$20 & Under

Sea Squirrel SLW Scale Rotors - 1.9" Directional

SLW Scale Rotors - 1.9" Directional Scale Directional Rotors snap over the SLW style hubs and can...

SLW Scale Rotors - 1.9" Directional Scale Directional Rotors snap over the SLW style hubs and can be installed on MOST 1.9" and 2.2" SLW wheels. These are small for 2.2 wheels. See our Sea Squirrel SLW Scale Rotors - 2.2" Directional Recon G6 Certified Fits: Vanquish Products (VP), Lockedup RC, Treal Hobby, Injora (China) Hubs. Does not fit SSD Hubs. May fit other hubs but not tested. Adds approximately 1mm to your track width. Use existing hardware to mount. Includes: 2 left & 2 right ro...

DLUX Offset Shock Cap with Hardware (Pair)

Offset Shock Cap for the Dlux, Dravtech, or the Traxxas Big Bore (2660, 2661 and 2662). It allows...

Offset Shock Cap for the Dlux, Dravtech, or the Traxxas Big Bore (2660, 2661 and 2662). It allows you to have the same shock travel but with lower total length of the shock.   Modifications may be required to big bore shocks or O-rings between the bladder and cap so it does not leak. ***Please note that this is only the Shock Cap and not a complete shock. *** Reduces the length of your ultra-short Dlux shocks by ~11mm Reduces the length of all other Dlux shocks by ~15mm when used with shor...

Vanquish Products Aluminum Axle Servo Mount for...

Vanquish Products Aluminum Axle Servo Mount for AR60 Housings Also Fits SuperShafty SS60 Axles

Vanquish Products Aluminum Axle Servo Mount for AR60 Housings Also Fits SuperShafty SS60 Axles

Shift RCS Nano M Horn

7075 aluminum micro servo horn  25 micro spline  19.6mm long 

7075 aluminum micro servo horn  25 micro spline  19.6mm long 

Black Aluminum Fix Link Steering Rod: SCX24

Features: The linkage set are much tighter than the stock steering linkage 6061 aluminum links,...

Features: The linkage set are much tighter than the stock steering linkage 6061 aluminum links, Black anodized Steel pivot balls Replaces plastic Axial AXI204000 steering link Includes: (1) tie rod with Steel Pivot Ball (1) drag link with Steel Pivot Ball (4) cap head cap screw

TEAM GARAGE HACK TGH ROD END SPEED WRENCH

TEAM GARAGE HACK TGH ROD END SPEED WRENCH Made in the U.S.A. 1018 Steel Quick Chuck Designed sp...

TEAM GARAGE HACK TGH ROD END SPEED WRENCH Made in the U.S.A. 1018 Steel Quick Chuck Designed specifically for REVO & JATO Style 4mm rod ends used on most aftermarket link kits

AXIAL 48P PORTAL GEARS, OVERDRIVE 25T/16T: UTB1...

AXIAL 48P PORTAL GEARS, OVERDRIVE 25T/16T: UTB18 (2)

AXIAL 48P PORTAL GEARS, OVERDRIVE 25T/16T: UTB18 (2)

FPVKing Lipo Checker - Digital Battery Controll...

Lipo Checker - Digital Battery Controller Tester Voltage Tester Use for LiPo LiFe Li-ion NiMH Ni...

Lipo Checker - Digital Battery Controller Tester Voltage Tester Use for LiPo LiFe Li-ion NiMH Nicd battery Cell Number: NiCd / NiMH (4 - 7 Cells), Lithium Type (2 - 7 Cells) Display Mode: Battery cell voltages, Total voltages, Lowest cell voltage, Highest cell voltage, Voltage gap between highest cell voltage and lowest cell voltage, Remaining battery capacity(%) Check the batteries, simple and convenient to read your cell voltage

MIP CVD Rebuild Kit X-Duty

X-DUTY (Standard MIP Shafts, Not the new scale ones) Great to have a spare set for that "Just In ...

X-DUTY (Standard MIP Shafts, Not the new scale ones) Great to have a spare set for that "Just In Case" scenarioThis rebuild kit  fits all MIP X-Duty CVD kits perfectly! Half Pack - $9.99 - Enough parts to rebuild One Joint Standard Pack - $14.99 - Enough parts to rebuild One complete Driveshaft Twin Pack - $24.99 - Enough parts to rebuild Two complete Driveshafts Note: Does not include screw pins. Screw pins can be purchased here.

Palm Beach Bots Palm Power 3S 180mAh 45C Lipo B...

Palm Power 3S 180mAh battery with a high 45C discharge rate and JST connector and balance lead fo...

Palm Power 3S 180mAh battery with a high 45C discharge rate and JST connector and balance lead for charging.  Great for those high voltage 150g bots or for running multiple batteries in a larger bot to provide different voltage to weapon/drive.   Specifications: Capacity: 180mAh Voltage: 3 Cell / 11.1V Discharge: 45C Weight: 15g Dimensions: 30x15x21mm Discharge plug: JST Note: If using on a lifter with a servo a Voltage Regulator is needed to step down the voltage to the servo. 

