Tool Kits

KCH 1/24 Scale Tool Set (4 pcs)

Key City Hobby 1/24 Scale Tool Set (4 pcs) 4.0 Box Driver 1.5 mm Hex Driver 1.3 mm Hex Driver 0....

Key City Hobby 1/24 Scale Tool Set (4 pcs) 4.0 Box Driver 1.5 mm Hex Driver 1.3 mm Hex Driver 0.05" Hex Driver

Dynamite Machined Hex Driver Metric Set (Red)

Features: Includes 1.5mm, 2mm, and 2.5mm Hex Drivers Hardened Steel Replaceable Tips Comfortable...

Features: Includes 1.5mm, 2mm, and 2.5mm Hex Drivers Hardened Steel Replaceable Tips Comfortable Knurled Aluminum Handle

Powerhobby Pro Series Magnetized Hex Tool Set M...

Features: Stylish lightweight aluminum handle design Color-coded collars on the handle Sure-grip...

Features: Stylish lightweight aluminum handle design Color-coded collars on the handle Sure-grip handle 22mm diameter handle 100mm handle length HSS Magnetized steel tips 90mm tip length Replacement hex tips are available Total length 190mm (handle + tip)

Vanquish Tools

Vanquish Tool Kits  Metric 4 piece Nut Driver Tool Set Includes: 4pc - Tool Handle with b...

Vanquish Tool Kits  Metric 4 piece Nut Driver Tool Set Includes: 4pc - Tool Handle with bearing supported color coded cap for each tool size 4pc - Ground tool steel hex driver tip (1x1.5mm, 1x2.0mm, 1x2.5mm, 1x3.0mm) 1pc - 2mm L-key tool for assembly Standard 3 piece Hex Driver Tool Set Includes: 3pc - Tool Handle with bearing supported color coded cap for each tool size 3pc - Ground tool steel hex driver tip (1x0.05in, 1x1/16in, 1x3/32in) 1pc - 2mm L-key tool for assembly Metri...

MIP Nut Driver Wrench 7.0mm

The MIP 7.0mm Metric Nut Driver was built to the same quality standards that have made MIP the go...

The MIP 7.0mm Metric Nut Driver was built to the same quality standards that have made MIP the go tool for hobbiests for over 30 years. MIP tools are found on pit tables and work benches around the world and are trusted by World Champions and hobbyists alike for their superior quality, longevity, and American construction.MIP nut drivers feature an all steel construct and have been nickel plated to perfection. The nickel plate process boosts the steel hardness level to a whopping 70 plus Rock...

Bob Smith Industries INSTA-CURE+ POCKET Gap-FIl...

This is a 3/4 ounce bottle of Bob Smith Industries INSTA-CURE+™ Gap Filling Pocket CA Glue with a...

This is a 3/4 ounce bottle of Bob Smith Industries INSTA-CURE+™ Gap Filling Pocket CA Glue with a Pin in Cap Lid. INSTA-CURE+™ Gap Filling CA Glue. INSTA-CURE+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. ...

Corrupt Carbon Works Screw Driver Handle (hex l...

This is an all aluminum handle with a hex locking end perfect for your MIP speed bits and other h...

This is an all aluminum handle with a hex locking end perfect for your MIP speed bits and other hex ended bits!!

Bob Smith Industries INSTA-SET Foam Safe Accele...

This is a two fluid ounce Pump Spray bottle of Bob Smith Industries INSTA-SET™ Foam Safe CA Accel...

This is a two fluid ounce Pump Spray bottle of Bob Smith Industries INSTA-SET™ Foam Safe CA Accelerator. INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a ...

Dynamite US Startup Tool Set

Features: Contains most every tool needed in order to maintain a vehicle Packaged in a zippered ...

Features: Contains most every tool needed in order to maintain a vehicle Packaged in a zippered tool pouch Compact, complete and affordable Includes: NUT DRIVERS: 3/16”, 1/4”, 5/16”, 11/32” and 3/8” HEX DRIVERS: .050”, 1/16”, 5/64” and 3/32” PHILLIPS: #0, #00 & #1 FLATBLADE: #2, #3 & #4 BOX WRENCH: 3/16”, 1/4”, 5/16” and 11/32”

Corrupt Carbon Works Shark Bite Lock Tite (Resi...

This is a Resin based Thread locker Holds like Red, Removes like blue. Also you can reuse the sam...

This is a Resin based Thread locker Holds like Red, Removes like blue. Also you can reuse the same thread locker on the bolt up to 3 times without adding more. This is made for all materials and works great with even plastic!!! NEW BOTTLES COMES WITH 10ML!!!

DUBRO Body Reamer & Scissors Set

Two essential tools for the shop are the Body Reamer & Scissors. Whether you are reaming hole...

Two essential tools for the shop are the Body Reamer & Scissors. Whether you are reaming holes for your body posts, antenna, or cutting a custom shape, you need quality equipment. 1 ea. / pkg.#2330 Set includes a curved tip scissors plus our super sharp body reamer.

