Shocks
$13.99 – $13.99 (9 variants)
DLUX Offset Shock Cap with Hardware (Pair)
Offset Shock Cap for the Dlux, Dravtech, or the Traxxas Big Bore (2660, 2661 and 2662). It allows...
Offset Shock Cap for the Dlux, Dravtech, or the Traxxas Big Bore (2660, 2661 and 2662). It allows you to have the same shock travel but with lower total length of the shock. Modifications may be required to big bore shocks or O-rings between the bladder and cap so it does not leak. ***Please note that this is only the Shock Cap and not a complete shock. *** Reduces the length of your ultra-short Dlux shocks by ~11mm Reduces the length of all other Dlux shocks by ~15mm when used with shor...
$89.99 – $89.99 (6 variants)
Dlux Dravtech Short Shocks with Traxxas Rebuild...
Product Details Dravtech Big Bore shocks. 96mm eye to eye length. Please understand that the ...
Product Details Dravtech Big Bore shocks. 96mm eye to eye length. Please understand that the anodizing varies from batch to batch, so the color of the shocks might be slightly different from the pictures above or previous batches that we have sold. Includes everything you need:Rod endsCaps with rod end modLathed down shock bodySpringsNo pre load shock cupsOrings and sealsTitanium shock shaftsTraxxas Shock Rebuild Kit PN: 2362 **No oil installed or included**The little O rings supplied are...
$84.99
Element RC Factory Team 10x90mm Enduro Shock Set
This is an optional Element RC Factory Team 10x90mm Enduro Shock Set, intended for use with the E...
This is an optional Element RC Factory Team 10x90mm Enduro Shock Set, intended for use with the Enduro 1/10 Rock Crawler kit. Factory Team's 10x90mm coil-over shock set comes standard with CNC-machined aluminum shock bodies, ultra-smooth Delrin pistons, polished steel shock shafts, threaded aluminum spring collars, chromed steel pivot balls, mounting hardware and Element RC's 1.49 lb/in gray springs.
$74.99 – $74.99 (7 variants)
Dlux Dravtech Medium Shocks with Traxxas Rebuil...
Product Details Dravtech Big Bore shocks. 106mm eye to eye length. Please understand that the...
Product Details Dravtech Big Bore shocks. 106mm eye to eye length. Please understand that the anodizing varies from batch to batch, so the color of the shocks might be slightly different from the pictures above or previous batches that we have sold. Includes everything you need:Rod endsCaps with rod end modLathed down shock bodySpringsNo pre load shock cupsOrings and sealsTitanium shock shaftsTraxxas Shock Rebuild Kit PN: 2362 **No oil installed or included**The little O rings supplied ...
$11.99
Losi Rear Shock Springs (3 pair): Mini-T 2.0
Spring Ratings Silver Springs – SoftBlack Springs – MediumGold Springs – Hard
Spring Ratings Silver Springs – SoftBlack Springs – MediumGold Springs – Hard
$29.99
Hot Racing Axial SCX24 Aluminum Threaded Oil Em...
Features: Machined aluminum construction Threaded shock bodies for quick pre-load adjustments S...
Features: Machined aluminum construction Threaded shock bodies for quick pre-load adjustments Scale-looking reservoir (non-functioning; for scale only) Three spring rates included Replaces Axial AXI31612 SCX24 shock set Reservoir is for aesthetics only and is non-functional NOTE: Silicone shock should be only fully filled 80% with shock shaft compress 80%. Mount with wide flange outward to retain O-rings. Specifications: Extended length eye-to-eye: ~32.5mm Compressed length eye-to-...
$71.99 – $71.99 (6 variants)
Dlux Dravtech Ultra Short Shocks with Traxxas R...
Based on the original Dravtech design, the Dlux Big Bore shocks have come a long way. Please unde...
Based on the original Dravtech design, the Dlux Big Bore shocks have come a long way. Please understand that the anodizing varies from batch to batch, so the color of the shocks might be slightly different from the pictures above or previous batches that we have sold. Dravtech Big Bore shocks. 80mm eye to eye length. Includes everything you need:Rod endsCaps with rod end modDlux-spec shock bodySpringsNo pre load shock cupsOrings and sealsTitanium shock shafts**No oil installed or included**...
