$20 & Under
$18.99
Hot Racing SCP125R Unibody Super Heavy Duty Dif...
Hot Racing optional super heavy duty solid billet steel front or rear differential (diff) locker ...
Hot Racing optional super heavy duty solid billet steel front or rear differential (diff) locker (spool) for the 1/10th scale Axial Yeti, Wraith, SCX10, AX10 (Deadbolt, Ridgecrest, Scorpion), EXO, and Scorpion vehicles. Replaces the factory plastic differential case and multi-component differential or locker setup on the factory Axial vehicle. If you crawl, this IS the upgrade to get. FEATURES: - CNC machined solid billet steel- Compatible with the front or rear differentials- Replaces stock ...
$8.99
Hot Racing discontinued Long 15T Steel 32P Pini...
This is the 15 Tooth Optional Steel Pinion Gear for 5mm shaft FEATURES: CNC Steel Gear then Nitri...
This is the 15 Tooth Optional Steel Pinion Gear for 5mm shaft FEATURES: CNC Steel Gear then Nitriding to increased wear resistance, improved fatigue life, and enhanced corrosion resistantBlack Aluminum base constructionLonger Base surface for maximum contact YOU WILL RECEIVE: One pinion gearOne set screw 4x4mm REQUIREMENTS: 2mm hex wrench to install the set screw SPECIFICATIONS: length: (22mm)diameter: (5mm) COMMENTS: This gear is designed for 5mm Shaft. For 1/8 shaft use CB209L or RRP009
$4.99
Fish's Crawler Parts Dlux Transmission Cover, O...
Dlux transmission cover for all of the hamburger transmissions.
Dlux transmission cover for all of the hamburger transmissions.
$7.99
Powerhobby Nut Driver Bit 5.5mm 1/4" Steel Driv...
Features: 1/4" drive steel hex tips Precision size Good for both power tool and hand tool Size:...
Features: 1/4" drive steel hex tips Precision size Good for both power tool and hand tool Size: 75mm long with 1/4″ Drive Hex
$7.99
Powerhobby Nut Driver Bit 4.0mm 1/4" Steel Driv...
Features: 1/4" drive steel hex tips Precision size Good for both power tool and hand tool Size:...
Features: 1/4" drive steel hex tips Precision size Good for both power tool and hand tool Size: 75mm long with 1/4″ Drive Hex
$14.99
Powerhobby Universal Spline Drive Shaft CVD 121...
Works with : Wraith SCX10 It uses universal cross knot structure and round brass beads in the mid...
Works with : Wraith SCX10 It uses universal cross knot structure and round brass beads in the middle. Low rotation sound, small virtual position, large transmission angle . The spline adopts six occlusal design, with large transmission torque, not easy to deform and low sound. Weight : 121-183mm: 57G
$3.99
RC4WD Miniature Scale Hex Bolts (M2 x 8mm) (Black)
RC4WD Miniature Scale Hex Bolts The first scale hex bolts made for R/C. Taking scale to the next ...
RC4WD Miniature Scale Hex Bolts The first scale hex bolts made for R/C. Taking scale to the next level. Specifications: High grade steel Durable black or silver finishes What's Included: 20x Miniature Scale Hex Bolts (M2 x 8mm) (Black) Optional Parts: RC4WD 4pc Precision Metric Hex/Nut Driver Set (Z-F0030) Notes: Uses Miniature Scale Hex Bolt Tool (M2 Hex) (Z-S0626) These hex bolts are very small, do not over tighten them. You can use your hand if you don't have the special lug too...
$14.99
HOLMES HOBBIES TRAILMASTER SPORT 550 55T
The TrailMaster Sport is a budget motor built for messy, dirty, off road action. Whether on the ...
The TrailMaster Sport is a budget motor built for messy, dirty, off road action. Whether on the rocks or in the dirt, the TrailMaster Sport is perfectly at home. Great choice for young drivers or running in the muck without ruining an expensive motor. FEATURES: Zero timing, universal installation and rotation direction 1/8th inch shaft diameter m3 mount holes, 25mm spacing, "540" standard ball bearing on output side bronze bushing on end bell side High strength Y45 Ferrite magnets Hol...