Axial Capra 1.9 Portal Stub Axle (2)

This is a replacement set of Axial Capra 1.9 Portal Stub Axles, intended for use with the Capra 1...

This is a replacement set of Axial Capra 1.9 Portal Stub Axles, intended for use with the Capra 1.9 Unlimited Trail Buggy Kit.

Robinson Racing Absolute 32P Hardened Pinion Ge...

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited fo...

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited for use with Robinson steel spur gears. They feature an 1/8 inch bore, a 32 pitch tooth profile, with the tooth number stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one gear and one 5-40 set screw

VANQUISH SLW 350 WHEEL HUB RAW SILVER

Vanquish Products Aluminum SLW Wheel Hubs 350 Silver Raw Compatible with SLW, OMF, KMC, Method, ...

Vanquish Products Aluminum SLW Wheel Hubs 350 Silver Raw Compatible with SLW, OMF, KMC, Method, and SSZ style wheels Sold in pairs Increments of 1/8 of an inch Uses six 4-40 screws to attach hub to wheels Hardware not included Patent No. 8,167,380 B2

Traxxas Body Paint Black 5 ozs

Body paint, ProGraphix®, Black (5oz) ­ ProGraphix RC Paint Features ­ Huge choice of c...

Body paint, ProGraphix®, Black (5oz) ­ ProGraphix RC Paint Features ­ Huge choice of custom colors Can size: 5 oz Ultra-fine spray Fast drying Clog-resistant comfort nozzle Nitro fuel resistant

Dynamite Machined Hex Driver Metric Set (Red)

Features: Includes 1.5mm, 2mm, and 2.5mm Hex Drivers Hardened Steel Replaceable Tips Comfortable...

Features: Includes 1.5mm, 2mm, and 2.5mm Hex Drivers Hardened Steel Replaceable Tips Comfortable Knurled Aluminum Handle

Mini Carabiner Hook: Gun Black 32mm

Mini Carabiner Hook: Gun Black 32mm  Great for hooking to winch sticks!

Mini Carabiner Hook: Gun Black 32mm  Great for hooking to winch sticks!

Palm Beach Bots Palm Power 2S 450mAh 45C Lipo B...

Palm Power 2S 450mAh battery with a high 45C discharge rate and JST connector and balance lead fo...

Palm Power 2S 450mAh battery with a high 45C discharge rate and JST connector and balance lead for charging.   Popular Applications: Adding capacity to your Ant (1lb) bot.    Specifications: Capacity: 450mAh Voltage: 2 Cell / 7.4V Discharge: 45C Weight: 18g Dimensions: 36x17x17mm Discharge plug: JST

HOLMES HOBBIES BRUSHED MOTOR LEADS

A pair of motor leads with high current 4mm male bullet plugs. Handy for brushed motors. 13ga hig...

A pair of motor leads with high current 4mm male bullet plugs. Handy for brushed motors. 13ga high strand silicon coated wire 6" long insulated.

Powerhobby 25T Aluminum Clamping Servo Horn Gun...

Features: 25T (25 tooth servo spline)* 24mm from center of servo output to center of outward mos...

Features: 25T (25 tooth servo spline)* 24mm from center of servo output to center of outward most hole Milled from high quality aluminum Unique clamping style keeps splines more engaged on the servo output

Robinson Racing Absolute 32P Hardened Pinion Ge...

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited fo...

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited for use with Robinson steel spur gears. They feature an 1/8 inch bore, a 32 pitch tooth profile, with the tooth number stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one gear and one 5-40 set screw.

SuperShafty Team Driver Banners

FREE to SuperShafty team drivers. You pay actual shipping only.  PICK YOUR COLOR FROM THE DROP DO...

FREE to SuperShafty team drivers. You pay actual shipping only.  PICK YOUR COLOR FROM THE DROP DOWN BOX   ****** If you are not a SuperShafty team driver, you can not purchase this item.

Key City Hobby - Racing Simulator time

We have a state of the art, Racing simulator setup in the shop now. Rent some time on it here. $2...

We have a state of the art, Racing simulator setup in the shop now. Rent some time on it here. $20 for 1 hour. $50 for 3 hours. (3 hours can not be used consecutively if there are other people waiting)

Dlux 1/16", 2mm, 1/8", 1/4" Hub Spacers

Sold in sets of 2 which is enough for 2 wheels. Works with 2.2 or 1.9, SLW or DH hubs. Great for ...

Sold in sets of 2 which is enough for 2 wheels. Works with 2.2 or 1.9, SLW or DH hubs. Great for cars that need extra width such as the LCC or Bully or for adjusting the width less than the next hub size will give. For Brass: Two of these weigh approximately 22.5g(0.8oz).