$26.99 – $26.99 (2 variants)
Powerhobby 1/24 Axial SCX24 Aluminum 58mm Long ...
Powerhobby Aluminum Threaded Long Travel Shocks 58mm For 1/24 Scale and similar size Crawlers. Al...
Powerhobby Aluminum Threaded Long Travel Shocks 58mm For 1/24 Scale and similar size Crawlers. Aluminum Damper for the Axial SCX24, or other mini/micro crawler. These shocks are friction damped, requiring only a coating of tacky grease. They include a machined reservoir shock cap for realistic scale looks. Features:- Machined aluminum construction- Telescopic design for maximum travel- Threaded shock bodies for quick pre-load adjustments- Three spring rates included Includes:- Four (4) shocks...
$5.99 – $5.99 (6 variants)
DLUX No Pre-Load Shock Spring Cups
No pre load shock cups. Made to adjust the pre load on Big Bore shocks but may be used on many ot...
No pre load shock cups. Made to adjust the pre load on Big Bore shocks but may be used on many others. Comes with enough to do 2 shocks: 2 shock cups 6 pre load o ringsUse the supplied rubber o rings under the spring to increase or decrease spring pre-load.
$99.99 – $99.99 (2 variants)
Dlux Mini Capra Shock Set, Fits Axial UTB18
Product Details Dlux shock set for the 1:18th scale Axial Mini Capra UTB18. Dlux has figured ...
Product Details Dlux shock set for the 1:18th scale Axial Mini Capra UTB18. Dlux has figured out the perfect shock absorber combination for the Mini Capra. Lowers the right height a bit in the rear, and a bit more up front to give just a bit of an angled belly to help with breakovers. They put this package together to save folks some money and time compared to buying all the same parts individually. Includes: Ultra short shocks (80mm) Offset shock caps Axial width rod end balls - wider th...
$29.99
Hot Racing Axial SCX24 32mm Internal Spring Air...
Features: CNC machined aluminum shock bodies, black anodized Precision machined mm stainless st...
Features: CNC machined aluminum shock bodies, black anodized Precision machined mm stainless steel shock shaft for durability Delrin lower shaft seal Air damping Internal springs included: Black (Stiff) All aluminum is anodized for durability and corrosion resistance Includes: (4) assembled shocks (2) black (Stiff) springs (2) silver (soft) springs (8) Cap head screws
$4.99 – $4.99 (3 variants)
Sold in pairs Popular for use with many modded shock bodies including Element, Traxxas, and Dravt...
Sold in pairs Popular for use with many modded shock bodies including Element, Traxxas, and DravtechColors are for reference only to the type of spring and rate. Springs will NOT come in this color. All springs are either black or raw/silver color.Ultra soft = whiteSoft = Blue - previously no paintMedium = Red - previously blueHard = Green To give an idea of how hard these are, here is what it takes to fully compress each spring: Hard spring approx 76oz or 4.75lbs X Hard spring approx 96oz...
$19.99
Hot Racing Axial SCX24 Telescopic Threaded Shoc...
Features: Machined aluminum and brass construction Telescopic design for maximum travel Threade...
Features: Machined aluminum and brass construction Telescopic design for maximum travel Threaded shock bodies for quick pre-load adjustments Three spring rates included Specifications:Extended Length: 48.5mmCompressed Length: 28.5mmStroke: 20mmSpring Length: 32mmSpring Diameter: 0.3mm, 0.35mm, 0.4mmIncludes: (4) Threaded Shock Bodies (4) Brass Second Stage Shock Bodies (4) Threaded Collars (4) Soft Springs (Black) (4) Med Spring (Gold) (4) Firm Springs (Silver) Needed to Complete: Par...
$11.99 – $11.99 (3 variants)
Reve D Aluminum Spring Retainer, (2)
The Reve D Aluminum Spring Retainers increases suspension performance due to reduced spring movem...
The Reve D Aluminum Spring Retainers increases suspension performance due to reduced spring movement within the spring cups and retainers. Depending on your set up, the height of the spring retainers is offered in four different sizes. The 0mm type features the same specifications as the YD-2 Yokomo retainers, and the other three sizes can be used for different tuning options - or for a wide variety of other shock dampers and RC drift cars. Increasing offset size (larger offsets) increase cha...
