$20 & Under

$8.99

RPM Rear Bearing Carriers for the Traxxas Slash...

RPM Rear Bearing Carriers for the Traxxas Slash 2wd, Nitro Slash, e-Stampede 2wd & e-Rustler ...

RPM Rear Bearing Carriers for the Traxxas Slash 2wd, Nitro Slash, e-Stampede 2wd & e-Rustler Quick Notes:– fits the Traxxas Slash 2wd,  e-Rustler, e-Stampede 2wd & Bandit– replaces stock Traxxas #3752– 5x11x4mm. bearings not included– not for use on 4×4 versions of the Rustler, Stampede or Slash Overview: Identical in strength and performance as RPM's Front Bearing Carriers, these rear carriers will get you to the finish line every time! Our bearing carriers are molded from RPM’s bul...

$8.99

RPM Front Bearing Carrier Set (Black) (2) (Slas...

RPM Front Bearing Carrier Set (Black) (2) (Slash, Bandit, Rustler, Stampede) Quick Links:– fits t...

RPM Front Bearing Carrier Set (Black) (2) (Slash, Bandit, Rustler, Stampede) Quick Links:– fits the Traxxas Slash 2wd, Nitro Slash, e-Rustler, e-Stampede 2wd & Bandit VXL– replaces stock Traxxas #3736– 5x11x4mm. bearings not included– optional matching Rear Bearing Carriers also available– optional matching Caster Blocks also available Overview: RPM bearing carriers are the perfect solution for a nearly indestructible front axle carrier to handle your toughest race or bash session. Our ...

$11.99

RPM Shock Shaft Guards for Traxxas & Durango 1/...

Quick Notes:– fits Traxxas 1:10 scale Ultra and “Big Bore” shocks– fits Durango 1:10 scale shocks...

Quick Notes:– fits Traxxas 1:10 scale Ultra and “Big Bore” shocks– fits Durango 1:10 scale shocks Overview: Rocks, dirt and debris striking shock shafts lead to dents, dings and burrs, which in turn, leads to torn shock seals. Torn shock seals means leaky shocks and poor shock performance. RPM Shock Shaft Guards shield the shock shaft from those deteriorating elements, prolonging the life of the shock shaft, which improves the long-term performance of the suspension and in turn, prolongs the ...

$12.99

RPM Traxxas Slash Front Bumper & Skid Plate (Bl...

Quick Notes:– replaces stock Traxxas #5835 Overview: Our two-piece Front Bumper for the Traxxas S...

Quick Notes:– replaces stock Traxxas #5835 Overview: Our two-piece Front Bumper for the Traxxas Slash 2wd & Nitro Slash is simple, yet strong and effective. This design gives the Slash owner the option of full front-end protection with all three components installed. Alternately, they can remove the bumper and use the skid plate mount and skid plate as a light-weight alternative. Running the skid plate alone sheds 27 grams (almost a full ounce) from the front end of the truck. Once the ra...

$11.99

RPM Front Bulkhead for most 1:10 Scale Traxxas ...

Quick Notes:– replaces stock Traxxas #2530 & #2530A– fits the Slash 2wd, Nitro Slash, Bandit,...

Quick Notes:– replaces stock Traxxas #2530 & #2530A– fits the Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants) Overdrive: One of the most highly sought-after RPM parts is here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. RPM's engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does...

$10.99

RPM Front A-Arms for the Traxxas Slash 2WD, Nit...

RPM Front Arms for the Traxxas Slash 2wd, Nitro Slash, e-Rustler & e-Stampede Quick Notes:– f...

RPM Front Arms for the Traxxas Slash 2wd, Nitro Slash, e-Rustler & e-Stampede Quick Notes:– fits all versions of the Traxxas Slash 2wd, Nitro Slash, electric Stampede 2wd & electric      Rustler– nearly 25% lighter than stock– replaces stock Traxxas #3631 Overview RPM front A-arms for the electric versions of the Traxxas Slash 2wd, Rustler & Stampede 2wd as well as the Nitro Slash are built to withstand some of the toughest abuse. Incredibly, RPM was able to shave some unwanted un...

$11.99

RPM Mock Mirror Turbos (Chrome) (2)

This is an optional set of scale RPM Mock Mirror Chrome Turbos. Mirror turbos take the lack of sy...

