$20 & Under

Robinson Racing Absolute 32P Hardened Pinion Ge...

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited fo...

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited for use with Robinson steel spur gears. They feature an 1/8 inch bore, a 32 pitch tooth profile, with the tooth number stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one gear and one 5-40 set screw.

Robinson Racing Extra Hard Steel 32P Pinion Gea...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipp...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipper units 5mm Bore Fits 5mm motor shaft Available in multiple tooth count options, use the pull down menu above to pick the size you need  NOTE: RRP1200 5 m/m to 1/8 inch Reducer Sleeve required for 1/8 inch shaft motors. 32 pitch and .8 module gears can be used together with no adverse affects such as increased noise or increased wear. The difference is that .8 module gears have a slightly lar...

Robinson Racing Extra Hard Steel 32P Pinion Gea...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipp...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipper units 5mm Bore Fits 5mm motor shaft Available in multiple tooth count options, use the pull down menu above to pick the size you need  NOTE: RRP1200 5 m/m to 1/8 inch Reducer Sleeve required for 1/8 inch shaft motors. 32 pitch and .8 module gears can be used together with no adverse affects such as increased noise or increased wear. The difference is that .8 module gears have a slightly lar...

Robinson Racing Extra Hard Steel 32P Pinion Gea...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipp...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipper units 5mm Bore Fits 5mm motor shaft Available in multiple tooth count options, use the pull down menu above to pick the size you need  NOTE: RRP1200 5 m/m to 1/8 inch Reducer Sleeve required for 1/8 inch shaft motors. 32 pitch and .8 module gears can be used together with no adverse affects such as increased noise or increased wear. The difference is that .8 module gears have a slightly lar...

Robinson Racing Extra Hard Steel 32P Pinion Gea...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipp...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipper units 5mm Bore Fits 5mm motor shaft Available in multiple tooth count options, use the pull down menu above to pick the size you need  NOTE: RRP1200 5 m/m to 1/8 inch Reducer Sleeve required for 1/8 inch shaft motors. 32 pitch and .8 module gears can be used together with no adverse affects such as increased noise or increased wear. The difference is that .8 module gears have a slightly lar...

Robinson Racing Extra Hard Steel 32P Pinion Gea...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipp...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipper units 5mm Bore Fits 5mm motor shaft Available in multiple tooth count options, use the pull down menu above to pick the size you need  NOTE: RRP1200 5 m/m to 1/8 inch Reducer Sleeve required for 1/8 inch shaft motors. 32 pitch and .8 module gears can be used together with no adverse affects such as increased noise or increased wear. The difference is that .8 module gears have a slightly lar...

Robinson Racing Extra Hard Steel 32P Pinion Gea...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipp...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipper units 5mm Bore Fits 5mm motor shaft Available in multiple tooth count options, use the pull down menu above to pick the size you need  NOTE: RRP1200 5 m/m to 1/8 inch Reducer Sleeve required for 1/8 inch shaft motors. 32 pitch and .8 module gears can be used together with no adverse affects such as increased noise or increased wear. The difference is that .8 module gears have a slightly lar...

Robinson Racing Extra Hard Steel 32P Pinion Gea...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipp...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipper units 5mm Bore Fits 5mm motor shaft Available in multiple tooth count options, use the pull down menu above to pick the size you need  NOTE: RRP1200 5 m/m to 1/8 inch Reducer Sleeve required for 1/8 inch shaft motors. 32 pitch and .8 module gears can be used together with no adverse affects such as increased noise or increased wear. The difference is that .8 module gears have a slightly lar...

Robinson Racing Extra Hard Steel .8 Mod Pinion ...

Robinson Racing Extra Hard Steel 5mm Bore .8 Mod Pinion Gears fit brushless motors with a 5mm sha...

Robinson Racing Extra Hard Steel 5mm Bore .8 Mod Pinion Gears fit brushless motors with a 5mm shaft and are intended for use with the Traxxas E-Maxx model #3905. These will also work with standard size brushless motors when used with the RRP1200 reducer sleeve, making them an excellent choice for the Traxxas Slash 4x4.

Losi Lasernut U4 Center Dogbone Set (2)

This is a replacement Losi Lasernut U4 Center Dogbone Set, two dogbones intended for use with the...

This is a replacement Losi Lasernut U4 Center Dogbone Set, two dogbones intended for use with the Lasernut U4 1/10 4WD Brushless RTR Rock Racer kit. Package includes two replacement dog bones used in the front center, and rear center position. 

Robinson Racing Steel 48P Pinion Gear (3.17mm B...

These Robinson Racing Products 48 Pitch Pinion Gears are precision cut alloy steel gears that fea...

These Robinson Racing Products 48 Pitch Pinion Gears are precision cut alloy steel gears that feature a hard nickel coating for durability. The pinions have an 1/8" bore, are stamped with the tooth number for easy identification and include one 5-40 set screw. These gears are available in a variety of tooth count options to fine tune the torque and top speed of your vehicle.

Robinson Racing Steel 48P Pinion Gear (3.17mm B...

These Robinson Racing Products 48 Pitch Pinion Gears are precision cut alloy steel gears that fea...

These Robinson Racing Products 48 Pitch Pinion Gears are precision cut alloy steel gears that feature a hard nickel coating for durability. The pinions have an 1/8" bore, are stamped with the tooth number for easy identification and include one 5-40 set screw. These gears are available in a variety of tooth count options to fine tune the torque and top speed of your vehicle.