$26.99
TREAL SCX24 Shocks 43mm Tele Shock Vibration Da...
TREAL SCX24 Shocks 43mm Tele Shock Vibration Damper(4) for 1/24 Axial SCX24 Bronco Gladiator C10 ...
TREAL SCX24 Shocks 43mm Tele Shock Vibration Damper(4) for 1/24 Axial SCX24 Bronco Gladiator C10 Deadbolt Features: 1. Compatiable with Axial SCX24 AXI00006 Bronco AXI00005 Gladiator AXI00001 C10 AXI00002 Deadbolt2.Nice lengthened shocks 43mm (hole to hole) to lift your SCX24 Crawler, eliminated tire rub issues, larger travel distance3.Coming with three thickness options of springs, you can use the proper stiffness spring for your truck body weight4.Add the needed flex to the mini crawler,p...
$24.99
Treal SCX24 Aluminum Shocks Threaded (4P) for A...
Product description Treal SCX24 Aluminum Shocks Threaded (4P) for Axial 1/24 Truck 1. Material:...
Product description Treal SCX24 Aluminum Shocks Threaded (4P) for Axial 1/24 Truck 1. Material: Aluminum2. Fit in : Axial SCX24 Deadbolt, Jeep, Chevrolet C10, B-17 Betty.3. Package:-Shocks with silver springs 4pcs;-Extra springs black 4pcs;-Hardwares
$24.99
Treal SCX24 Aluminum Shocks Threaded (4P) for A...
Product description Treal SCX24 Aluminum Shocks Threaded (4P) for Axial 1/24 Truck 1. Material:...
Product description Treal SCX24 Aluminum Shocks Threaded (4P) for Axial 1/24 Truck 1. Material: Aluminum2. Fit in : Axial SCX24 Deadbolt, Jeep, Chevrolet C10, B-17 Betty.3. Package:-Shocks with silver springs 4pcs;-Extra springs black 4pcs;-Hardwares
$26.99
Powerhobby Axial SCX24 Aluminum 45mm Long Shock...
Powerhobby Axial SCX24 Aluminum 45mm Long Shocks Front & Rear (4) Fits : All Scx24 Versions
Powerhobby Axial SCX24 Aluminum 45mm Long Shocks Front & Rear (4) Fits : All Scx24 Versions
$49.99
Traxxas Shocks, GTM, 6061-T6 aluminum (4) GRAY:...
Traxxas Shocks, GTM, 6061-T6 aluminum (dark titanium-anodized) (fully assembled w/o springs) (4) ...
Traxxas Shocks, GTM, 6061-T6 aluminum (dark titanium-anodized) (fully assembled w/o springs) (4) GRAY: TRX-4M, TRX4M Take your TRX-4M™ to the next level with big-truck suspension technology. Heavy-duty GTM shocks are made from tough 6061-T6 aluminum and anodized with a brilliant finish. Give your TRX-4M long-lasting reliability and smoother suspension travel with these high-quality dampers. Shocks are sold assembled as a set of four with pre-load spacers (4). Springs sold separately.
$89.99
Pit Bull Tires BDS Kronik 100mm Super Shocks (2)
Pit Bull BDS Kronik 100mm Super Shocks, are officially licensed by BDS Suspension. Featuring "Sup...
Pit Bull BDS Kronik 100mm Super Shocks, are officially licensed by BDS Suspension. Featuring "Super Seal Technology" Pit Bull Kronik shocks use four internal shock shaft seals to reduce shock leakage and create super smooth suspension travel. The adjustable spring collars allow for on the fly adjustments without having to unscrew the Lower Seal Retainer. Three years of development help to give the Kronik shock a realistic look and feel and are ideal for any scale build that uses 100mm shocks....
$24.99
Treal SCX24 Aluminum Shocks Threaded (4P) for A...
Product description Treal SCX24 Aluminum Shocks Threaded (4P) for Axial 1/24 Truck 1. Material:...
Product description Treal SCX24 Aluminum Shocks Threaded (4P) for Axial 1/24 Truck 1. Material: Aluminum2. Fit in : Axial SCX24 Deadbolt, Jeep, Chevrolet C10, B-17 Betty.3. Package:-Shocks with silver springs 4pcs;-Extra springs black 4pcs;-Hardwares
$26.99
TREAL SCX24 Shocks 43mm Tele Shock Vibration Da...
