MEUS Racing CHEAT CODE V1 Capra 1.9 Isokinetic Axles
- 1. This CHEAT CODE version is specially designed for Capra 1.9 and DIY SCX10 SCX10 II chassis with lots of amazing upgrades and features.
- 2. Comes with modified wheel distance, 5mm shorter at the front and 10mm shorter at the rear than the normal version, making it easier to pass some narrower places to win points!
- 3. The thickened CVD brings better strength to overcome larger loads and tough terrain.
- 4. Made of high-quality aluminum alloy, equipped with 40CR 6mm output shaft(longer than 5mm stock shaft, fixed with M4 nut) and 20CR 8T-30T gears for greater hardness and durability.
- 5. US patented (Patent No.: US D1,053,707 S) Isokinetic 3-section CVD ensures that there are no jerks when turning at large angles; 52° max steering angle, default max.
- 6. The default steering angle is 48°; by grinding the limit structure on the knuckles, the steering angle can be changed up to 55°; meanwhile, changing the ET to get wider wheel spacing can avoid unnecessary interference.
- 7. The kit comes with front and rear axles. The front axle is equipped with a smaller C-Hub plus a 96g brass axle cover on each side to get a lower center of gravity for better trafficability; the Ackerman steering structure allows smoother steering and prevents tires from slipping sideways.
- 8. Providing 2 servo placement options for you to choose from according to different scenarios, adding a pre-drilled hole on the front axle for thrust rod installation for better stability.
Specifications:
- Axle housing material: Aluminum alloy
- Steering knuckle material: Brass
- Gear Cover: Brass
- Gear material: 20Cr Alloy Steel
- CVD shaft material: 40CR Alloy Steel
- Gear ratio: 8/30T
- Front axle total length: 214mm(8.42 in)
- Rear axle total length: 209mm(8.23 in)
- Front axle weight: 528.2g
- Rear axle weight: 248.4g
- Wheel hex adapter size: 6mm
- The rear axle portal gear ratio is: 23T/12T
One front axle bearing
- Bearings on both sides of the 30T gear: 2pcs 7×14×3.5mm
- Bearing size of the bevel gear: 1pc 5×14×5mm + 1 pc 5×11×4 mm
- Steering knuckle and C-Hub bearing size: 6pcs 5×11×4mm
- The output shaft bearing size: 2 pcs 6×12×4 mm
One rear axle bearing
- Bearings on both sides of the 30T gear: 2 pcs 7×14×3.5 mm
- Bearing size of the bevel gear: 1pc 5×14×5mm + 1 pc 5×11×4 mm
- Rear axle portal cover bearing size: 6 pcs 5×11×4 mm
- The output shaft bearing size: 2 pcs 6×12×4 mm
Note: The front and rear axles don't fit aftermarket portal covers. They don’t fit 100%, and they are not deep enough for the bearing.
If your axle differential gear has a sticking problem, please install an O-ring at this location (it comes with the 1/10 differential gear).
