$20 & Under

Traxxas Spinning carousel rack

Organize your shock oil in this spinning carousel rack. The carousel rides on bearings for smooth...

Organize your shock oil in this spinning carousel rack. The carousel rides on bearings for smooth spinning action.

Spektrum RC Male/Female Universal Bind Plug

This is a replacement bind plug from Spectrum. This plug is plugged into the Spektrum receiver or...

This is a replacement bind plug from Spectrum. This plug is plugged into the Spektrum receiver or into the charge jack on the switch to place the receiver into bind mode.

Team Losi Racing M4x25mm Button Head Screws (10)

This is a pack of ten replacement Team Losi Racing 4x25mm Button Head Hex Screws.

This is a pack of ten replacement Team Losi Racing 4x25mm Button Head Hex Screws.

Losi Button Head Screws M4x16mm (10)

This is a pack of ten replacement Team Losi Racing 4x16mm Button Head Hex Screws.

This is a pack of ten replacement Team Losi Racing 4x16mm Button Head Hex Screws.

Hex Socket Flat Head M3x12mm Black (10)

Redcat Steel Spur Gear (45T)

Steel Spur Gear (45T)(32P/0.8Mod)

Steel Spur Gear (45T)(32P/0.8Mod)

Heavy Duty Caster Mounts (L/R)(1pr)

Heavy Duty Caster Mounts (L/R)(1pr) This caster mounts allows the optional use of 3X18mm set scre...

Heavy Duty Caster Mounts (L/R)(1pr) This caster mounts allows the optional use of 3X18mm set screws (P/N RER11940 and P/N 18052) if the user wants to install the shock in double shear for additional strength.

Redcat Servo Horn (25T)(Aluminum)(1pc)

Servo Horn (25T)(Aluminum)(1pc)

Servo Horn (25T)(Aluminum)(1pc)

Snorkel (Plastic) (1pc)

Snorkel (Plastic) (1pc)

Snorkel (Plastic) (1pc)

Portal Axle Output Gear (17T 2pcs)

Redcat Scout II Gen8 Portal Axle Output Gear. These are the replacement lower portal box gears us...

Redcat Scout II Gen8 Portal Axle Output Gear. These are the replacement lower portal box gears used in the Redcat portal axle. Package includes two 17 tooth gears.

Redcat Aluminum Wheel Hex & Pin (4pcs ea.)

Redcat Everest Gen7 Wheel Hex Set. This is the replacement wheel hex used on the Everest Gen7 tru...

Redcat Everest Gen7 Wheel Hex Set. This is the replacement wheel hex used on the Everest Gen7 truck. Package includes four wheel hexes and four axle pins. 

INCISION ALUMINUM LOWER SPRING CUP FOR INCISION...

Aluminum lower spring cups replace the plastic stock spring cup. Package Includes: 2 pcs Aluminu...

Aluminum lower spring cups replace the plastic stock spring cup. Package Includes: 2 pcs Aluminum Lower Spring Cups Fits: VS4-10 Pro and VS4-10 Ultra 90mm Incision Shocks (IRC00210) 80mm Incision Shocks (IRC00215)

Arrma 4x4 Steering Block (2)

This is a replacement Arrma 4x4 Steering Block Set. 

This is a replacement Arrma 4x4 Steering Block Set. 

Sea Squirrel Shock Cup Set - Icon/Incision

Shock Cup Set for Icon or Incision 90mm Shocks to use the Mini-T Springs (front springs) in place...

Shock Cup Set for Icon or Incision 90mm Shocks to use the Mini-T Springs (front springs) in place of the stock springs. Replaces the upper and lower spring retainers. Includes: 4 Lower Spring Retainers & 4 Upper Adapters of the same color. 

Losi Tenacity SCT FR/R Pin Mount Cover

This is a replacement Losi Tenacity SCT FR/R Pin Mount Cover. 

This is a replacement Losi Tenacity SCT FR/R Pin Mount Cover. 

Losi TENACITY T Steering Bellcrank Set

This is a replacement Losi Tenacity SCT Steering Bellcrank Set. 

This is a replacement Losi Tenacity SCT Steering Bellcrank Set. 

Losi Aluminum Front Shock Tower: Tenacity Pro

Part Type Shocks & Shock Parts

Part Type Shocks & Shock Parts

Robinson Racing Steel 48P Pinion Gear (3.17mm B...

The 48 Pitch Hard Nickel Plated Alloy Steel Pinions are precision cut gears that last and last wh...

The 48 Pitch Hard Nickel Plated Alloy Steel Pinions are precision cut gears that last and last when used with a plastic spur gear. Pinions are stamped with tooth number. 1/8 inch bore. One 5-40 set screw included. 1/16 inch allen wrench (not included) fits the 5/40 set screw.

Extra Hard 23 Tooth Blackened Steel 32p Pinion,...

Extra hard high carbon motor pinions are built to last with our hi-performance GEN3 steel slippe...