TREAL SCX24 Shocks 43mm Tele Shock Vibration Damper(4) for 1/24 Axial SCX24 Bronco Gladiator C10 ...
TREAL SCX24 Shocks 43mm Tele Shock Vibration Damper(4) for 1/24 Axial SCX24 Bronco Gladiator C10 Deadbolt Features: 1. Compatiable with Axial SCX24 AXI00006 Bronco AXI00005 Gladiator AXI00001 C10 AXI00002 Deadbolt2.Nice lengthened shocks 43mm (hole to hole) to lift your SCX24 Crawler, eliminated tire rub issues, larger travel distance3.Coming with three thickness options of springs, you can use the proper stiffness spring for your truck body weight4.Add the needed flex to the mini crawler,p...
$3.99 – $3.99 (2 variants)
An extra pair of springs and cups. Choose spring rate below.
An extra pair of springs and cups. Choose spring rate below.
$5.99 – $5.99 (2 variants)
Dlux Dravtech Big Bore Shock Caps (2)
Dravtech Big Bore cap. These caps fit the Traxxas Big Bore shocks and eliminate the stock eyelet ...
Dravtech Big Bore cap. These caps fit the Traxxas Big Bore shocks and eliminate the stock eyelet and replace it with a hole for a rod end. 2- caps with every purchaseRod ends and hardware not included.
$37.99
Yokomo RWD Drift Spring Set (6) (2 Front, 4 Rear)
This Yokomo Rwd Drift Spring Set has been developed for the fine tuning of your chassis to fit a ...
This Yokomo Rwd Drift Spring Set has been developed for the fine tuning of your chassis to fit a surface type and track layout suited for drifting. With six different options, two for the front and four for the rear, it is easy to adjust your drift car to suit carpet, asphalt, concrete and other road surfaces. Due to the special characteristics of the material used to make them, the springs have not been coated or any treatment added to keep the springs at their original performance. Over tim...
$7.99
Yokomo YD-2 LF Big Bore Tapered Shock Piston (1...
The Yokomo YD-2 LF Big Bore Tapered Shock Piston. This is product developed by the Yokomo Drift m...
The Yokomo YD-2 LF Big Bore Tapered Shock Piston. This is product developed by the Yokomo Drift members. One side of the shock piston has been tapered. The damping feeling differs depending on the mounting direction. To soften the feeling on the extension place the tapered side to the bottom of the shock. To soften the feeling on the contraction place the tapered side towards the shock cap.The piston holes have a diagonal slope and also affect the fluid dynamics within the shock body. This ha...
$2.49
TRAXXAS SILICONE O-RINGS, BLUE (12)
TRAXXAS SILICONE O-RINGS, BLUE (12) *Can be used in the Redcat Ascent to increase shock performa...
TRAXXAS SILICONE O-RINGS, BLUE (12) *Can be used in the Redcat Ascent to increase shock performance.
$49.99
AXIAL SHOCK SET COMPLETE (2): 1/10 SCX10 PRO
Axial SCX10 Pro Shock Set Complete. This is a replacement intended for the SCX10 Pro rock crawler...
Axial SCX10 Pro Shock Set Complete. This is a replacement intended for the SCX10 Pro rock crawler. Package includes two pre-assembled shocks with springs. NOTE: Shock fluid is not included and will need to be purchased separately.
$61.99
Pro-Line 1/10 Pro-Spec Front/Rear (90mm-95mm) S...
Product Details Key Features Smoothest Scale Shocks Pro-Line has ever made Single Low Friction ...
Product Details Key Features Smoothest Scale Shocks Pro-Line has ever made Single Low Friction X-Ring Seal Prevents Leaks Optional +5mm Shock Ends Included Perfect for Super Scale Rigs In The Box Pro-Spec Scaler Shocks (90mm-95mm) (2 pcs) +5mm Shock Ends (2 pcs) Upper Pivot Balls (2 pcs) Overview This is a pair of Pro-Spec Scaler Shocks. Pro-Line is proud to announce the next generation of RC Shock Technology with our all-new Pro-Spec Scaler Shocks! The new Shocks feature CNC machined Al...
