IN STOCK! SHIPPING NOW!

INTRODUCING THE NEW SUPERSHAFTY CP41's

These axles were designed for two different markets: 

• SORRCA Class 1 
• and WRCCA 1.9 Mini or the UTB18 Mini Capra.

We designed these to fill that sweet spot in width that is perfect for a Class 1 and a Mini/UTB18.

Using full-sized, 1/10^th scale internals and machined out of 7075 aluminum, these are complete axle kits all with the bombproof durability and reliability you’ve come to expect from us. 

Key Features:

• 7.3" wide, Pin to Pin (Very close to the same as AR45P's)
• One piece housing construction is machined out of 7075 billet aluminum.
• Increased caster angle to 20° for improved steering without side effects of leaning them too far back. (Most stock is 8°)
• 50° of side-to-side steering, but easily modified for more should you desire.  Electronic end points are not enough to limit steering angle.
• AR44 standard sized ring pinion and 6 bolt spool. CP41’s come with 30/8 standard ratio.
• Axle shafts are shortened versions of the proven SuperShafty CP44 & CP43 shafts using the same sized U-joints and hardened axle shafts capable of 60° of steering.
• 3 and 4 link capable with included servo behind axle mount and a panhard mount built in if you would rather not use the servo mount but want to use a chassis mounted servo.
• AR44 style C-hubs.
• Front axle is available in left-hand drop
• Centered rear axle for the strongest setup available.
• The axles are greased with COW RC Udder Butter and ready to bolt directly in and run with the exception of steering links. These are not currently offered by us, but DLUX & Hardcore can get you setup with Steering links suited for your build.

Included in STEERING axle package $349.99:

• 1 Axle LEFT drop axle housing
• 1 Axle center section
• 2 differential bearing retainers
• 1 x 6 bolt spool
• 1 x 30t/8t AR44 style ring gear and pinion
• Hardware and bearings
• 2 x Universal axle shafts
• 1 x Behind axle servo mount
• Portal knuckles
• Portal gears
• Cow RC grease

Included in STRAIGHT axle package $269.99:

• 1 Axle housing
• 1 Axle center section
• 2 differential bearing retainers
• 1 x 6 bolt spool
• 1 x 30t/8t AR44 Style Ring gear and pinion
• Hardware and bearings
• 2 x Straight axle shafts
• 2 x portal cover end caps
  
• Portal gears
• Cow RC grease

Optional Rear Link Riser $19.99:

• SuperShafty CS41/CP41 Rear Link Riser with Hardware

Required:

• Steering Links
• 12mm Hexes of choice. 
  • We suggest AXI232018

Due to the Limited availability of color GunMetal Grey, we are offering them sold as Pairs.

Warranty:

• We are confident in our design and product. We want you to be too.
• These housings carry a 2 Year Bombproof guarantee against Defects and Accidental breakage. 
• We know you guys are going to beat on them. So, if something happens to them, we'll replace. (Does not apply to abuse)
• Axle shafts are not warrantied against breakage. Don't be dumb, and you won't break them though.
• YOU MUST run mechanical knuckle steering stops. Failure to do this may cause axle shaft breakage.
• Housing or knuckle modifications will void warranty replacement.