$20 & Under

PLAYGROUND ENTRY FEE

Truck Rental Fee

TRUCK RENTALS !!!! We have Radio Control trucks for people to come in and rent! We have fleet of ...

TRUCK RENTALS !!!! We have Radio Control trucks for people to come in and rent! We have fleet of trucks available for rent ranging from beginner to expert level. This is the perfect thing to do if you are interested in purchasing your own RC Car but want to try out driving first, or just want to try out one of the newest models before you buy it. It is also fun to bring a good group of friends and drive together!  Cost is $19.99 to $24.99 for most rental trucks. Each rental car includes batte...

SuperShafty "CP43" Custom Axle System

PRE-ORDER OPEN - Estimated Delivery Early June SuperShafty "CP43" Custom Axle System Key Feature...

PRE-ORDER OPEN - Estimated Delivery Early June SuperShafty "CP43" Custom Axle System Key Features: One Piece construction Machined from 7075 Aluminum Increased Caster Angle to 20° for improved steering without side effects of leaning them too far back. (Most Stock is 8°) Externally Limited to 50° of side to side steering, but easily modified for more should you desire. (5° over stock Capra/10.3 axles) Ability to run 3 link with Panhard as a drop in replacement for a 10.3 axle. OR Run 4 link...

ALL NEW - "S4" SuperShafty Driveshafts - *Order...

ALL NEW - "S4" SuperShafty Driveshafts Order By Measurement To Order by Truck Specific Kits, Use ...

ALL NEW - "S4" SuperShafty Driveshafts Order By Measurement To Order by Truck Specific Kits, Use the other Listings.  PRODUCT DESCRIPTION: SuperShafty has been developing this new style shaft for a long time, and we finally think we now have a product worthy of putting out there for you guys. We took engineering bits and pieces from other shafts on the market that we liked, and combined them all into one package, so you get the best of everything in one without compromises.  Ultra-stro...

Grundish Customs "Guru Hook" Land anchor

THE OFFICIAL LAND ANCHOR OF THE SUPERSHAFTY FALL CRAWL!!!!   All new version 4 of the Guru Hoo...

THE OFFICIAL LAND ANCHOR OF THE SUPERSHAFTY FALL CRAWL!!!!   All new version 4 of the Guru Hook Now made of lazer cut 105 stainless and Tig welded. The "Guru Hook" is brought to you by GrundishCustoms. It's creation was the result of the inadequacies of your typical "shovel " style recovery hook. It is designed to stay upright even when tension is lost on the winch line as well as providing a better "bite" in everything from rocks to loose dirt. The unique design can hook to most anythi...

2/12/2022 Key City Crawling Competition

1 Class - $25 2 Classes - $45 3 Classes - $55 Kids - Under 12 - $0.00 with paid adult.

1 Class - $25 2 Classes - $45 3 Classes - $55 Kids - Under 12 - $0.00 with paid adult.

3/6/2022 Key City Crawling Competition

1 Class - $25 2 Classes - $45 3 Classes - $55 Kids - Under 12 - $0.00 with paid adult.

1 Class - $25 2 Classes - $45 3 Classes - $55 Kids - Under 12 - $0.00 with paid adult.

5/7/2022 Key City Crawling Competition - Sprin...

1 Class - $25 2 Classes - $45 3 Classes - $55 Kids - Under 12 - $0.00 with paid adult.

1 Class - $25 2 Classes - $45 3 Classes - $55 Kids - Under 12 - $0.00 with paid adult.

Vanquish Clamping Servo Horn 25T 20mm-Gray

The Vanquish Aluminum 20mm Clamping Servo Horn is machined from high quality aluminum material an...

The Vanquish Aluminum 20mm Clamping Servo Horn is machined from high quality aluminum material and features a unique clamping system that keeps the splines more engaged on the servo output.Features: 25 tooth servo spline is compatible with ProTek R/C, Savox, Orion, Futaba and more 20mm from center of servo output to center of outward most hole Milled from high quality aluminum Unique clamping style keeps splines more engaged on the servo output NOTE: Check your servo manufacturers specs to...

3/26/2022 Key City Crawling Competition - Spri...

1 Class - $25 2 Classes - $45 3 Classes - $55 Kids - Under 12 - $0.00 with paid adult.

1 Class - $25 2 Classes - $45 3 Classes - $55 Kids - Under 12 - $0.00 with paid adult.

KCH SHIRT

Vanquish Clamping Servo Horn 25T 24mm-Gray

The Vanquish Aluminum 24mm Clamping Servo Horn is machined from high quality aluminum material an...

