Key City Drift

Reve D 2S Shorty LiPo Battery 100C w/4mm Bullet...

The Reve D 2s 7.4V 100C 3700mAh LiPo Battery, with 4mm Bullet Connectors was made to handle high ...

The Reve D 2s 7.4V 100C 3700mAh LiPo Battery, with 4mm Bullet Connectors was made to handle high performance vehicles. With a 100C discharge rating this battery can deliver consistent power when matched with high output motors. Using a "shorty" style case this battery can fit in the majority of vehicles and utilizes 4mm bullet connectors. With the high quality you expect from Reve D and performance to match this battery is an excellent upgrade.   Specifications: Capacity: 3700mAh Voltage: 2S ...

Bingo RC Designs Wasp MAX AWB Chassis

Bingo RC Designs Wasp MAX AWB Chassis for RDX The fully adjustable wheelbase chassis for the Rev...

Bingo RC Designs Wasp MAX AWB Chassis for RDX The fully adjustable wheelbase chassis for the Reve D RDX! The Bingo Wasp MAX AWB RDX chassis is essentially installed the same as the standard Wasp MAX chassis but you can easily change the wheelbase by loosening 4 screws, sliding the rear chassis to the desired position, and then tightening the screws again. You can fit bodies with a wheelbase of 225mm to 274mm, like the Kyosho Fazer bodies, which typically have a wheelbase of 274mm, or any re...

Yokomo 12mm Hex Racing Performer High Traction ...

These are the Yokomo Racing Performer High Traction RWD Drift Wheels, with a 12mm hex and 6mm off...

These are the Yokomo Racing Performer High Traction RWD Drift Wheels, with a 12mm hex and 6mm offset. These high traction type RP wheels are freshly designed, pursuing to the limit of traction and tracking ability on low grip road surfaces. By maintaining high circularity accuracy and giving it moderate flexibility, it induces "deflection" during throttle operation, greatly improving traction performance. The rib on the back side of the wheel is also a bold cut, reducing interference with the...

Yokomo RWD Drift Spring Set (6) (2 Front, 4 Rear)

This Yokomo Rwd Drift Spring Set has been developed for the fine tuning of your chassis to fit a ...

This Yokomo Rwd Drift Spring Set has been developed for the fine tuning of your chassis to fit a surface type and track layout suited for drifting. With six different options, two for the front and four for the rear, it is easy to adjust your drift car to suit carpet, asphalt, concrete and other road surfaces. Due to the special characteristics of the material used to make them, the springs have not been coated or any treatment added to keep the springs at their original performance. Over tim...

MST S-SBK GT offset changeable wheel set (4) (O...

The MST GT Offset Changeable Wheel Set features an aggressive five spoke pattern and modeled in f...

The MST GT Offset Changeable Wheel Set features an aggressive five spoke pattern and modeled in five lug bolt details. The design allows you to setup the wheel with a +3, +5, +7 or +9 offset to fit a variety of bodies, and setup the stance to create the look you want on your ride. Simply clock the wheel face inside the rim and glue in place. Package includes four wheels, four serrated wheel nuts and four adhesive foam strips. 

REVE D ALUMINUM SUSPENSION MOUNT TYPE TK SE

The lightweight and highly rigid aluminum suspension mount series [Type TK] SE(Shiny Edge) spec! ...

The lightweight and highly rigid aluminum suspension mount series [Type TK] SE(Shiny Edge) spec! The [Type TK], which has two rod end ball mounting holes on the upper surface of the suspension mount, attaches the rear upper arm to the suspension mount to create a direct feeling in the movement of the rear suspension, dramatically improving traction and control performance.

Reve D RDX EZ Type Aluminum Wheel Hub (2)

Reve D RDX EZ Type Aluminum Wheel Hub. These are an optional accessory intended for the RDX drift...

Reve D RDX EZ Type Aluminum Wheel Hub. These are an optional accessory intended for the RDX drift car. Constructed from CNC machined aluminum these hubs offer increased strength and precision over the stock plastic hubs. In addition, by holding down the pin that secures the hub with an O-ring, any pin vibration is reduced giving you smooth drivetrain action. Package includes two offset aluminum wheel hubs, two drive pins and two O-rings.

Yokomo YD-2 LF Big Bore Tapered Shock Piston (1...

The Yokomo YD-2 LF Big Bore Tapered Shock Piston. This is product developed by the Yokomo Drift m...

The Yokomo YD-2 LF Big Bore Tapered Shock Piston. This is product developed by the Yokomo Drift members. One side of the shock piston has been tapered. The damping feeling differs depending on the mounting direction. To soften the feeling on the extension place the tapered side to the bottom of the shock. To soften the feeling on the contraction place the tapered side towards the shock cap.The piston holes have a diagonal slope and also affect the fluid dynamics within the shock body. This ha...

