Exo Belay ESC 1800KV w/ Programmer
Our Belay Electronic Speed Controller is a high powered, silent ESC for non-sensored brushless and outrunner motors. All units will come programmed with a base tune set to the KV to match the motor of your choosing.
Providing a hardware rating of 70 Amps of continuous and 110 Amps of burst, the control and power is delivered smoothly throughout the entire throttle band. Tested on 4S direct power servos with no issues.
Rated up to 8S battery power. 4S Max recommended for Rock Crawlers. (Check manufacturer specifications on servo and motor operation voltage before running large voltage batteries.)
NOT WATERPROOF (Recommended to remove heat shrink and apply silicone conformal coating to ESC for wet conditions)
No BEC (recommended if running high amperage receiver powered servos)
Updated with a built in Heat Sink
Size: 43mm x 19mm x 17mm
Weight: 27g with wires
1 Year Manufacturer Warranty Covering everything except moisture damage and misuse
-USB Programmer and Heat Shrink
-1x JST Connectors
-1x Receiver Connector for High Power BEC
-4mm Bullet Motor Connectors on 4 inch wires.
-XT30 Battery Connector