$39.99
Pro-Line 1/24 Big Bore Scaler Shocks (4): SCX24
Key Features Ultimate Performance SCX24 Shocks CNC Machined Aluminum Shock Caps, Bodies, and Bo...
Key Features Ultimate Performance SCX24 Shocks CNC Machined Aluminum Shock Caps, Bodies, and Bottom Caps Leak-free Double O-Ring Seal Polished Steel Shock Shaft Optional Stiff Springs Included, Ideal for Heavier Bodies In The Box (4 pcs) Big Bore Scaler Shocks (4 pcs) Optional Stiff Springs (4 pcs) M1.4 x 14mm Upper Screws (4 pcs) M1.4 x 10mm Lower Screws Overview This a set of Big Bore Scaler Shocks, designed specifically for the Axial® SCX24™. Take your SCX24™ to the next level of per...
$26.99
TREAL SCX24 Shocks 43mm Tele Shock Vibration Da...
TREAL SCX24 Shocks 43mm Tele Shock Vibration Damper(4) for 1/24 Axial SCX24 Bronco Gladiator C10 ...
TREAL SCX24 Shocks 43mm Tele Shock Vibration Damper(4) for 1/24 Axial SCX24 Bronco Gladiator C10 Deadbolt Features: 1. Compatiable with Axial SCX24 AXI00006 Bronco AXI00005 Gladiator AXI00001 C10 AXI00002 Deadbolt2.Nice lengthened shocks 43mm (hole to hole) to lift your SCX24 Crawler, eliminated tire rub issues, larger travel distance3.Coming with three thickness options of springs, you can use the proper stiffness spring for your truck body weight4.Add the needed flex to the mini crawler,p...
$49.99
Traxxas GTM Shocks, 6061-T6 Anodized Aluminum (...
Traxxas GTM Shocks, 6061-T6 Anodized Aluminum (Fully Assembled w/o Springs) (4), Orange: TRX-4M, ...
Traxxas GTM Shocks, 6061-T6 Anodized Aluminum (Fully Assembled w/o Springs) (4), Orange: TRX-4M, TRX4M Take your TRX-4M™ to the next level with big-truck suspension technology. Heavy-duty GTM shocks are made from tough 6061-T6 aluminum and anodized with a brilliant finish. Give your TRX-4M long-lasting reliability and smoother suspension travel with these high-quality dampers. Shocks are sold assembled as a set of four with pre-load spacers (4). Springs sold separately.
$2.99
Traxxas Land Rover Defender GTM Shock Springs, ...
Traxxas Land Rover Defender GTM Shock Springs, 0.072 Rate (1 pair): TRX-4M, TRX4M GTM shock sprin...
Traxxas Land Rover Defender GTM Shock Springs, 0.072 Rate (1 pair): TRX-4M, TRX4M GTM shock springs are offered in different rates to tune your suspension performance or compensate for lighter or heavier vehicle configurations. The higher the spring rate number, the firmer the spring. (0.072 rate) (1 pair).
$49.99
Traxxas GTM Shocks, 6061-T6 Anodized Aluminum (...
Traxxas GTM Shocks, 6061-T6 Anodized Aluminum (Fully Assembled w/o Springs) (4), Blue: TRX-4M, TR...
Traxxas GTM Shocks, 6061-T6 Anodized Aluminum (Fully Assembled w/o Springs) (4), Blue: TRX-4M, TRX4M Take your TRX-4M™ to the next level with big-truck suspension technology. Heavy-duty GTM shocks are made from tough 6061-T6 aluminum and anodized with a brilliant finish. Give your TRX-4M long-lasting reliability and smoother suspension travel with these high-quality dampers. Shocks are sold assembled as a set of four with pre-load spacers (4). Springs sold separately.
$18.99
Incision S8E Machined Aluminum Shock Cap - Orange
S8E Machined Aluminum Shock Cap for Incision S8E shocks. A snap fit nylon insert into the shock c...
S8E Machined Aluminum Shock Cap for Incision S8E shocks. A snap fit nylon insert into the shock cap provides a slop free fitment while retaining the use of a upper pivot ball for smooth movement. Package Contains:X2 Machined Aluminum Shock CapX2 Nylon insert with location pin for snap fitment into shock capX2 Stainless Steel pivot ballsX2 Bleeder ScrewsX2 Bleeder screw washersFor use with S8E 80mm and S8E 90mm shocks. Shock cap uses a 9x7x1mm O-Ring. S8E Shock Rebuild KitDue to the nature of ...