Yokomo Drift Performance DX1 "R" Brushless Moto...

The Yokomo Drift Performance DX1 "R" Brushless Motor is great for plastic tile, asphalt or any ot...

The Yokomo Drift Performance DX1 "R" Brushless Motor is great for plastic tile, asphalt or any other medium grip surface. This motor was designed to have good low end torque that smoothly rolls to the high rpm band. The cutouts in this motor look great and help keep the motor cool. Package includes one brushless motor. Features: Suitable for plastic tile and low grip asphalt High rotation/torque - ideal for medium-grip road surfaces Latest stator and coil for smooth rotation Specificati...

REVE D Drift Wheel DP5, 6mm Offset, White (2)

Lightweight AND high-traction wheels are now available!By optimizing the material and design, Rev...

Lightweight AND high-traction wheels are now available!By optimizing the material and design, Reve D has achieved super light weight at around 11g per piece while ensuring the required strength! Sufficient traction is secured by paying attention to the hexagonal hub mounting points and rim dimensions!The best balanced wheel in "Lightweight And High Traction" has been completed!A Large Diameter and thin rim has been applied to the inside radius of the wheel. The large diameter rims prevent une...

REVE D Drift Wheel UL12, 6mm Offset, WHITE (2)

Lightweight AND high-traction wheels are now available!By optimizing the material and design, we ...

Lightweight AND high-traction wheels are now available!By optimizing the material and design, we have achieved super light weight at around 11g per piece while ensuring the required strength! Sufficient traction is secured by paying attention to the hexagonal hub mounting points and rim dimensions !The Best Balanced Wheel In "Lightweight And High Traction" Has Been Completed!A Large Diameter And Thin Rim Has Applied To The Inside Radius Of The Wheel. The Large Diameter Rims Prevent Unexpected...

DS Racing Drift Element 5 Spoke Drift Wheels (T...

The DS Racing Drift Element 5 Spoke Drift Wheels are a great option to add that custom look to yo...

The DS Racing Drift Element 5 Spoke Drift Wheels are a great option to add that custom look to your RC drift car. These wheels feature an adjustable offset allowing you to have a factory, tucked or even stanced look. Each wheel is broken down into five pieces: Inner wheel, Outer wheel, Wheel Face, Inner rivet ring and Outer rivet ring. DS Racing has made these components available in multiple color and style options allowing you to select the wheels that will best match your build. Assembly N...

Sideways RC Scale Drift Custom Wing Mount (Silv...

his is a pair of Sideways RC Style 6 Custom Wing Mounts, detailed scale option parts to add real...

his is a pair of Sideways RC Style 6 Custom Wing Mounts, detailed scale option parts to add realism to any 1/10 drift kit. These parts are hand made, machined out of metal and adjustable to fit any 1/10 scale body. This pack includes two machined metal mounts and hardware for installation.  Note: Modification to your model may be required when installing these parts. Wing shown in photos is for illustrative purposes only and is not included. Features: All parts are handmade. Machined me...

Sideways RC Scale Drift Side Pipe Intercooler V...

This is a Sideways RC Scale Drift Version 3 Side Pipe Intercooler, a detailed scale option part t...

This is a Sideways RC Scale Drift Version 3 Side Pipe Intercooler, a detailed scale option part to add realism to any 1/10 drift kit. This plastic part has been open cast molded out of quality polyurethane instead instead of 3D printed, keeping the cost down and quality up. This scale intercooler is handmade with the coloring infused directly into the product. This pack includes one scale small intercooler with black cables installed on the side and a silver finish that adds a high level of d...

Sideways RC Scale Drift Extreme Turbo

This is a Sideways RC Scale Drift Extreme Turbo, a detailed scale option part to add realism to a...

This is a Sideways RC Scale Drift Extreme Turbo, a detailed scale option part to add realism to any 1/10 drift kit exhaust. This plastic part has been open cast molded out of quality polyurethane instead instead of 3D printed, keeping the cost down and quality up. The half turbo is handmade with the colors infused directly into the product in multiple pigment options and a realistic paint scheme applied. This pack includes one molded plastic Extreme Turbo, and a template decal to help with mo...

Sideways RC Scale Drift Half Turbo w/Cone Filte...

This is a Sideways RC Red Scale Drift Half Turbo with Cone Filter, an ideal scale option part to ...

This is a Sideways RC Red Scale Drift Half Turbo with Cone Filter, an ideal scale option part to add realism to any 1/10 drift kit engine. This plastic part has been open cast molded out of quality polyurethane instead instead of 3D printed, keeping the cost down and quality up. This scale half turbo with a cone filter is handmade with the coloring infused directly into the product, and hand painted details. This pack includes one scale half turbo with a cone filter and a template decal to he...