This is an optional set of scale RPM Mock Mirror Chrome Turbos. Mirror turbos take the lack of symmetry out of twin turbo set-ups by utilizing one clockwise rotating turbo and one counter-clockwise rotating unit. A set-up such as this leaves the engine bay clean and balanced, unlike a standard twin turbo set-up. Now you can show off a mirror turbo system in your favorite 1/8 – 1/12 scale ride with a pair of RPM Mirror Turbos prominently perched on your hood. These turbos have a cool, recesse...

$4.99

Powershift RC XT-60 Pass Through w/JST Port

The Powershift XT 60 Pass Through is a handy device that makes it easy to power your light kit, o...

The Powershift XT 60 Pass Through is a handy device that makes it easy to power your light kit, or other accessories. The pass through plugs in between your ESC and battery and will provide the same voltage as the battery it is connected to. The pass through is built with genuine Amass XT60 connectors, and has a male JST port with 3" lead to supply power to your chosen accessory. Package includes one XT60 pass through.

$16.99

Powershift RC Night Killer™ Light Series, big s...

From the Night Killer™ Light Series comes a square light pod system. Running BEST on 12V, you wil...

From the Night Killer™ Light Series comes a square light pod system. Running BEST on 12V, you will not be asking for more light. With the one screw mount base you are ready to attach these killers to any spot on your build. Use them as rock lights, hood mounted lights, or rear mounted lights to blind the driver behind you tailgating! Just like all Night Killer™ lights, they are Bright On Purpose. Two come in a package Add your own connectors

$19.99

Powershift RC Blister the Night 22mm Round Pods

Powershift RC Blister the Night 22mm Round Light Pods

Powershift RC Blister the Night 22mm Round Light Pods

$15.99

Powershift RC Jerry Can for DMS Dead Man Switch...

The Powershift DMS Jerry Can is a unique component that offers the functionality of a power switc...

The Powershift DMS Jerry Can is a unique component that offers the functionality of a power switch, combined with the added details of a scale accessory that allows you to power up or power off your rig without removing the body! The Made in the USA system consists of two primary pieces - the base that the included power leads connect to, and an upper half that completes the circuit when attached. Rare earth magnets in the base and upper half join the two halves together securely, and prevent...

$4.99

Shift RCS Winch Line (Black)

Shift RCS Winch Line

Shift RCS Winch Line

$7.99

RC4WD Strobe Lighting Unit

RC4WD Strobe Lighting Unit Make those LED light flash in many configurations with the RC4WD stro...

RC4WD Strobe Lighting Unit Make those LED light flash in many configurations with the RC4WD strobe lighting unit. Specifications: Easy Plug and Play M1.6 Mounting Tabs 1x Futaba Female Connector 1x Futaba Male Connector Capable of 11.1 Volts and 7.4 Volts Hole to Hole Length: 1.06in / 27mm Total Length: 12.8in / 325mm Weight: 0.14oz / 4g What's Included: 1x RC4WD Strobe Lighting Unit 2x Regular M1.6 Nuts (Silver) (Z-S1230) 2x Steel Socket Head Cap Screws M1.6 x 4mm (Z-S1482)

$18.99

Hot Racing discontinued Steel High Speed Transm...

Hot Racing steel high speed transmission gear set for the 1/10th scale Axial Yeti and RR10 Bomber...

Hot Racing steel high speed transmission gear set for the 1/10th scale Axial Yeti and RR10 Bomber kit and RTR vehicles FEATURES: - CNC machined hardened #45 steel- Replaces stock powder metal gears- Black oxide coating for durability and corrosion resistance YOU WILL RECEIVE: - One (1) 26T, 48P top input gear- One (1) 28T, 48P bottom output gear SPECIFICATIONS: - Pitch: 48 pitch REQUIREMENTS: - Light application of gear lubricant COMMENTS: - Replaces powder metal Axial AX31130 High Speed...

$3.99

Hot Racing discontinued Super Light Aluminum Ho...

These are Hot Racing 5x18mm Light weight Aluminum hollow Shaftsfor the Axial Scorpion Rock Crawle...

These are Hot Racing 5x18mm Light weight Aluminum hollow Shaftsfor the Axial Scorpion Rock Crawler. FEATURES: CNC aluminum construction, hard anodized YOU WILL RECEIVE: Two 5x18mm shafts REQUIREMENTS: Installation on the Rock Crawler SPECIFICATIONS: length: .70" (18mm)diameter: .19" (5mm)

$18.99

Hot Racing SCP125R Unibody Super Heavy Duty Dif...

Hot Racing optional super heavy duty solid billet steel front or rear differential (diff) locker ...

