Best Sellers

Tamiya King Hauler 10X8WD Semi Tractor Kit, Bla...

In The Box 1/14 King Hauler 8WD Semi Tractor Kit, Black Edition Needed to Complete 4-Channel ...

In The Box 1/14 King Hauler 8WD Semi Tractor Kit, Black Edition Needed to Complete 4-Channel radio Receiver MFC-01 2 servos 7.2V battery pack & charger

VANQUISH CURRIE F9 SCX10-II REAR AXLE GREY ANOD...

PRODUCT DESCRIPTION Vanquish Products Currie F9 Aluminum Axle for Axial SCX10-II Fully licensed...

PRODUCT DESCRIPTION Vanquish Products Currie F9 Aluminum Axle for Axial SCX10-II Fully licensed by Currie Enterprises Comes with One Piece Bearing Retainers (Patent Pending) Rear Bearing Retainer Caps utilized to eliminate the need for lockouts and provide a more scale appearance Double shear shock mounts Upper link mounts built into third member Increased upper link clearance for more suspension up travel ability Compatible with factory Axial SCX10-II links    Includes the following: 1pc...

VANQUISH VS4-10 MOTOR MOUNT / GEAR GUARD GREY A...

Vanquish Products Aluminum Motor Mount/Gear Guard for 3-Gear Transmission Cases that allow for bo...

Vanquish Products Aluminum Motor Mount/Gear Guard for 3-Gear Transmission Cases that allow for bolt on motor plates Fits stock Axial AX-10, SCX10, SCX10-2 and SMT10 that use the 3 gear transmission with aluminum motor plate Provides protection for wiring, rocks and debris Motor plate has additional 4th mounting hole location for improved motor plate support to help reduce motor plate torquing and flexing under load Comes with all hardware shown Comes with spacers to allow the use of Axial's ...

Pro-Line DIY Scale Accessory Assortment #8

The Pro-Line DIY Scale Accessory Assortment #8 includes a variety of injection-molded accessories...

The Pro-Line DIY Scale Accessory Assortment #8 includes a variety of injection-molded accessories, and is ready for your custom paint job! This DIY Scale Accessory Assortment #8 includes Fuel Cell, Nitro Bottle, Bottle Bracket, Fuel Pump, Fuel Regulator and Fire Pit Grate. Features: Injection Molded Highly Detailed Replica Accessories Adds Unparalleled Realism to your Scale Rock Crawler Can be Painted for the Ultimate Customizable Experience Perfect for 1:10 Crawlers and 1:10 Monster Trucks 

Pro-Line PRO-MT 4x4 Front Upper & Lower Arm Set

This is a replacement Pro-Line PRO-MT 4x4 Front Upper and Lower Arm Set. These arms are not direc...

This is a replacement Pro-Line PRO-MT 4x4 Front Upper and Lower Arm Set. These arms are not directional. 

Power Shift The Official Shred The Ledge™ Winch.

Product Details Specs 333oz of torque .08 transit time HV controller included aluminum hook 6...

Product Details Specs 333oz of torque .08 transit time HV controller included aluminum hook 6ft of line Winch Controller is a 12.6v Max Voltage

Traxxas TRX-4 Front & Rear Body Mount & Post Set

Traxxas TRX-4 Front & Rear Body Mount & Post Set

Traxxas TRX-4 Front & Rear Body Mount & Post Set

Treal Aluminum Caster Blocks Protal Drive Kingp...

Treal Aluminum 7075 C Hubs Caster Blocks Protal Drive Kingpin Bushings for Traxxas TRX-41.Materia...

Treal Aluminum 7075 C Hubs Caster Blocks Protal Drive Kingpin Bushings for Traxxas TRX-41.Material: Aluminum 70752.Color: Black/Red/Blue3.Fits in: Traxxas trx-44.Original part number : #82325.Package: Caster Blocks 2pcs -Black and the screws as picture showed

VANQUISH AXIAL SCX10-III CURRIE F9 REAR AXLE CL...

Features Machined Aluminum Construction Adjustable 1 piece upper link mount One-Piece Machined B...

Features Machined Aluminum Construction Adjustable 1 piece upper link mount One-Piece Machined Bearing Retainers   Includes: Axle Housing 3rd member Rear 1 piece upper link mount Suspension link pivot balls One-piece bearing retainers Required hardware Note: Axle is designed to work with factory Axial branded SCX10-III components.  Vanquish Products cannot guarantee the fitment of other aftermarket brand components with our axle housings. 

Traxxas LaTrax Alias Ready-To-Fly Micro Electri...