$11.99
Incision S8E 80mm Shock Spring Tuning Set
The Incision S8E 80mm Shock Spring Tuning Set is an optional upgrade for Incision S8E 80mm shock...
The Incision S8E 80mm Shock Spring Tuning Set is an optional upgrade for Incision S8E 80mm shocks. Springs have a silver paint finish and are color marked to identify spring rate.Includes: (2) Red (soft) (2) Blue (medium) (2) Yellow (firm)
$67.99
Pro-Line Arrma PowerStroke Rear Shocks (3S/4S BLX)
Features: High-Performance Shock Upgrade for ARRMA® 3S and 4S Vehicles 14mm Big Bore Aluminum S...
Features: High-Performance Shock Upgrade for ARRMA® 3S and 4S Vehicles 14mm Big Bore Aluminum Shock Bodies with Infinite Spring Pre-load Adjustment Strong Machined Aluminum Shock Caps Beefy 3.5mm Shock Shafts True Dual-Rate Springs Included Injection Molded, Super Durable Shock Shaft Guard and Shock Ends Dual O-ring Seals and Upper and Lower Shock Shaft Guides Pre-assembled Just Add Oil! Fits: Kraton™ 4S Rear Outcast™ 4S Rear Senton™ 3S Rear Typhon™ 3S Rear Granite™ 3S Rear Specificati...
$44.99 – $44.99 (3 variants)
KNK Boss 90mm Shocks Pre Assembled Removable Lower Spring Retainer Proprietary Machined Piston wi...
KNK Boss 90mm Shocks Pre Assembled Removable Lower Spring Retainer Proprietary Machined Piston with O-Ring Seal Preventing All Blow By Fully Rebuildable Optional Offset Adjustable Mount Optional DLC (Diamond Like Coated) Shafts “Coming Soon” Optional Springs Available In (4) Spring Rates
$60.99
MST TR56 Aluminum Damper Set Shocks, RED (4)
The MST TR56 Aluminum Damper Set is a precision machined shock option for any MST kit. These shoc...
The MST TR56 Aluminum Damper Set is a precision machined shock option for any MST kit. These shocks feature hard coated shock bodies with teflon pistons and shock shaft guides, combined with a nickel coated shock shaft to deliver smooth damper action and long life. This kit includes all the parts you need to build a complete set of four shocks. It even includes the springs and shock oil! Plus, the kit includes three different length lower shock ends, allowing you to adjust the overall length ...
$29.99
Reve D PC Rear 32mm Spring Set w/Storage Box (3...
This package of Reve D PC Rear Springs provide you with an additional tuning option for RWD RC dr...
This package of Reve D PC Rear Springs provide you with an additional tuning option for RWD RC drift cars. The PC springs are specifically tuned for low grip conditions, specifically surfaces such as P tile, and colored concrete. This package includes three sets of springs, and are packaged inside of a small and compact plastic storage case.In addition to the stiffness of the springs, the springs are reversible, providing another layer of fine adjustment to your suspension and chassis. Pair t...
$6.99
Kyosho W5199-75 55mm Front Shock Spring (#75) (...
Kyosho W5199-75 55mm Front Shock Spring (#75) (2) Ultima RT5 / SC / DB
Kyosho W5199-75 55mm Front Shock Spring (#75) (2) Ultima RT5 / SC / DB
$33.88
Hot Racing Aluminum Front/Rear Adjustable Shock...
Hot Racing aluminum front and rear shock towers (hoops) for the Axial SCX24 vehicles FEATURES: - ...
Hot Racing aluminum front and rear shock towers (hoops) for the Axial SCX24 vehicles FEATURES: - Aluminum construction- Anodized black in color- Updated to more different shock mounting locations and lower battery by 5mm(to accommodate a variety of suspension setups) YOU WILL RECEIVE: - Two (2) black front shock tower support- Two (2) black rear shock tower support- Four (4) 6mm Cap Head M1.4- Eight (8) 5mm Cap Head M1.4 REQUIREMENTS: - Installation COMMENTS: - Replaces part of AXI31614 Axial...