Extra hard high carbon motor pinions are built to last with our hi-performance GEN3 steel slipper units. Made from high carbon steel and then heat treated to increase the hardness of the surface even more. High carbon steel is naturally higher in lubricity and lower in adhesion than milder grades of steel making these gears ideal for use with metal spur gears. All pinions precision machined and stamped with the number of teeth. One 4mm set screw included. 2mm allen wrench (NOT INCLUDED) fits...

Robinson Racing Extra Hard Steel 32P Pinion Gea...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipp...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipper units 5mm Bore Fits 5mm motor shaft Available in multiple tooth count options, use the pull down menu above to pick the size you need  NOTE: RRP1200 5 m/m to 1/8 inch Reducer Sleeve required for 1/8 inch shaft motors. 32 pitch and .8 module gears can be used together with no adverse affects such as increased noise or increased wear. The difference is that .8 module gears have a slightly lar...

Axial 3x12mm Button Head Screw (Black) (10)

This is a pack of ten Axial 3x12mm Button Head Screws.

This is a pack of ten Axial 3x12mm Button Head Screws.

Axial Gear Set

This is a replacement gear set from Axial. Includes the idler gear, and the output gear for the t...

This is a replacement gear set from Axial. Includes the idler gear, and the output gear for the transmission.

Tekno RC Aluminum Single Sided Clamping Servo H...

This is the Tekno RC Aluminum Single Sided Clamping Servo Horn for 25 tooth servo splines; such a...

This is the Tekno RC Aluminum Single Sided Clamping Servo Horn for 25 tooth servo splines; such as Futaba, Savox and ProTek R/C. This Tekno RC Aluminum Servo Horn is designed to minimize forces transmitted back to the servo spline. The horn utilizes a bottom mount design that, as opposed to a top mount, lowers the leverage point. This means your servo will be protected better to keep you in the race. There are two mounting positions to fine tune your application. A hefty M3 locking screw ensu...

Axial RBX10 Ryft Injection Molded Shock Parts

Axial RBX10 Ryft Injection Molded Shock Parts. Package includes replacement upper shock cap inser...

Axial RBX10 Ryft Injection Molded Shock Parts. Package includes replacement upper shock cap inserts, lower shock caps, pre-load collars, shock pistons and lower spring retainer cups.

Robinson Racing Extra Hard Steel .8 Mod Pinion ...

Robinson Racing Extra Hard Steel 5mm Bore .8 Mod Pinion Gears fit brushless motors with a 5mm sha...

Robinson Racing Extra Hard Steel 5mm Bore .8 Mod Pinion Gears fit brushless motors with a 5mm shaft and are intended for use with the Traxxas E-Maxx model #3905. These will also work with standard size brushless motors when used with the RRP1200 reducer sleeve, making them an excellent choice for the Traxxas Slash 4x4.

Losi 6x12mm Sealed Ball Bearing (4)

This is a set of four replacement 6x12mm sealed ball bearings from Losi. These are used as wheel ...

This is a set of four replacement 6x12mm sealed ball bearings from Losi. These are used as wheel bearings, as well as transmission bearings.

Arrma Infraction Front Splitter

Features: Precision manufactured mounting holes for fast and easy maintenance. Tough and hard w...

Features: Precision manufactured mounting holes for fast and easy maintenance. Tough and hard wearing material for long service life. Includes: (1) Front Splitter

Team Losi Racing Turnbuckle Wrench

This is the Team Losi Racing Turnbuckle Wrench. This hard-anodized turnbuckle wrench can be used ...

This is the Team Losi Racing Turnbuckle Wrench. This hard-anodized turnbuckle wrench can be used to adjust 3.5mm, 4mm and 5mm diameter turnbuckles. Lightweight and durable this wrench is a essential part of every racer's toolbox.Features: Lightweight and durable Hard-anodized

Robinson Racing 48P Machined Pinion Gear (5mm B...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pi...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pitch spur, when using a motor that has a 5mm rotor shaft. Robinson Racing pinions are precision machined from high quality steel for durability, and have the number of teeth stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one pinion gear and one 4mm set screw.

Robinson Racing 48P Machined Pinion Gear (5mm B...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pi...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pitch spur, when using a motor that has a 5mm rotor shaft. Robinson Racing pinions are precision machined from high quality steel for durability, and have the number of teeth stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one pinion gear and one 4mm set screw.

Robinson Racing 48P Machined Pinion Gear (5mm B...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pi...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pitch spur, when using a motor that has a 5mm rotor shaft. Robinson Racing pinions are precision machined from high quality steel for durability, and have the number of teeth stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one pinion gear and one 4mm set screw

Robinson Racing 48P Machined Pinion Gear (5mm B...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pi...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pitch spur, when using a motor that has a 5mm rotor shaft. Robinson Racing pinions are precision machined from high quality steel for durability, and have the number of teeth stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one pinion gear and one 4mm set screw.

Robinson Racing Absolute 32P Hardened Pinion Ge...

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited fo...

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited for use with Robinson steel spur gears. They feature an 1/8 inch bore, a 32 pitch tooth profile, with the tooth number stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one gear and one 5-40 set screw.