Alias Quad-Copter Features: Quad-rotor thrust with auto-leveling 6-axis flight system Three cus...

Alias Quad-Copter Features: Quad-rotor thrust with auto-leveling 6-axis flight system Three customizable flight modes: Easy, Fast, Expert Easy Mode – Auto-leveling with limited flight angle Fast Mode – Auto-leveling with more aggressive flight angles and one-button flips, rolls, and twists Expert Mode – Disables auto-leveling, fully adjustable rates, perform manual maneuvers, and one-button auto-leveling recovery Crash-proof, virtually indestructible design! Integrated high-intensity LED ...

Traxxas 4-Tec 3.0 1/10 RTR Touring Car w/Factor...

Features:   Replica Factory Five Hot Rod ProGraphix® Bodies Factory Installed LED Lighting Low C...

Features:   Replica Factory Five Hot Rod ProGraphix® Bodies Factory Installed LED Lighting Low Center of Gravity Chassis Chassis Tuned for Handling High-Performance Waterproof XL-5™ Electronic Speed Control TQ™ 2.4GHz 3-Channel Radio System Titan™ 12T 550 modified motor High-torque waterproof Traxxas 2075 steering servo Adjustable Battery Hold Down All-Wheel Drive Replica Black Salt Flat Wheels Adjustable Oil-Filled GTR Shocks Specifications: Length: 16.7 inches (423mm) Front Track: 7.7 ...

Team Losi Racing Silicone Shock Oil (4oz) (37.5wt)

This is a 4oz bottle of Team Losi Racing silicone shock oil. Losi shock oil is made from 100% pur...

This is a 4oz bottle of Team Losi Racing silicone shock oil. Losi shock oil is made from 100% pure silicone oil and will not thin out in hot weather or thicken up in cold weather. The higher the weight number of the oil, the thicker the oil is. Losi shock oil is generally slightly thicker than Team Associated shock oil with the same 'weight' rating. Please use the pull down menu to pick the oil weight.

RPM Traxxas Unlimited Desert Racer Front Skid P...

Features: Three piece design for easier maintenance Upper compression zone for improved impact r...

Features: Three piece design for easier maintenance Upper compression zone for improved impact resistance Skid rib for better abrasion resistance Larger front radius for smoother transitions over tall obstacles NOTE: The RPM Unlimited Desert Racer Skid Plate replaces stock Traxxas TRA8537 and is guaranteed to work with stock Traxxas components only. The Traxxas steel support (not included) must be transferred over to the RPM skid plate.

HOLMES HOBBIES PULLER PRO V2 ROCK CRAWLER MOTOR...

Features: Four pole 18mm diameter x 25mm length rotor Twelve slot stator 13g phase wires with 4m...

Features: Four pole 18mm diameter x 25mm length rotor Twelve slot stator 13g phase wires with 4mm bullets installed Oversized bearings Sensored with adjustable timing Waterproof sensor board Includes sensor wire Specs: Standard 540 size motor 25mm mounting pattern M3 mounting screws 3.175mm shaft 36mm diameter 53mm length 210g (7.4oz) with wires 50,000 rpm max

HOLMES HOBBIES SENSOR WIRE 5.5" FOR CASTLE MAMB...

The Castle Mamba Micro X and Mamba Monster X use a proprietary socket that is incompatibl...

The Castle Mamba Micro X and Mamba Monster X use a proprietary socket that is incompatible with standard sensor wires. This sensor wire is 5.5 inches in length and comes with a Mamba Micro/Monster X-compatible plug on the ESC side and standard six-pin sensor plug on the motor side.

Powerhobby XT90 Male to EC3 Female Battery Adapter

Powerhobby XT90 Male to EC3 Female Battery Adapter

Powerhobby XT90 Male to EC3 Female Battery Adapter

Powerhobby XT90 Male to deans Female Battery Ad...

Powerhobby XT90 Male to deans Female Battery Adapter

Powerhobby XT90 Male to deans Female Battery Adapter

VANQUISH RIGID INDUSTRIES 4IN LED LIGHT BAR BLA...

Vanquish Products Aluminum Housing LED Light Bar Ultra scale low profile with extruded heat sink...

Vanquish Products Aluminum Housing LED Light Bar Ultra scale low profile with extruded heat sink fins Officially Licensed by Rigid Industries Operates on 11.1 volts Overall width for the 4in bar is 4.6in wide Comes partially assembled   Includes the following: 1pc LED Light Bar 2pcs Universal L Bracket Mount 24pcs 0-80 SHCS 3/16 2pcs M3 x 0.5 BHCS 10mm 2pcs M3 Nylon Nuts 2pcs Washers 1pc Wiring Diagram by Harley Designs

Traxxas Body Paint Metallic Black 13.5 ozs

Body paint, ProGraphix®, Metallic Black (13.5oz) Traxxas ProGraphix® Custom RC Paints deliver pro...