Powerhobby Axial SCX24 Adjustable Aluminum Serv...

Powerhobby Axial SCX24 Adjustable Aluminum Servo Mount for Larger Servo Fits all scx24 models and...

Powerhobby Axial SCX24 Adjustable Aluminum Servo Mount for Larger Servo Fits all scx24 models and almost all aftermarket servos such as Powerhobby 59MG, Mofo RC, NSDRC, Reefs, Emax, and Savox, etc... Weight: 6g

SuperShafty Exclusive MIP X-Duty CVD™ Bone

Exclusive MIP X-Duty CVD™ Bone Included - (1) x  3.40" Male driveshaft bone   INFO: For the WRA...

Exclusive MIP X-Duty CVD™ Bone Included - (1) x  3.40" Male driveshaft bone   INFO: For the WRAITH and other Long Wheel base rigsMeant to get full contact with your MIP Spline Driveshafts.These Exclusive MIP Male Bones give you an extra 3/4" more Contactthen the Standard MIP Male Bone

SuperShafty Scale Banner

Check out these awesome scale banners for your scale garage. Approximately 3.5"x7" Available in ...

Check out these awesome scale banners for your scale garage. Approximately 3.5"x7" Available in 5 colors now.  

Treal Brass Extended Hex Wheel Hubs for SCX24 U...

Treal Brass Extended Hex Wheel Hubs for SCX24 Upgrades +5mm Features: -Specially designed for AXI...

Treal Brass Extended Hex Wheel Hubs for SCX24 Upgrades +5mm Features: -Specially designed for AXIAL SCX24 AXI00002 AXI00001 AXI90081 1/24 RC Crawler Car-Extending the truck width(+5mm)for a wider stance and greater control and stability-Weight 2.4g/pc,perfect fitting the wheels-7mm hex matching stock wheel hub-CNC machined solid brass billet ensures anti rust, sturdy, durable, wear resistant high performance You will receive: Brass Hex Wheel Hubs (4)pcsPins (4)pcsNuts (4)pcsWashers (4)pcs  T...

Holmes Hobbies TrailMaster Sport 550 21t

FEATURES: Zero timing, universal installation and rotation direction 1/8th inch shaft diameter 3...

FEATURES: Zero timing, universal installation and rotation direction 1/8th inch shaft diameter 36mm OD x 57mm length (not including shaft) 217g weight m3 mount holes, 25mm spacing, "540" standard ball bearing on output bronze bushing on end bell High strength Y45 Ferrite magnets

Shock Lube, Green Slime

This is Team Associated's Factory Team Green Slime shock O-ring grease. This is a specially formu...

This is Team Associated's Factory Team Green Slime shock O-ring grease. This is a specially formulated grease that provides a better seal between the shock shafts and the shock O-rings to help prevent shock oil leaking from the shocks, as well as provide smoother shock action.

CORRUPT CARBON WORKS FORGED CARBON FIBER ROTORS

FORGED CARBON FIBER ROTORS!!! ALL ROTORS ARE 1MM THICK AND FIT SLW PATTERN. SOME SANDING AROUND T...

FORGED CARBON FIBER ROTORS!!! ALL ROTORS ARE 1MM THICK AND FIT SLW PATTERN. SOME SANDING AROUND THE OUTSIDE MIGHT BE NEEDED FOR SOME MANUFACTURES OF WHEELS. EACH PURCHASE COMES WITH (4 ROTORS) AMOUNT OF COLOR IN ROTOR IS RANDOM.

Treal Axial SCX24 Brass Extended Wheel Hubs (4p...

Product description Treal Axial SCX24 Brass Extended Wheel Hubs (4p) +5mm Axle Counter Weight 12...

Product description Treal Axial SCX24 Brass Extended Wheel Hubs (4p) +5mm Axle Counter Weight 12g/pc -Black 1. Material: Brass2. Weight: 12g/pc3. Fits in: Axial SCX244. Dimension: Lengthened 5mm than stock wheel hubs5. Package: 4pcs brass wheel hubs +5mm and hardware

Axial AR44 6-Bolt Differential Locker

This is a replacement Axial AR44 6-Bolt Differential Locker, intended for use with the Capra 1.9 ...

This is a replacement Axial AR44 6-Bolt Differential Locker, intended for use with the Capra 1.9 Unlimited Trail Buggy 1/10 Rock Crawler.

Robinson Racing Steel 48P Pinion Gear (3.17mm B...

These Robinson Racing Products 48 Pitch Pinion Gears are precision cut alloy steel gears that fea...

These Robinson Racing Products 48 Pitch Pinion Gears are precision cut alloy steel gears that feature a hard nickel coating for durability. The pinions have an 1/8" bore, are stamped with the tooth number for easy identification and include one 5-40 set screw. These gears are available in a variety of tooth count options to fine tune the torque and top speed of your vehicle.