Powerhobby Pro Series Nut Driver Tool Set 5mm 5...

Features: Stylish lightweight aluminum handle design Color-coded collars on the handle Sure-grip...

Features: Stylish lightweight aluminum handle design Color-coded collars on the handle Sure-grip handle 22mm diameter handle 100mm handle length 90mm tip length Total length 190mm (handle + tip)

Powerhobby RC Hex Driver 1/4" Tool Set Metric 1...

Powerhobby Hex Driver 1/4" Tool Set Metric 1.5, 2.0, 2.5mm with Handle Features: 1/4" drive stee...

Powerhobby Hex Driver 1/4" Tool Set Metric 1.5, 2.0, 2.5mm with Handle Features: 1/4" drive steel hex tips Tips can be used in a 1/4" drive power driver Aluminum Handle Specs: The length of the Tip is 3" Handle Length is 4.3" Includes: 1.5mm 1/4" Drive Hex Tip 2.0mm 1/4" Drive Hex Tip 2.5mm 1/4" Drive Hex Tip 1/4" Drive Handle

Bob Smith Industries INSTA-CURE+ Gap Filling CA...

This is a two ounce bottle of Bob Smith Industries INSTA-CURE+™ Gap Filling CA Glue. INSTA-CURE+™...

This is a two ounce bottle of Bob Smith Industries INSTA-CURE+™ Gap Filling CA Glue. INSTA-CURE+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin ...

Bob Smith Industries IC-2000 Black Rubber Tough...

Ic-2000 Black Rubber-Toughened CA Glue 1oz

Ic-2000 Black Rubber-Toughened CA Glue 1oz

Bob Smith Industries ULTRA-CURE Medium CA Tire ...

This is a one ounce bottle of Bob Smith Industries ULTRA-CURE Medium CA Tire Glue. ULTRA-CURE Tir...

This is a one ounce bottle of Bob Smith Industries ULTRA-CURE Medium CA Tire Glue. ULTRA-CURE Tire Glue has been rated by many racers as the best CA for use on tires, and has a claimed to dry in 5-10 seconds. Ultra-Cure has a thickness in-between BSI’s Insta-Cure and Insta-Cure+ blends, with a viscosity of 80 cps. Package includes one bottle of ULTRA-CURE Medium-Thin CA glue.

Powerhobby Nut Driver Bit 7.0mm 1/4" Steel Driv...

Powerhobby Nut Driver Bit 7.0mm Features: 1/4" drive steel hex tips Precision size Good for both...

Powerhobby Nut Driver Bit 7.0mm Features: 1/4" drive steel hex tips Precision size Good for both power tool and hand tool Size: 75mm long with 1/4″ Drive Hex

Bob Smith Industries INSTA-CURE Super Thin CA (...

Insta-Cure Super Thin CA Glue 2oz

Insta-Cure Super Thin CA Glue 2oz

Bob Smith Industries MAXI-CURE POCKET Extra Thi...

This is a 3/4 ounce bottle of Bob Smith Industries MAXI-CURE Extra Thick Pocket CA Glue with a Pi...

This is a 3/4 ounce bottle of Bob Smith Industries MAXI-CURE Extra Thick Pocket CA Glue with a Pin in Cap Lid. MAXI-CURE™ extra thick CA is the best CA for most plastics, including GE’s Lexan. MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic.MAXI-CURE™ bonds fiberglass, hardwood,...

Bob Smith Industries UN-CURE CA Debonder (1oz)

This is a one ounce bottle of Bob Smith Industries UN-CURE™ CA Debonder. UN-CURE™ Debonder will s...

This is a one ounce bottle of Bob Smith Industries UN-CURE™ CA Debonder. UN-CURE™ Debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off softened CA, then wash off with soap and water.

Vanquish Rubber Parts Tray

Vanquish Products rubber parts tray. The perfect accessory to organize your workbench or take wit...

Vanquish Products rubber parts tray. The perfect accessory to organize your workbench or take with you on your next adventure. The high friction rubber material allows the tray to be used on a variety of surfaces and keep your hardware and parts safely organized.Specifications:Length: 235mmWidth: 125mmHeight: 10mmPocket Depth: 7mmThickness: 3mm

Sea Squirrel Rod End Tool - Traxxas & Incision

Rod End Tool - Traxxas & Incision Use this Rod End Tool - Traxxas & Incision to aid in th...

Rod End Tool - Traxxas & Incision Use this Rod End Tool - Traxxas & Incision to aid in the installation of your rod ends. Works with the balls installed or without (standard Traxxas and Incision width balls).  Features comfortable handle to manually install the rod ends and 1/4" hex to be used with any drill or cordless driver.

Bob Smith Industries Plastic-Cure Brush-On Odor...

This is a 1/2oz bottle of Plastic-Cure, a gap-filling formulation of CA that works best on plasti...