Sideways RC Scale Drift Exhaust Tip

This is a Sideways RC Scale Drift Pipe Exhaust Tip, a detailed scale option part to add realism t...

This is a Sideways RC Scale Drift Pipe Exhaust Tip, a detailed scale option part to add realism to any 1/10 drift exhaust. This part has been cut from stainless steel and is a universal fit to all 1/10 scale bodies. This pack includes one scale pipe exhaust tip that has been heat treated to add a high level of detail to any scale application.   Note: Modification to your model may be required when installing these parts. Features: Burnt tip for realism. Angled edge. All parts are handmad...

Hobbywing Xerun D10 Drift Brushless Motor, 13.5T

Features Elegantly designed for driftThe Xerun D10 motors provide the ideal colors to perfectl...

Features Elegantly designed for driftThe Xerun D10 motors provide the ideal colors to perfectly match your drift machines. Available in Black, Red, and Purple. Banana plug-in quick-swap designThe motor comes factory soldered with high quality 3.5mm banana plug for easy access swap to different motors. 3.5mm male head is also included in the XD10 ESC. New stator designed for drift applicationsThe new motor stator is optimized for drift and improves motor efficiency in drift applications. ...

Aluminum Fan Cover, 30x30mm

Fan cover made of aluminum alloy, 30 x 30 mm, for RC motor

Fan cover made of aluminum alloy, 30 x 30 mm, for RC motor

Bingo RC Designs Wasp Front Bumper (AE DC10)

Introducing Bingo WASP Front Bumpers for use with the AE DC10 platform! Available in a variety of...

Introducing Bingo WASP Front Bumpers for use with the AE DC10 platform! Available in a variety of colors to perfectly match your style. This bumper is made from CNC carbon fiber, and includes holes to support the stock body post mount locations and are designed to be used as a carrying handle. Note: The colors which have no image are still in production, just waiting on materials. Some color availability is subject to change. MST: This bumper is only compatible with AE DC10 chassis.

Hobbywing OTA Programmer

The Hobbywing OTA Smartphone ESC Module Programmer is designed to wirelessly connect your ESC to...

The Hobbywing OTA Smartphone ESC Module Programmer is designed to wirelessly connect your ESC to your smartphone, using the Hobbywing HW Link APP to clearly display and adjust all parameters of the ESC. The graphical man-machine interface of drop-down list boxes and scroll bars is set up to make the parameter adjustments easier to use and more specific than ever before. The OTA programmer supports real-time data recording and stores the data in its memory, allowing the driver to access the c...

Yokomo MERCURY SAYAKA Special S15 Drift Body Se...

Yokomo MERCURY SAYAKA Special S15 Drift Body Set. The MERCURY SAYAKA SPECIAL S15 is a detailed dr...

Yokomo MERCURY SAYAKA Special S15 Drift Body Set. The MERCURY SAYAKA SPECIAL S15 is a detailed drift car body modeled after the vehicle driven by popular Japanese driver Sayaka Shimoda. This design is characterized by its wide form with over fenders and a distinctive GT wing, contributing to a racy and aggressive look. The body is designed to fit competition drift chassis with a wheelbase of 255mm, enhancing both aesthetic appeal and performance on the track. Package includes one body and two...

Bingo RC Designs Pit Box Wheel Organizer

Bingo RC Designs Pit Box Wheel Organizer The Pit Box Wheel Organizer allows you to neatly hol...

Bingo RC Designs Pit Box Wheel Organizer The Pit Box Wheel Organizer allows you to neatly hold up to 9 sets of wheels and tires in the pit boxes found in common 1/10 scale RC pit bags (e.g. Yokomo, ReveD etc). 3D printed base plate measures 8.25" x 9". Included are 9 support rods made from acrylic and measure 4mm in diameter. Compatibility: Yokomo/Reve D Pit Bag

Traxxas 4-Tec Drift Mustang 1/10 Rwd W/Tqi Radi...

Traxxas 4-Tec® Drift delivers the ultimate experience in modern, smooth, drifting action. Advance...

Traxxas 4-Tec® Drift delivers the ultimate experience in modern, smooth, drifting action. Advanced TSM® Drift technology makes 4-Tec Drift easy to master and endless fun on the track. Use the included Wireless Module to take advantage of three customizable and powerful drift modes in the Traxxas Link™ app for maximum control. A new rear-wheel-drive 4-Tec 200 mm platform with clipless Mustang body features an all-new front suspension tuned for optimal drift geometry with over 60° of steering a...

ONISIKI KIKOKU 10.5T 4050KV DRIFT PERFORMANCE B...

New generation of Onisiki drift motors with a newly overhauled design. Featuring a lightweight ca...