The Vanquish Aluminum 24mm Clamping Servo Horn is machined from high quality aluminum material and features a unique clamping system that keeps the splines more engaged on the servo output.Features: 25T (25 tooth servo spline) 24mm from center of servo output to center of outward most hole Milled from high quality aluminum Unique clamping style keeps splines more engaged on the servo output NOTE: Check your servo manufacturers specs to find what servo spline you need.

4/24/2022 Key City Crawling Competition - Spri...

1 Class - $25 2 Classes - $45 3 Classes - $55 Kids - Under 12 - $0.00 with paid adult.

1 Class - $25 2 Classes - $45 3 Classes - $55 Kids - Under 12 - $0.00 with paid adult.

SHIFT RCS Rugged Horn 20mm

7075 aluminum servo horn  20mm long  25t 

7075 aluminum servo horn  20mm long  25t 

Axial 12mm Hex Set (4)

This is a replacement Axial 12mm Hex Set, intended for use with the Capra 1.9 Unlimited Trail Bug...

This is a replacement Axial 12mm Hex Set, intended for use with the Capra 1.9 Unlimited Trail Buggy 1/10 Rock Crawler Kit.

MIP HD Driveline Individual Parts

MIP HD Driveline Individual Parts MIP Spline Center HD Driveline Kit replaces stock plastic drive...

MIP HD Driveline Individual Parts MIP Spline Center HD Driveline Kit replaces stock plastic drive shafts with a high quality drive shaft kit that requires little to no vehicle modification to install. PRODUCT DESCRIPTION: EACH PRODUCT IN THIS LISTING IS SOLD INDIVIDUALLY.  Options:   HUBS: 5mm Standard Hub 5mm Short Hub 6mm Short Hub FEMALE SHAFTS 35mm Standard 25mm Short MALE SHAFTS 35mm 50mm 65mm 75mm 90mm 100mm 110mm  

Shift RCS Sancho Horn 27mm length

Designed for crawler applications that need that extra length  27mm outside hole 23.5 mm inside h...

Designed for crawler applications that need that extra length  27mm outside hole 23.5 mm inside hole  m2.5 clamping screw 7075 aluminum 

Black Aluminum Fix Link Steering Rod: SCX24

Features: The linkage set are much tighter than the stock steering linkage 6061 aluminum links,...

Features: The linkage set are much tighter than the stock steering linkage 6061 aluminum links, Black anodized Steel pivot balls Replaces plastic Axial AXI204000 steering link Includes: (1) tie rod with Steel Pivot Ball (1) drag link with Steel Pivot Ball (4) cap head cap screw

Robinson Racing Absolute 32P Hardened Pinion Ge...

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited fo...

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited for use with Robinson steel spur gears. They feature an 1/8 inch bore, a 32 pitch tooth profile, with the tooth number stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one gear and one 5-40 set screw. 

Tattu 11.1V 75C 3S 450mAh Lipo Battery Pack Wit...

Features: - Remarkable stacking technology enables single-cell capacities of 450mAh.- High discha...

Features: - Remarkable stacking technology enables single-cell capacities of 450mAh.- High discharge performance and high energy density.- Superior Japan and Korea Lithium Polymer raw materials. Specifications: - Minimum Capacity: 450mAh- Configuration: 3S1P / 11.1V / 3 Cells- Discharge Rate: 75C- Max Burst discharge Rate: 150C- Net Weight(±20g): 42g- Dimensions: 45mm Length x 24mm Width x 21mm Height- Charge Plug: JST-XHR-4P- Discharge Plug: XT-30

TEAM GARAGE HACK TGH ROD END SPEED WRENCH

TEAM GARAGE HACK TGH ROD END SPEED WRENCH Made in the U.S.A. 1018 Steel Quick Chuck Designed sp...

TEAM GARAGE HACK TGH ROD END SPEED WRENCH Made in the U.S.A. 1018 Steel Quick Chuck Designed specifically for REVO & JATO Style 4mm rod ends used on most aftermarket link kits Use it with THESE Products !! 

Dowel Pins

Everyone loses those dowel pins. So grab some spares for the toolbox. SuperShafty only stocks Hig...

Everyone loses those dowel pins. So grab some spares for the toolbox. SuperShafty only stocks High Quality Alloy pins. NOT the weaker Stainless. Available in the 3 most common RC sizes Sold in set of (6) Pins M1.5 x 8mm (For top gears) M2.0 x 10mm (For SuperShafty top shaft and most 12mm Hex) M2.5 x 12mm (Stub shafts)

Vanquish Incision Capra Rear Shafts

The Vanquish Axial Capra Rear Axle Shafts are a chromoly rear axle shaft option for the Axial Cap...