Hot Racing optional super heavy duty solid billet steel front or rear differential (diff) locker (spool) for the 1/10th scale Axial Yeti, Wraith, SCX10, AX10 (Deadbolt, Ridgecrest, Scorpion), EXO, and Scorpion vehicles. Replaces the factory plastic differential case and multi-component differential or locker setup on the factory Axial vehicle. If you crawl, this IS the upgrade to get. FEATURES: - CNC machined solid billet steel- Compatible with the front or rear differentials- Replaces stock ...

$8.99

Hot Racing discontinued Long 15T Steel 32P Pini...

This is the 15 Tooth Optional Steel Pinion Gear for 5mm shaft FEATURES: CNC Steel Gear then Nitri...

This is the 15 Tooth Optional Steel Pinion Gear for 5mm shaft FEATURES: CNC Steel Gear then Nitriding to increased wear resistance, improved fatigue life, and enhanced corrosion resistantBlack Aluminum base constructionLonger Base surface for maximum contact YOU WILL RECEIVE: One pinion gearOne set screw 4x4mm REQUIREMENTS: 2mm hex wrench to install the set screw SPECIFICATIONS: length: (22mm)diameter: (5mm) COMMENTS: This gear is designed for 5mm Shaft. For 1/8 shaft use CB209L or RRP009

$4.99

Fish's Crawler Parts Dlux Transmission Cover, O...

Dlux transmission cover for all of the hamburger transmissions.

Dlux transmission cover for all of the hamburger transmissions.

$11.99

Powerhobby 1/10 Rock Crawler 1.9 / 2.2 Wheels A...

Convenient tool for assembling and removing wheels Fits 1.9, 2.2 inch RC wheels   *Tire not inclu...

Convenient tool for assembling and removing wheels Fits 1.9, 2.2 inch RC wheels   *Tire not included*

$7.99

Powerhobby Nut Driver Bit 5.5mm 1/4" Steel Driv...

Features: 1/4" drive steel hex tips Precision size Good for both power tool and hand tool Size:...

Features: 1/4" drive steel hex tips Precision size Good for both power tool and hand tool Size: 75mm long with 1/4″ Drive Hex

$7.99

Powerhobby Nut Driver Bit 4.0mm 1/4" Steel Driv...

Features: 1/4" drive steel hex tips Precision size Good for both power tool and hand tool Size:...

Features: 1/4" drive steel hex tips Precision size Good for both power tool and hand tool Size: 75mm long with 1/4″ Drive Hex

$14.99

Powerhobby Universal Spline Drive Shaft CVD 121...

Works with : Wraith SCX10 It uses universal cross knot structure and round brass beads in the mid...

Works with : Wraith SCX10 It uses universal cross knot structure and round brass beads in the middle. Low rotation sound, small virtual position, large transmission angle . The spline adopts six occlusal design, with large transmission torque, not easy to deform and low sound. Weight : 121-183mm: 57G

$6.99

Powerhobby Aluminum 24T Axial SCX24 Stock Servo...

This horn will only fit the stock servo of SCX24 that comes with RTR SCX24 models. Aluminum servo...

This horn will only fit the stock servo of SCX24 that comes with RTR SCX24 models. Aluminum servo horn designed to give you the best steering lock when paired with the stock servo on your Axial SCX24! Locked in place with a screw to prevent any falling out whilst out on the trails.

$3.99

RC4WD Miniature Scale Hex Bolts (M2 x 8mm) (Black)

RC4WD Miniature Scale Hex Bolts The first scale hex bolts made for R/C. Taking scale to the next ...

RC4WD Miniature Scale Hex Bolts The first scale hex bolts made for R/C. Taking scale to the next level. Specifications: High grade steel Durable black or silver finishes What's Included: 20x Miniature Scale Hex Bolts (M2 x 8mm) (Black) Optional Parts: RC4WD 4pc Precision Metric Hex/Nut Driver Set (Z-F0030) Notes: Uses Miniature Scale Hex Bolt Tool (M2 Hex) (Z-S0626) These hex bolts are very small, do not over tighten them. You can use your hand if you don't have the special lug too...

$14.99

HOLMES HOBBIES TRAILMASTER SPORT 550 55T

The TrailMaster Sport is a budget motor built for messy, dirty, off road action. Whether on the ...

