because these sit down in the Loaded Dice wheel, if you plan to run large hubs, we recommend our Spacer Kit as well.
- Each hanger accommodates 13 Dux-style tungsten slugs (not included), adding 6.5 oz per side for a total of 13 oz of additional weight up front and as low as possible. That's 1 oz more than brass hangers with 8 tungsten slugs!
- These are printed in 2 parts and held together with M3 button head screws so your weights will never fall out.
- Optimized for CP41/CP43/CP44 axles and compatible with 2.2 Loaded Dice wheels, without requiring removal of the hanger to take off the wheel.
- Each hanger accommodates 9 Dux-style tungsten slugs (not included), adding 4.5 oz per side for a total of 9 oz of additional weight up front and as low as possible. That's 1 oz more than other printed hangers.
- These are printed in 2 parts and held together with M3 button head screws so your weights will never fall out.
- Optimized for CP41/CP43/CP44 axles and compatible with 1.9 and 2.2 Loaded Dice wheels, without requiring removal of the hanger to take off the wheel.
FRONT 6- Slug Dlux Knuckles/Mini/CS41
- Each hanger accommodates 6 Dux-style tungsten slugs (not included), adding 3 oz per side for a total of 6 oz of additional weight up front and as low as possible.
- These are printed in 2 parts and held together with M3 button head screws so your weights will never fall out.
- Optimized for Dlux knuckles and compatible with 1.9 Loaded Dice wheels, without requiring removal of the hanger to take off the wheel.
Rear: 5-Slug Sporty/Mini CP41/CP43/CP44
- Each hanger accommodates up to 5 Dux-style tungsten slugs (not included), adding 2.5 oz per side for a total of 5 oz of additional weight in the rear and as low as possible.
- These are printed in 2 parts and held together with M3 button head screws so your weights will never fall out.
- Optimized for CP41/CP43/CP44 axles and compatible with both 1.9 & 2.2 Loaded Dice wheels, without requiring removal of the hanger to take off the wheel.
SPACERS: 1mm, 2mm, 3mm
- Designed to work with the 13-Slug, 9-Slug, and 5-Slug hangers.
- Each pack includes two each of 1mm, 2mm, and 3mm spacers giving you the flexibility of up up to 6mm of offset.
Front: 13-Slug, 9-Slug, and Rear:5-Slug
- (1)Â Right Hanger
- (1)Â Left Hanger
- (8)Â M2.5 x 12mm Hex Head Screws
- (4)Â M2.5 Washers
Front: 6-Slug
- (1) Right Hanger
- (1) Left Hanger
SPACERS: 1mm, 2mm, 3mm
- (2) 1mm Spacers
- (2) 2mm Spacers
- (2) 3mm Spacers
Installation Tips (13-Slug, 9-Slug, and 5-Slug)
- Remove the stock hex screws
- Place the hangers over the stock portal covers.
- Use M2.5 x 12mm bolts with washers on the top two holes.
- Use 2 bolts without washers for the bottom holes.
- Apply a mild thread locker (blue) to prevent screws from backing out.
Note:Â If you are also running brass portal covers or our spacers, you will need longer M2.5 hex bolts. a multi pack is easily found on Amazon for $10. If you plan to run large hubs, you will need our spacer kit.
Covered against defects in workmanship.