This is a 1/2oz bottle of Plastic-Cure, a gap-filling formulation of CA that works best on plastics. It is packaged in a bottle with a brush built into its cap, which in many cases is an easier way to apply the CA. As long as brush is put back into the bottle after use, the bristles of the brush will not harden. Care must be taken, however, not to introduce foreign material into the bottle. The brush should not be used, for example, to apply CA to wood that has been freshly sanded. Plastic-Cu...

Bob Smith Industries SUPER-GOLD Thin Odorless F...

This is a half ounce bottle of Bob Smith Industries SUPER-GOLD™ Odorless, Foam Safe CA Glue. SUPE...

This is a half ounce bottle of Bob Smith Industries SUPER-GOLD™ Odorless, Foam Safe CA Glue. SUPER-GOLD™ and SUPER-GOLD+™ are BSI's odorless INSTA-CURE CAs. They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for ...

Corrupt Carbon Works Universal Turnbuckle Wrench

Powder coated universal turnbuckle wrench. This tool should cover whatever you need from slipper ...

Powder coated universal turnbuckle wrench. This tool should cover whatever you need from slipper clutch nut to just about any turnbuckle size! Great tool to keep in your pocket on race days and tuning days for sure!

MIP Nut Driver Wrench 4.0mm

The MIP 4.0mm Metric Nut Driver was built to the same quality standards that have made MIP the go...

The MIP 4.0mm Metric Nut Driver was built to the same quality standards that have made MIP the go tool for hobbiests for over 30 years. MIP tools are found on pit tables and work benches around the world and are trusted by World Champions and hobbyists alike for their superior quality, longevity, and American construction.MIP nut drivers feature an all steel construct and have been nickel plated to perfection. The nickel plate process boosts the steel hardness level to a whopping 70 plus Rock...

Bob Smith Industries MAXI-CURE Extra Thick CA (...

This is a two ounce bottle of Bob Smith Industries MAXI-CURE™ extra thick CA glue. MAXI-CURE™ ext...

This is a two ounce bottle of Bob Smith Industries MAXI-CURE™ extra thick CA glue. MAXI-CURE™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic.MAXI-CURE™ bonds fiberglass, hardwood, metal and rubber better than...

Bob Smith Industries Pocket CA Extender Tips (6)

This is a bag of six Bob Smith Industries Pocket CA Bottle Extender Tips. These work best with BS...

This is a bag of six Bob Smith Industries Pocket CA Bottle Extender Tips. These work best with BSI products.

VANQUISH BENCHTOP WORK MAT

Specifications: Length: 950mm Width: 600mm Colors: Black, White, Blue

Specifications: Length: 950mm Width: 600mm Colors: Black, White, Blue

MIP Hex Driver Wrench 2.0mm

Package Includes:  1 x 2.0 mm Hand Wrench w/ label and wrap Tool Makeup: Tool hex cut with dia...

Package Includes:  1 x 2.0 mm Hand Wrench w/ label and wrap Tool Makeup: Tool hex cut with diamond wheel for ultimate precision  Tool shank CNC ground from US Grade tool steel drill blanks  Tight tolerances held within 20 Microns which is .02 mm and moreover .0008 in. ! To put that into perspective that's like taking a human hair and dividing it by 4 !  Super Comfy to the hand Polycarbonate Handles that are resilient to hot and cold weather so wont harm your hands in poor weather condition...

Dynamite 5 Piece Metric Nut Driver Set

Features: Includes 4mm, 5mm, 5.5mm, 7mm and 8mm sizes Ergonomic rubber-coated handle Hardened ch...

Features: Includes 4mm, 5mm, 5.5mm, 7mm and 8mm sizes Ergonomic rubber-coated handle Hardened chrome vanadium shaft and socket Precision 6-point socket Long 75mm shaft Storage Pouch Rotating end cap

ProTek RC "TruTorque" 5-Piece 1/4" Drive Hex & ...

The ProTek RC "TruTorque" 5-Piece 1/4" Drive Hex & Nut Driver Set is an awesome tool kit. Gre...

The ProTek RC "TruTorque" 5-Piece 1/4" Drive Hex & Nut Driver Set is an awesome tool kit. Great for RTR's, race chassis' and trail bags, this small and compact kit features 1/4" drive steel hex tips, combined with 1/4" drive steel nut driver tips and an ergonomically designed molded composite handle that is easy to use by hands of any size. The set includes 1.5mm, 2.0mm and 2.5mm hex tips, as well as 5.5mm and 7.0mm nut driver tips. These tips fit the handle socket precisely, and can also...

Powerhobby RC Hex Driver 1/4" Power Tool Set Me...

Powerhobby Hex Driver 1/4" Power Tool Tip Set Metric 1.5, 2.0, 2.5, 3.0mm Hex wrench set is 1/4 i...

Powerhobby Hex Driver 1/4" Power Tool Tip Set Metric 1.5, 2.0, 2.5, 3.0mm Hex wrench set is 1/4 inch quick release hex shank driver bits fit for an electric screwdriver, hand screwdriver, and electric drills. The hex key set made of heat-treated high-quality solid steel, ensure high torsion and proper hardness to avoid the bits break and wear.