New generation of Onisiki drift motors with a newly overhauled design. Featuring a lightweight can design which also aids in cooling with more cutouts. Rotor with fan blades aid in drawing cool air into the motor coils. Feature: For: 1/10 Drift Material: Aluminum Color: Black/Gold Turns:10.5T KV:4050 Size:540 Lipo:2-3S Max Amps:65A Poles:2 No-load Current(A):2.4A Max Watts:550 Resistance (Ω):0.0155 Shaft Diameter(inches):Φ3.175 Mounting Hole Depth:<5mm Extensive Shaft Length:14mm Efficie...

Bingo RC Designs Battery Holder; Reve D RDX

Introducing the innovative magnetic battery tray for the Reve D RDX. This design includes changea...

Introducing the innovative magnetic battery tray for the Reve D RDX. This design includes changeable arms and a stylish finish. Features: -Light weight design -Battery is held in place with magnetic arms. -Fits shorty packs. Heights from 19mm to 25mm -Fits the Bingo WASP MAX Chassis Only! Specifications: Weight: 30-35g (Dependent on color) Includes: Battery retainers Top deck Magnetic arms Alum. spacer Hardware Compatible with Bingo Wasp MAX chassis.

Bingo RC Designs Wasp Front Bumper; Yokomo

This Bingo RC Designs Wasp Front Bumper is specifically designed for the Yokomo drift platform an...

This Bingo RC Designs Wasp Front Bumper is specifically designed for the Yokomo drift platform and features sleek and durable carbon fiber construction. Compatible with Yokomo YD-2, RD, SD, MD and Bingo Wasp RD2.0, Wasp RDX Chassis, Wasp YD2 Chassis For any Yokomo deck that uses the standard Yokomo front bumper mount holes, including the Bingo WASP RD 2.0/Max chassis.

Yokomo RPX-II Racing Performer Brushless ESC Sp...

ESC Overview: The Yokomo RPX-II Racing Performer Brushless Speed Controller represents the premiu...

ESC Overview: The Yokomo RPX-II Racing Performer Brushless Speed Controller represents the premium in ESC technology. Starting with high quality components such as a low resistance power supply and specialized FETs, Team Yokomo has created one of the most stable and powerful ESC's on the market. Optimized for driving performance it features in depth tuning options to adjust to a variety of track conditions and driver preferences. Changing the program settings can be done with the Yokomo Brush...

MST 501 Wheel Set (Flat Black) (4) (Offset Chan...

MST 501 Offset Changeable Wheel Set. These wheels feature a classic webbed pattern and molded in ...

MST 501 Offset Changeable Wheel Set. These wheels feature a classic webbed pattern and molded in 5 lug bolt details. The design allows you to setup the wheel with a +3, +5, +7 or +9 offset to fit a variety of bodies, and setup the stance to create the look you want on your ride. Simply clock the wheel face inside the rim and glue in place. Package includes four wheels, four serrated wheel nuts and four adhesive foam strips. 

MST 29mm Coil Spring Set (8)

The MST 29mm Coil Spring Set is compatible with the full range of MST drift chassis', and is a mu...

The MST 29mm Coil Spring Set is compatible with the full range of MST drift chassis', and is a must have for those who are serious about tuning. Available in Hard, Medium and Soft spring rates, this medium rate 29mm spring kit includes all four rates available in the medium range.    

MST 32mm Hard coil spring set (8)

The MST 32mm Hard Coil Spring Set is compatible with the full range of MST drift chassis', and is...

The MST 32mm Hard Coil Spring Set is compatible with the full range of MST drift chassis', and is a must have for those who are serious about tuning. Available in Hard, Medium, Soft, Super Soft and Extreme Soft spring rates, this hard rate 32mm spring kit includes all four rates available in the hard range.    

Futaba GYD470 Drift Car Countersteer Gyro

GYD470– Drift Car Counter Steer Gyro Rate Gyro for DRIFT RC Cars: Steering Use (01102373-3) FE...

GYD470– Drift Car Counter Steer Gyro Rate Gyro for DRIFT RC Cars: Steering Use (01102373-3) FEATURES:– Dedicated RC drift car setting– Remote gain function and mode switching function– Integrated, compact, and light weight– Easy setup– Supports S.Bus/S.Bus2 Connection The GYD470 has been designed for use with Futaba Transmitters, receivers and servos. GYD470 may not work properly with other non-Futaba combinations. (SR compatible) OPERATING VOLTAGE:DC 4.2-8.4V SIZE:20.5 mm x 20.5 mm x 11 m...

Yokomo Ball End Cap Set

This is a replacement Yokomo Ball End Cap Set. 

This is a replacement Yokomo Ball End Cap Set.