The TrailMaster Sport is a budget motor built for messy, dirty, off road action. Whether on the rocks or in the dirt, the TrailMaster Sport is perfectly at home. Great choice for young drivers or running in the muck without ruining an expensive motor. FEATURES: Zero timing, universal installation and rotation direction 1/8th inch shaft diameter m3 mount holes, 25mm spacing, "540" standard ball bearing on output side bronze bushing on end bell side High strength Y45 Ferrite magnets Hol...

$19.99

HOLMES HOBBIES TRAILMASTER SPORT 550 45T

The TrailMaster Sport is a budget motor built for messy, dirty, off road action. Whether on the r...

The TrailMaster Sport is a budget motor built for messy, dirty, off road action. Whether on the rocks or in the dirt, the TrailMaster Sport is perfectly at home. Great choice for young drivers or running in the muck without ruining an expensive motor.   FEATURES: Zero timing, universal installation and rotation direction 1/8th inch shaft diameter 36mm OD x 57mm length (not including shaft) 217g weight m3 mount holes, 25mm spacing, "540" standard ball bearing on output bronze bushing on end ...

$15.99

MIP Speed Tip Hex Driver Wrench GEN 2 3/32"

#9203S - MIP 3/32 Speed Tip Hex Driver Wrench Gen 2 MIP Gen 2 Tools: Same Iconic Look, Amplified ...

#9203S - MIP 3/32 Speed Tip Hex Driver Wrench Gen 2 MIP Gen 2 Tools: Same Iconic Look, Amplified Awesomeness! For over 30 years, MIP tools have been the bedrock of RC perfection. Our relentless pursuit of quality and performance has made us the go-to gear for enthusiasts who demand the best. Now, we're raising the bar again with the all-new MIP Gen 2 Speed Tips™. No More Wrench Wraps! MIP Gen 2 tools now boast laser-etched size markings that are clear, crisp, and impossible to miss. Plus, ea...

$15.99

MIP Speed Tip Hex Driver Wrench GEN 2, 1/16"

#9201S - MIP 1/16 Speed Tip Hex Driver Wrench Gen 2 MIP Gen 2 Tools: Same Iconic Look, Amplified ...

#9201S - MIP 1/16 Speed Tip Hex Driver Wrench Gen 2 MIP Gen 2 Tools: Same Iconic Look, Amplified Awesomeness! For over 30 years, MIP tools have been the bedrock of RC perfection. Our relentless pursuit of quality and performance has made us the go-to gear for enthusiasts who demand the best. Now, we're raising the bar again with the all-new MIP Gen 2 Speed Tips™. No More Wrench Wraps! MIP Gen 2 tools now boast laser-etched size markings that are clear, crisp, and impossible to miss. Plus, ea...

$4.99

Team Garage Hack H-WEDGE

DESIGNED FOR USE WITH TGH CREEPER-T WHEN INSTALLED ON AN ANGLED SKID STANDARD 3 GEAR BOLT PATTER...

DESIGNED FOR USE WITH TGH CREEPER-T WHEN INSTALLED ON AN ANGLED SKID STANDARD 3 GEAR BOLT PATTERN DECREASES STRAIN ON DRIVETRAIN WHEN MOUNTING TRANSMISSIONS ON ANGLED SKIDS

$4.99

Team Garage Hack Shim

5 Degree Shim Used for pitching the O.G. T-case, T-210, and 2.Low two hole bolt pattern.

5 Degree Shim Used for pitching the O.G. T-case, T-210, and 2.Low two hole bolt pattern.

$1.99

Darkside 3D Printing 1/10 Milk Crate Scale Acce...

Darkside 3D Printing 1/10 Milk Crate Scale Accessory

Darkside 3D Printing 1/10 Milk Crate Scale Accessory

$10.99

Hellfire Waterproofing and Customz Radio Wheel ...

Now from Hellfire Customs - Radio Wheel adapters. Designed and Engineered by Harley Designs.  The...

Now from Hellfire Customs - Radio Wheel adapters. Designed and Engineered by Harley Designs.  The radio wheel adapters will let you put a regular hex style wheel or VP SLW style wheel on your radio. This allows you to change the look and feel of you radio to best suit you. NOTE: This item is 3D printed. Due to the nature of 3D FDM printing this item may contain tiny visual blemishes and may require some trimming and detail painting for optimal visualappeal/fit. Similar to what you would expec...

$12.99

TeknoRC Pinion Gear (15t, MOD1, 5mm bore, M5 se...

The new line of Tekno RC M5 Pinion Gears stand out from the rest.  These are the ultimate pinions...