$19.99
HOLMES HOBBIES TRAILMASTER SPORT 550 45T
The TrailMaster Sport is a budget motor built for messy, dirty, off road action. Whether on the r...
The TrailMaster Sport is a budget motor built for messy, dirty, off road action. Whether on the rocks or in the dirt, the TrailMaster Sport is perfectly at home. Great choice for young drivers or running in the muck without ruining an expensive motor. FEATURES: Zero timing, universal installation and rotation direction 1/8th inch shaft diameter 36mm OD x 57mm length (not including shaft) 217g weight m3 mount holes, 25mm spacing, "540" standard ball bearing on output bronze bushing on end ...
$15.99
MIP Speed Tip Hex Driver Wrench GEN 2 3/32"
#9203S - MIP 3/32 Speed Tip Hex Driver Wrench Gen 2 MIP Gen 2 Tools: Same Iconic Look, Amplified ...
#9203S - MIP 3/32 Speed Tip Hex Driver Wrench Gen 2 MIP Gen 2 Tools: Same Iconic Look, Amplified Awesomeness! For over 30 years, MIP tools have been the bedrock of RC perfection. Our relentless pursuit of quality and performance has made us the go-to gear for enthusiasts who demand the best. Now, we're raising the bar again with the all-new MIP Gen 2 Speed Tips™. No More Wrench Wraps! MIP Gen 2 tools now boast laser-etched size markings that are clear, crisp, and impossible to miss. Plus, ea...
$15.99
MIP Speed Tip Hex Driver Wrench GEN 2, 1/16"
#9201S - MIP 1/16 Speed Tip Hex Driver Wrench Gen 2 MIP Gen 2 Tools: Same Iconic Look, Amplified ...
#9201S - MIP 1/16 Speed Tip Hex Driver Wrench Gen 2 MIP Gen 2 Tools: Same Iconic Look, Amplified Awesomeness! For over 30 years, MIP tools have been the bedrock of RC perfection. Our relentless pursuit of quality and performance has made us the go-to gear for enthusiasts who demand the best. Now, we're raising the bar again with the all-new MIP Gen 2 Speed Tips™. No More Wrench Wraps! MIP Gen 2 tools now boast laser-etched size markings that are clear, crisp, and impossible to miss. Plus, ea...
$4.99
DESIGNED FOR USE WITH TGH CREEPER-T WHEN INSTALLED ON AN ANGLED SKID STANDARD 3 GEAR BOLT PATTER...
DESIGNED FOR USE WITH TGH CREEPER-T WHEN INSTALLED ON AN ANGLED SKID STANDARD 3 GEAR BOLT PATTERN DECREASES STRAIN ON DRIVETRAIN WHEN MOUNTING TRANSMISSIONS ON ANGLED SKIDS
$4.99
5 Degree Shim Used for pitching the O.G. T-case, T-210, and 2.Low two hole bolt pattern.
5 Degree Shim Used for pitching the O.G. T-case, T-210, and 2.Low two hole bolt pattern.
$10.99
Hellfire Waterproofing and Customz Radio Wheel ...
Now from Hellfire Customs - Radio Wheel adapters. Designed and Engineered by Harley Designs. The...
Now from Hellfire Customs - Radio Wheel adapters. Designed and Engineered by Harley Designs. The radio wheel adapters will let you put a regular hex style wheel or VP SLW style wheel on your radio. This allows you to change the look and feel of you radio to best suit you. NOTE: This item is 3D printed. Due to the nature of 3D FDM printing this item may contain tiny visual blemishes and may require some trimming and detail painting for optimal visualappeal/fit. Similar to what you would expec...
$12.99
TeknoRC Pinion Gear (15t, MOD1, 5mm bore, M5 se...
The new line of Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions...