Team Losi Racing 3x44mm Button Head Screws (4)

This is a set of four replacement Team Losi Racing 3x44mm Button Head Screws, and are intended fo...

This is a set of four replacement Team Losi Racing 3x44mm Button Head Screws, and are intended for use with the Team Losi Racing 22 and 22T 1/10 scale vehicles.

Losi Aluminum Rear Shock Tower: Tenacity Pro

This is an optional Losi Tenacity Pro Aluminum Rear Shock Tower, intended for use with the Losi T...

This is an optional Losi Tenacity Pro Aluminum Rear Shock Tower, intended for use with the Losi TENACITY DB Pro 1/10 Desert Buggy.

Losi Shock Springs 2.5” x 3.4 Rate (Silver) (2)

This is a set of two replacement 2.5" 3.4 rate silver shock springs from Losi.

This is a set of two replacement 2.5" 3.4 rate silver shock springs from Losi.

Losi Steering King Pins & Hardware

This is a set of replacement Losi King Pins and hardware, and are intended for use with the Losi ...

This is a set of replacement Losi King Pins and hardware, and are intended for use with the Losi 1/10 Comp Rock Crawler.

Losi Tenacity Pro Aluminum Front Shock Bodies (2)

This is a replacement set of  Losi Tenacity Pro Aluminum Front Shock Bodies, intended for use wit...

This is a replacement set of  Losi Tenacity Pro Aluminum Front Shock Bodies, intended for use with the Tenacity TT Pro 1/10 Scale 4WD Brushless Short Course Truck.

Losi Tenacity SCT Motor Mount

This is a replacement Losi Tenacity SCT Motor Mount. 

This is a replacement Losi Tenacity SCT Motor Mount. 

Losi TENACITY T Steering Drag Link

This is a replacement Losi Tenacity SCT Steering Drag Link. 

This is a replacement Losi Tenacity SCT Steering Drag Link. 

Losi Tenacity Pro Aluminum Shock Caps (2)

This is a replacement set of Losi Tenacity Pro Aluminum Shock Caps, intended for use with the Ten...

This is a replacement set of Losi Tenacity Pro Aluminum Shock Caps, intended for use with the Tenacity TT Pro 1/10 Scale 4WD Brushless Short Course Truck.

Losi M3x10mm Set Screws (10)

This is a pack of ten replacement Losi 3x10mm Set Screws. 

This is a pack of ten replacement Losi 3x10mm Set Screws. 

Losi TENACITY T Hingepin & Kingpin Set

This is a replacement Losi Tenacity SCT Hingepin and Kingpin Set.

This is a replacement Losi Tenacity SCT Hingepin and Kingpin Set.

Losi TENACITY T Diff Case Set

This is a replacement Losi Tenacity SCT Differential Case Set. 

This is a replacement Losi Tenacity SCT Differential Case Set. 

Losi Tenacity SCT Mod 1 Spur Gear (40T)

This is a replacement Losi Tenacity SCT 40 Tooth, Mod 1 Spur Gear.

This is a replacement Losi Tenacity SCT 40 Tooth, Mod 1 Spur Gear.

Losi Mod1 5mm Bore Pinion Gear

Losi Mod1 5mm Bore Pinion Gear. These gears are compatible with a variety of Losi brand 1/8 vehic...

Losi Mod1 5mm Bore Pinion Gear. These gears are compatible with a variety of Losi brand 1/8 vehicles, and are available in a variety of tooth count options to fine tune torque and top speed.

Losi TENACITY Differential Housing w/Integrated...

This is a replacement Losi Tenacity SCT Differential Housing with included gasket and o-rings.

This is a replacement Losi Tenacity SCT Differential Housing with included gasket and o-rings.

Losi TENACITY T Rear Hubs Set

This is a replacement Losi Tenacity SCT Rear Hub Set. 

This is a replacement Losi Tenacity SCT Rear Hub Set. 

Losi Tenacity T Rear Arm Set

This is a replacement Losi Tenacity SCT Rear Arm Set. These arms are directional and must be inst...

This is a replacement Losi Tenacity SCT Rear Arm Set. These arms are directional and must be installed on their intended side. 

Losi Tenacity TT Pro Spring Set

This is a replacement Losi Tenacity SCT Spring Set. This set includes two front and two rear spri...

This is a replacement Losi Tenacity SCT Spring Set. This set includes two front and two rear springs. 

Losi TENACITY T Rear Center Dogbone

This is a replacement Losi Tenacity SCT Rear Center Dogbone. 

This is a replacement Losi Tenacity SCT Rear Center Dogbone. 

Axial M4 Angled Rod Ends (10)

Axial M4 Angled Rod Ends. Package includes ten replacement angled rod ends that are used on the f...

Axial M4 Angled Rod Ends. Package includes ten replacement angled rod ends that are used on the front upper and lower links of the RBX10 Ryft.

Axial M4 Straight Rod Ends (10)

Axial M4 Straight Rod Ends. Package includes ten replacement angled rod ends that are used on the...

Axial M4 Straight Rod Ends. Package includes ten replacement angled rod ends that are used on the front and rear upper/lower links of the RBX10 Ryft.

Losi TENACITY T Rear Shock Shaft (2)

This is a pack of two replacement Losi Tenacity SCT Rear Shock Shafts. 

This is a pack of two replacement Losi Tenacity SCT Rear Shock Shafts.