The new line of Tekno RC M5 Pinion Gears stand out from the rest.  These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application.  Sized from 11t all the way to 30t, you are sure to find the right gear ratio for racing or those insane speed runs.  The M5 set screw ensures that your gear will stay put during operation and ensure you won’t strip it out when you need to remove it.  The gears are CNC machined, lightened, then hardened for incredible durability.  A laser ...

$14.99

BowHouse RC TRX-4 Steering Servo Mount

The BowHouse RC Steering Servo Mount for the Traxxas TRX-4 replaces the stock servo mount and i...

The BowHouse RC Steering Servo Mount for the Traxxas TRX-4 replaces the stock servo mount and is designed to fit most standard sized servos (like the Holmes Hobbies SHV-500 servo shown in the pictures) without modification. This provides more secure mounting than the stock servo mount when upgrading to a more powerful, standard-sized servo. This version is printed in-house using carbon fiber-reinforced nylon.

$18.99

Hot Racing Traxxas TRX-4 Aluminum Motor Mount

This Traxxas TRX-4 Aluminum Motor Mount is an optional Aluminum Motor Mount for the TRX-4.Feature...

This Traxxas TRX-4 Aluminum Motor Mount is an optional Aluminum Motor Mount for the TRX-4.Features: CNC Aluminum construction Anodized black in color Replaces stock plastic mount Improves power transfer and lessens likelihood of motor over heating As the stock plastic 8 pinion gear attachment positions for 45T Spur gear Replace Traxxas TRA8290 Marking are laser engraved on motor mount

$8.99

Hot Racing AXR70FS148 Linear Rate Rock Crawler ...

Optional Linear rate Shock Spring Set for XR10 Rock Crawler ShockFEATURES:Soft Linear rate Spring...

Optional Linear rate Shock Spring Set for XR10 Rock Crawler ShockFEATURES:Soft Linear rate Springs, allow the optimum Max compression spring rate for each application. These Linear rate springs are soft to allow Max articulation, and Give it a low Low CG to resist rollover.YOU WILL RECEIVE:Soft Two 1.0 mm wire (Gold in color) (Rate 1.4)Ex- Soft Two 0.9mm wire (Silver in color).Ultra-soft Two 0.8mm wire (Black in color).REQUIREMENTS:The springs must be installed onto the built shock.SPECIFICAT...

$6.99

Kyosho W5198-60 55mm Rear Shock Spring (#75) (2...

Kyosho W5198-60 55mm Rear Shock Spring (#75) (2) Ultima RT5 / SC / DB

Kyosho W5198-60 55mm Rear Shock Spring (#75) (2) Ultima RT5 / SC / DB

$6.99

Kyosho W5199-75 55mm Front Shock Spring (#75) (...

Kyosho W5199-75 55mm Front Shock Spring (#75) (2) Ultima RT5 / SC / DB

Kyosho W5199-75 55mm Front Shock Spring (#75) (2) Ultima RT5 / SC / DB

$6.99

Kyosho W5198-02 58mm Shock Shaft (2) Ultima RT5...

Kyosho W5198-02 58mm Shock Shaft (2) Ultima RT5 / SC / DB / RB5 W5198-02 Shock Shaft (58mm/2pcs)

Kyosho W5198-02 58mm Shock Shaft (2) Ultima RT5 / SC / DB / RB5 W5198-02 Shock Shaft (58mm/2pcs)

$12.99

Dynamite Startup Tool Set: SCX24, AX24, 1/24

In The Box (1) .050' Hex Driver Wrench (1) 1.5mm Hex Driver Wrench (1) 4mm Nut Driver Wrenc...

In The Box (1) .050' Hex Driver Wrench (1) 1.5mm Hex Driver Wrench (1) 4mm Nut Driver Wrench (1) Stamped Ball Fork Tool With Multiple Open End Wrenches Including Sizes: 2, 3, 4, and 5mm (1) Carry Pouch Product Specifications Manufacturer # 605482764152 Tool Type Tool Set

$7.99

Furitek JST-PH 2 Pin to XT30 Battery Adapter Cable

Furitek JST-PH 2 Pin to XT30 Battery Adapter Cable FURITEK high quality XT30 to JST-PH conversion...