The new line of Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. Sized from 11t all the way to 30t, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won’t strip it out when you need to remove it. The gears are CNC machined, lightened, then hardened for incredible durability. A laser ...
$14.99
BowHouse RC TRX-4 Steering Servo Mount
The BowHouse RC Steering Servo Mount for the Traxxas TRX-4 replaces the stock servo mount and i...
The BowHouse RC Steering Servo Mount for the Traxxas TRX-4 replaces the stock servo mount and is designed to fit most standard sized servos (like the Holmes Hobbies SHV-500 servo shown in the pictures) without modification. This provides more secure mounting than the stock servo mount when upgrading to a more powerful, standard-sized servo. This version is printed in-house using carbon fiber-reinforced nylon.
$18.99
Hot Racing Traxxas TRX-4 Aluminum Motor Mount
This Traxxas TRX-4 Aluminum Motor Mount is an optional Aluminum Motor Mount for the TRX-4.Feature...
This Traxxas TRX-4 Aluminum Motor Mount is an optional Aluminum Motor Mount for the TRX-4.Features: CNC Aluminum construction Anodized black in color Replaces stock plastic mount Improves power transfer and lessens likelihood of motor over heating As the stock plastic 8 pinion gear attachment positions for 45T Spur gear Replace Traxxas TRA8290 Marking are laser engraved on motor mount
$8.99
Hot Racing AXR70FS148 Linear Rate Rock Crawler ...
Optional Linear rate Shock Spring Set for XR10 Rock Crawler ShockFEATURES:Soft Linear rate Spring...
Optional Linear rate Shock Spring Set for XR10 Rock Crawler ShockFEATURES:Soft Linear rate Springs, allow the optimum Max compression spring rate for each application. These Linear rate springs are soft to allow Max articulation, and Give it a low Low CG to resist rollover.YOU WILL RECEIVE:Soft Two 1.0 mm wire (Gold in color) (Rate 1.4)Ex- Soft Two 0.9mm wire (Silver in color).Ultra-soft Two 0.8mm wire (Black in color).REQUIREMENTS:The springs must be installed onto the built shock.SPECIFICAT...
$6.99
Kyosho W5198-60 55mm Rear Shock Spring (#75) (2...
Kyosho W5198-60 55mm Rear Shock Spring (#75) (2) Ultima RT5 / SC / DB
Kyosho W5198-60 55mm Rear Shock Spring (#75) (2) Ultima RT5 / SC / DB
$6.99
Kyosho W5199-75 55mm Front Shock Spring (#75) (...
Kyosho W5199-75 55mm Front Shock Spring (#75) (2) Ultima RT5 / SC / DB
Kyosho W5199-75 55mm Front Shock Spring (#75) (2) Ultima RT5 / SC / DB
$6.99
Kyosho W5198-02 58mm Shock Shaft (2) Ultima RT5...
Kyosho W5198-02 58mm Shock Shaft (2) Ultima RT5 / SC / DB / RB5 W5198-02 Shock Shaft (58mm/2pcs)
Kyosho W5198-02 58mm Shock Shaft (2) Ultima RT5 / SC / DB / RB5 W5198-02 Shock Shaft (58mm/2pcs)
$12.99
Dynamite Startup Tool Set: SCX24, AX24, 1/24
In The Box (1) .050' Hex Driver Wrench (1) 1.5mm Hex Driver Wrench (1) 4mm Nut Driver Wrenc...
In The Box (1) .050' Hex Driver Wrench (1) 1.5mm Hex Driver Wrench (1) 4mm Nut Driver Wrench (1) Stamped Ball Fork Tool With Multiple Open End Wrenches Including Sizes: 2, 3, 4, and 5mm (1) Carry Pouch Product Specifications Manufacturer # 605482764152 Tool Type Tool Set
$7.99
Furitek JST-PH 2 Pin to XT30 Battery Adapter Cable
Furitek JST-PH 2 Pin to XT30 Battery Adapter Cable FURITEK high quality XT30 to JST-PH conversion...