The Vanquish Axial Capra Rear Axle Shafts are a chromoly rear axle shaft option for the Axial Capra Currie F9 Portal Axles. Package includes two axles and bearings.  Features: Adds another bearing support on rear upper portal gear for increased strength and reliability Made from high quality chromoly steel Drop in upgrade for stock Axial rear axle shafts (AXI232010)

SLW 600 WHEEL HUB

Vanquish Products Aluminum SLW Wheel Hubs Compatable with SLW, OMF, KMC, Method, and SSZ style w...

Vanquish Products Aluminum SLW Wheel Hubs Compatable with SLW, OMF, KMC, Method, and SSZ style wheels Sold in pairs Increments of 1/8 of an inch Uses six 4-40 screws to attach hub to wheels Hardware not included Patent No. 8,167,380 B2

Bob Smith Industries INSTA-SET Foam Safe Accele...

This is a two fluid ounce Pump Spray bottle of Bob Smith Industries INSTA-SET™ Foam Safe CA Accel...

This is a two fluid ounce Pump Spray bottle of Bob Smith Industries INSTA-SET™ Foam Safe CA Accelerator. INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a ...

Currie F9 Portal Axle Housing, 3rd member Front...

This is a replacement Axial Currie F9 Portal Axle Housing & Front 3rd Member, intended for us...

This is a replacement Axial Currie F9 Portal Axle Housing & Front 3rd Member, intended for use with the Capra 1.9 Unlimited Trail Buggy Kit.

Dynamite Machined Hex Driver Metric Set (Red)

Features: Includes 1.5mm, 2mm, and 2.5mm Hex Drivers Hardened Steel Replaceable Tips Comfortable...

Features: Includes 1.5mm, 2mm, and 2.5mm Hex Drivers Hardened Steel Replaceable Tips Comfortable Knurled Aluminum Handle

Bob Smith Industries INSTA-CURE+ POCKET Gap-FIl...

This is a 3/4 ounce bottle of Bob Smith Industries INSTA-CURE+™ Gap Filling Pocket CA Glue with a...

This is a 3/4 ounce bottle of Bob Smith Industries INSTA-CURE+™ Gap Filling Pocket CA Glue with a Pin in Cap Lid. INSTA-CURE+™ Gap Filling CA Glue. INSTA-CURE+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. ...

CASTLE LINK V3 USB PROGRAMMING KIT

Program your Castle brushless ESCs and accessories on your Windows® PC with the Castle Link USB...

Program your Castle brushless ESCs and accessories on your Windows® PC with the Castle Link USB programming kit. Set up of programmable options with point and click ease View your current program settings Air users can customize values for low-voltage cutoff, prop brake strength, governor gain and more Surface users can customize values for low-voltage cutoff, drag brake, torque limiting and more Download new software updates as they become available Simple programming interface featuring...

Tattu 1300mAh 3S 75C Lipo Battery Pack With XT6...

Features: - Stable automatic stacking technology enables single-cell capacities of 1300mAh.- The ...

Features: - Stable automatic stacking technology enables single-cell capacities of 1300mAh.- The most strict single cell capacity, voltage, resistance, discharge curve matching process.- Superior Japan and Korea Lithium Polymer raw materials. Specifications: - Minimum Capacity: 1300mAh- Configuration: 3S1P / 11.1V / 3 Cells- Discharge Rate: 75C- Max Burst discharge Rate: 150C- Net Weight(±20g): 122g- Dimensions: 72mm Length x 36mm Width x 22mm Height- Charge Plug: JST-XHR- Discharge Plug: XT-60

Robinson Racing Absolute 32P Hardened Pinion Ge...

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited fo...

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited for use with Robinson steel spur gears. They feature an 1/8 inch bore, a 32 pitch tooth profile, with the tooth number stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one gear and one 5-40 set screw.

Robinson Racing Absolute 32P Hardened Pinion Ge...

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited fo...

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited for use with Robinson steel spur gears. They feature an 1/8 inch bore, a 32 pitch tooth profile, with the tooth number stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one gear and one 5-40 set screw. 

SuperShafty "SS60" Bombproof Axle Housings & Kn...

SuperShafty "SS60" Bombproof Axle Housings & Knuckles & Chubs. YES!!!!!! The CLAMPING CHU...

SuperShafty "SS60" Bombproof Axle Housings & Knuckles & Chubs. YES!!!!!! The CLAMPING CHUBS AND KNUCKLES are available on this page - click the drop down box.   Features: One Piece construction Machined from 7075 Aluminum Larger than stock bearings Ring Gear able to be flipped side to side. Axial AR60 Dimensions Drop in compatibility with stock and Stock Upgrade parts. Ability to run DLUX FBA 7mm Shafts - Drop in without modifications  These carry a 1 Year Bombproof guarantee against...