Furitek JST-PH 2 Pin to XT30 Battery Adapter Cable FURITEK high quality XT30 to JST-PH conversion cable is designed to support plug and play for lipo battery and Furitek esc. This high quality conversion cable helps eliminate the need for cutting and soldering cables and connectors. Application: for lipo batteries that have XT30 connectors to use with Furitek Tegu and Lizard ESCs. Note: NOT suitable for Furitek MOMENTUM esc

$17.99

Dlux Capra Sporty LCG Servo/Battery Mount

This is the servo mount we use on our Capra Sporty. It lowers the servo's position to keep the we...

This is the servo mount we use on our Capra Sporty. It lowers the servo's position to keep the weight lower and includes a battery mount. Battery mount designed for Turnigy nano-tech 450mAh 3S 65C Lipo. Other batteries of similar size will fit. Maximum battery size; 15.5 (W) X 60 (L) X 40mm (H). Each purchase includes: 1- Carbon Fiber Servo Mount Plate1- 3D Printed Battery Mount3- BHCS 6mm2- BHCS 8mm2- FHCS 8mm2- BHCS 25mm6- M3 Washers2- 4mm Aluminum Spacer1- Rod End Ball (for spacer)

$14.99

Dlux Scale Brake Rotors, (4)

Choose from three different sizes/types: Carbon Fiber: 1.5mm thick weigh 3.2g pair (1.6g ea)   Fi...

Choose from three different sizes/types: Carbon Fiber: 1.5mm thick weigh 3.2g pair (1.6g ea)   Fit SLW bolt pattern Sold as a set of 4

$17.99 $17.99 (2 variants)

Dlux UTB18 Portal Gears

Heat-treated portal gears for the mini Capra UTB18 Choose from overdrive or underdrive gears. Use...

Heat-treated portal gears for the mini Capra UTB18 Choose from overdrive or underdrive gears. Use both for ~32% overdrive total 16/25 = 10.38% OVERDRIVE recommended for front axle 13/28 = 21.63% UNDERDRIVE recommended for rear axle

$14.99

Exo Adjustable Panhard Mount

Fully Adjustable Panhard Mount Sliding Adjustment Front and Rear for Maximum Adjustability 4 Panh...

Fully Adjustable Panhard Mount Sliding Adjustment Front and Rear for Maximum Adjustability 4 Panhard Mounting Holes  CNC Machined 7075 Aluminum  Built in 3mm Spacer To Set The Panhard Bar Level to the Axle

$4.99

XT30 Male to Deans Female Battery Adapter

XT30 Male to Deans Female Battery Adapter

XT30 Male to Deans Female Battery Adapter

$16.99

AXIAL AR44 STRAIGHT AXLE SHAFT 5X106MM (2)

Axial AR44 5x106mm Straight Axle Shaft. Package includes two 5x106mm axle shafts.

Axial AR44 5x106mm Straight Axle Shaft. Package includes two 5x106mm axle shafts.

$9.99

Treal Traxxas TRX-4 Brass Extended Wheel Hub Ha...

Treal Hobby Traxxas TRX-4 Brass Extended Wheel Hub Hardware. This optional set is intended for th...

Treal Hobby Traxxas TRX-4 Brass Extended Wheel Hub Hardware. This optional set is intended for the Traxxas TRX-4 platforms equipped with 15mm brass extended wheel hubs. Includes: (8) Barrel nuts (8) Hub Pins (8) Washer-1 (8) Washer-2

$15.99

DS Racing Drift Element 6 Spoke Drift Wheels (G...

The DS Racing Drift Element 6 Spoke Drift Wheels are a great option to add that custom look to yo...

The DS Racing Drift Element 6 Spoke Drift Wheels are a great option to add that custom look to your RC drift car. These wheels feature an adjustable offset allowing you to have a factory, tucked or even stanced look. Each wheel is broken down into five pieces: Inner wheel, Outer wheel, Wheel Face, Inner rivet ring and Outer rivet ring. DS Racing has made these components available in multiple color and style options allowing you to select the wheels that will best match your build.Assembly NO...

$12.99

DS Racing Drift Element 6 Spoke Drift Wheels (T...

The DS Racing Drift Element 6 Spoke Drift Wheels are a great option to add that custom look to yo...

The DS Racing Drift Element 6 Spoke Drift Wheels are a great option to add that custom look to your RC drift car. These wheels feature an adjustable offset allowing you to have a factory, tucked or even stanced look. Each wheel is broken down into five pieces: Inner wheel, Outer wheel, Wheel Face, Inner rivet ring and Outer rivet ring. DS Racing has made these components available in multiple color and style options allowing you to select the wheels that will best match your build.Assembly NO...