Furitek JST-PH 2 Pin to XT30 Battery Adapter Cable FURITEK high quality XT30 to JST-PH conversion cable is designed to support plug and play for lipo battery and Furitek esc. This high quality conversion cable helps eliminate the need for cutting and soldering cables and connectors. Application: for lipo batteries that have XT30 connectors to use with Furitek Tegu and Lizard ESCs. Note: NOT suitable for Furitek MOMENTUM esc
$17.99
Dlux Capra Sporty LCG Servo/Battery Mount
This is the servo mount we use on our Capra Sporty. It lowers the servo's position to keep the we...
This is the servo mount we use on our Capra Sporty. It lowers the servo's position to keep the weight lower and includes a battery mount. Battery mount designed for Turnigy nano-tech 450mAh 3S 65C Lipo. Other batteries of similar size will fit. Maximum battery size; 15.5 (W) X 60 (L) X 40mm (H). Each purchase includes: 1- Carbon Fiber Servo Mount Plate1- 3D Printed Battery Mount3- BHCS 6mm2- BHCS 8mm2- FHCS 8mm2- BHCS 25mm6- M3 Washers2- 4mm Aluminum Spacer1- Rod End Ball (for spacer)
$4.99
XT30 Male to Deans Female Battery Adapter
XT30 Male to Deans Female Battery Adapter
XT30 Male to Deans Female Battery Adapter
$16.99
AXIAL AR44 STRAIGHT AXLE SHAFT 5X106MM (2)
Axial AR44 5x106mm Straight Axle Shaft. Package includes two 5x106mm axle shafts.
Axial AR44 5x106mm Straight Axle Shaft. Package includes two 5x106mm axle shafts.
$9.99
Treal Traxxas TRX-4 Brass Extended Wheel Hub Ha...
Treal Hobby Traxxas TRX-4 Brass Extended Wheel Hub Hardware. This optional set is intended for th...
Treal Hobby Traxxas TRX-4 Brass Extended Wheel Hub Hardware. This optional set is intended for the Traxxas TRX-4 platforms equipped with 15mm brass extended wheel hubs. Includes: (8) Barrel nuts (8) Hub Pins (8) Washer-1 (8) Washer-2
$15.99
DS Racing Drift Element 6 Spoke Drift Wheels (G...
The DS Racing Drift Element 6 Spoke Drift Wheels are a great option to add that custom look to yo...
The DS Racing Drift Element 6 Spoke Drift Wheels are a great option to add that custom look to your RC drift car. These wheels feature an adjustable offset allowing you to have a factory, tucked or even stanced look. Each wheel is broken down into five pieces: Inner wheel, Outer wheel, Wheel Face, Inner rivet ring and Outer rivet ring. DS Racing has made these components available in multiple color and style options allowing you to select the wheels that will best match your build.Assembly NO...
$12.99
DS Racing Drift Element 6 Spoke Drift Wheels (T...
The DS Racing Drift Element 6 Spoke Drift Wheels are a great option to add that custom look to yo...
The DS Racing Drift Element 6 Spoke Drift Wheels are a great option to add that custom look to your RC drift car. These wheels feature an adjustable offset allowing you to have a factory, tucked or even stanced look. Each wheel is broken down into five pieces: Inner wheel, Outer wheel, Wheel Face, Inner rivet ring and Outer rivet ring. DS Racing has made these components available in multiple color and style options allowing you to select the wheels that will best match your build.Assembly NO...
$12.99
DS Racing Drift Element 5 Spoke Drift Wheels (T...
The DS Racing Drift Element 5 Spoke Drift Wheels are a great option to add that custom look to yo...
The DS Racing Drift Element 5 Spoke Drift Wheels are a great option to add that custom look to your RC drift car. These wheels feature an adjustable offset allowing you to have a factory, tucked or even stanced look. Each wheel is broken down into five pieces: Inner wheel, Outer wheel, Wheel Face, Inner rivet ring and Outer rivet ring. DS Racing has made these components available in multiple color and style options allowing you to select the wheels that will best match your build. Assembly N...