$18.99
Incision S8E Machined Aluminum Shock Cap - Blue
S8E Machined Aluminum Shock Cap for Incision S8E shocks. A snap fit nylon insert into the sho...
S8E Machined Aluminum Shock Cap for Incision S8E shocks. A snap fit nylon insert into the shock cap provides a slop free fitment while retaining the use of a upper pivot ball for smooth movement. Package Contains: X2 Machined Aluminum Shock Cap X2 Nylon insert with location pin for snap fitment into shock cap X2 Stainless Steel pivot balls X2 Bleeder Screws X2 Bleeder screw washers For use with S8E 80mm and S8E 90mm shocks. Shock cap uses a 9x7x1mm O-Ring. S8E Shock Rebuild Kit Du...
$11.99
Spring tuning set for 90mm S8E shocks. Springs have a silver paint finish. Package includes: ...
Spring tuning set for 90mm S8E shocks. Springs have a silver paint finish. Package includes: X2 Red (soft) X2 Blue (medium) X2 Yellow (firm)
$44.99
FriXion RC REKOIL Scale Crawler Shocks w/Xtende...
FriXion Offroad REKOIL Scale Crawler Shocks are the ultimate choice in high performance, afforda...
FriXion Offroad REKOIL Scale Crawler Shocks are the ultimate choice in high performance, affordable scale shock technology. Featuring threaded aluminum shock bodies, a high quality shock seal cartridge and Ti-Nitride coated shock shafts, REKOIL shocks offer buttery smooth suspension action. Back that up with machined aluminum shock caps and you get a recipe for the ultimate in strength. A complete set of both dual and single rate springs are included to allow a wider range of tuning options,...
$44.99
FriXion RC REKOIL Scale Crawler Shocks w/Xtende...
FriXion Offroad REKOIL Scale Crawler Shocks are the ultimate choice in high performance, afforda...
FriXion Offroad REKOIL Scale Crawler Shocks are the ultimate choice in high performance, affordable scale shock technology. Featuring threaded aluminum shock bodies, a high quality shock seal cartridge and Ti-Nitride coated shock shafts, REKOIL shocks offer buttery smooth suspension action. Back that up with machined aluminum shock caps and you get a recipe for the ultimate in strength. A complete set of both dual and single rate springs are included to allow a wider range of tuning options,...
$24.99
Treal SCX24 Aluminum Shocks Threaded (4P) for A...
Product description Treal SCX24 Aluminum Shocks Threaded (4P) for Axial 1/24 Truck 1. Material:...
Product description Treal SCX24 Aluminum Shocks Threaded (4P) for Axial 1/24 Truck 1. Material: Aluminum2. Fit in : Axial SCX24 Deadbolt, Jeep, Chevrolet C10, B-17 Betty.3. Package:-Shocks with silver springs 4pcs;-Extra springs black 4pcs;-Hardwares
$13.99
RC4WD 100mm King Scale Shock Spring Assortment
Optional spring rates for King 100mm shocks. Allow you to adjust your dampening for many applicat...
Optional spring rates for King 100mm shocks. Allow you to adjust your dampening for many applications. Specifications: Direct fit for King 100mm Shock Enough for One Pair Length: 1.57in / 40.0mm OD: 0.59in / 15mm ID: 0.49in / 12.5mm Weight: 1.41oz / 40g What's Included: 4x Blue 100mm Shock Spring (2.0 Spring Rate "Black") 4x Blue 100mm Shock Spring (1.6 Spring Rate "Red") 4x Blue 100mm Shock Spring (0.8 Spring Rate "White") 4x Blue 100mm Shock Spring (0.4 Spring Rate "Yellow") Notes: ...
$89.99
Pit Bull Tires BDS Kronik 90mm Super Shocks (Go...
Pit Bull BDS Kronik 90mm Super Shocks, are officially licensed by BDS Suspension. Featuring "Sup...
Pit Bull BDS Kronik 90mm Super Shocks, are officially licensed by BDS Suspension. Featuring "Super Seal Technology" Pit Bull Kronik shocks use four internal shock shaft seals to reduce shock leakage and create super smooth suspension travel. The adjustable spring collars allow for on the fly adjustments without having to unscrew the Lower Seal Retainer. Three years of development help to give the Kronik shock a realistic look and feel and are ideal for any scale build that uses 90mm shocks. ...