$5.99
$7.99
Redcat Front Lower/Rear Upper Links (88.5mm)(2 ...
Redcat Front Lower/Rear Upper Links (88.5mm)(2 pcs)
Redcat Front Lower/Rear Upper Links (88.5mm)(2 pcs)
$5.99
Redcat Transmission/Transfer Case Input Gears (...
Redcat Transmission/Transfer Case Input Gears (13T) (2 pcs)
Redcat Transmission/Transfer Case Input Gears (13T) (2 pcs)
$2.99
Redcat Rear Outer Portal Housing Set (L/R)
Rear Outer Portal Housing Set (L/R) *Screws not included* RER11378 2*6mm cap headRER11381 2*14m...
Rear Outer Portal Housing Set (L/R) *Screws not included* RER11378 2*6mm cap headRER11381 2*14mm cap head
$5.99
Redcat Steering Link (96mm) (1 pc)
Redcat Steering Link (96mm) (1 pc)
Redcat Steering Link (96mm) (1 pc)
$9.99
Redcat Front/Rear Bumper Set w/ Mounts (Dovetai...
Redcat Front/Rear Bumper Set w/ Mounts (Dovetail) (1 set)
Redcat Front/Rear Bumper Set w/ Mounts (Dovetail) (1 set)
$5.99
Redcat 4x11.5mm Hex Screw Pin (10 pcs)
Redcat 4x11.5mm Hex Screw Pin (10 pcs)
Redcat 4x11.5mm Hex Screw Pin (10 pcs)
$7.99
Redcat Transmission Housing Set (1 set)
Redcat Transmission Housing Set (1 set)
Redcat Transmission Housing Set (1 set)
$5.99
Redcat Transfer Case Gear Option Set (18T, 19T,...
Redcat Transfer Case Gear Option Set (18T, 19T, 25T, 26T) (1set)
Redcat Transfer Case Gear Option Set (18T, 19T, 25T, 26T) (1set)
$15.99
Redcat Portal Center Gearbox Housing(2pcs)
Portal Center Gearbox Housing(2pcs)
Portal Center Gearbox Housing(2pcs)
$8.99
Redcat Rear Lower Links(96mm)(2pcs)
Redcat Rear Lower Links(96mm)(2pcs)
Redcat Rear Lower Links(96mm)(2pcs)
$7.49
Traxxas Locking Differential Linkage
Locking differential linkage includes ball cup, links, bellcrank, bellcrank mount, and 3x10 mm sc...
Locking differential linkage includes ball cup, links, bellcrank, bellcrank mount, and 3x10 mm screw.
$3.99
Traxxas Blue Rubber Shield Ball Bearings, 5x8x2...
Pair of 5x8x2.5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime ou...
Pair of 5x8x2.5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction.
$3.99
Axial SCX10 Wraith Thin Hex Nut M3 Black (10)
Axial AXA1040 SCX10 Wraith Thin Hex Nut M3 Black (10) Features: Steel construction, black in colo...
Axial AXA1040 SCX10 Wraith Thin Hex Nut M3 Black (10) Features: Steel construction, black in color Includes: Ten 3mm Hex Nuts Requires: Installation Specs: Thread Size: 3mm Hex Size: 5.5mm Thickness: 2.3mm
$15.99
ProTek RC "TruTorque" 4-in-1 Multi-Wrench
This is the ProTek R/C "TruTorque" 4-in-1 Multi-Wrench. No one wants to spend money on low qualit...
This is the ProTek R/C "TruTorque" 4-in-1 Multi-Wrench. No one wants to spend money on low quality tools. Tools are an investment that should not be taken lightly and are one of the few items that should outlast the life of the model you are working on...and remain with you for years after. With so many choices available, the decision can be overwhelming. So ProTek R/C has stepped up again, expanding its product line with a complete range of affordable, high quality tools that help to make th...