Body paint, ProGraphix®, Metallic Black (13.5oz) Traxxas ProGraphix® Custom RC Paints deliver professional-grade, airbrush-like results with the easy application and convenience of aerosol cans. ProGraphix RC Paint Features ­ Huge choice of custom colors Can size: 13.5 oz Ultra-fine spray Fast drying Clog-resistant comfort nozzle Nitro fuel resistant

Traxxas Body Paint Fluorescent Red 5 ozs

Body paint, ProGraphix®, Fluorescent Red (5oz) Traxxas ProGraphix® Custom RC Paints deliver prof...

Body paint, ProGraphix®, Fluorescent Red (5oz) Traxxas ProGraphix® Custom RC Paints deliver professional-grade, airbrush-like results with the easy application and convenience of aerosol cans. ProGraphix RC Paint Features ­ Huge choice of custom colors Can size: 5 oz Ultra-fine spray Fast drying Clog-resistant comfort nozzle Nitro fuel resistant

VITAVON Losi LaserNut CNC aluminum Front Tower ...

Item specifics Condition: New: A brand-new, unused, unopened, undamaged item (inc...

Item specifics Condition: New: A brand-new, unused, unopened, undamaged item (including handmade items). See the seller's ... Read moreabout the condition Model: Laser nut Modified Item: No Country/Region of Manufacture: China Custom Bundle: No Compatible Fuel Type: Electric Type: front tower brace Bundle Listing: No Non-Domestic Product: No Color: Silver MPN: Does Not Apply Compatibl...

RPM Trailing Arms - Traxxas Unlimited Desert Racer

Features: Increased wall thicknesses by roughly 40% around the shock mounts Roughly 12% more mat...

Features: Increased wall thicknesses by roughly 40% around the shock mounts Roughly 12% more material around the pivot balls Squared off body is less prone to bend Optional TRA81362 Skid Plates also available (sold separately) Replaces stock Traxxas TRA8544

Element RC Enduro Pinion Gear (8T)

This is a replacement Element RC 8T Pinion Gear, intended for use with the Element Enduro. 

This is a replacement Element RC 8T Pinion Gear, intended for use with the Element Enduro. 

RC4WD Trailing Arm: SMT10 Yeti Bomber

RC4WD Trailing Arm: SMT10 Yeti Bomber

RC4WD Trailing Arm: SMT10 Yeti Bomber

Hot Racing Wraith Aluminum Transmission Case (B...

Features: Billet machined 6061-T6 aluminum transmission case Black and silver anodized aluminum ...

Features: Billet machined 6061-T6 aluminum transmission case Black and silver anodized aluminum Direct fit hop transmission that requires no vehicle modification for use Compatible with dig and non-dig configurations Requires: Assembly and installation Transmission internal gears and components Removable thread lock (e. g. blue Loctite) for screws threading into metal Comments: Replaces Axial plastic AXI80051 Dig Transmission Case Recommended with dig units: Axial AXI30793 or Hot Racing ...

Traxxas TRX-4 PTFE Coated Aluminum GTS Shocks (2)

Traxxas TRX-4 Aluminum GTS Shocks give your rig a custom look. By combining PTFE Coated Aluminum ...

Traxxas TRX-4 Aluminum GTS Shocks give your rig a custom look. By combining PTFE Coated Aluminum shock bodies with Titanium-Nitride treated shafts, these shocks provide the smoothest damping of any Traxxas TRX-4 shock, and improved overall performance. The shock features an 11mm diameter shock body, and is approximately 90mm long at full extension and 65mm long when compressed, delivering 25mm of travel! Package includes two factory assembled shocks and a bottle of unspecified weight shock fl...

Traxxas Rear Machined Portal Drive Input Gear (...

The Traxxas Rear Machined Portal Drive Input Gear is a heavy duty machined gear upgrade for Traxx...

The Traxxas Rear Machined Portal Drive Input Gear is a heavy duty machined gear upgrade for Traxxas TRX-4 and TRX-6 models. These gears require the TRA8063 heavy duty rear axle. Package includes one gear. Two gears are needed to complete the upgrade.

Traxxas Portal Drive Input Gear, Front (Machine...

Portal drive input gear, front (machined) (left or right) (requires #8060 front axle shaft)

Portal drive input gear, front (machined) (left or right) (requires #8060 front axle shaft)

Traxxas Front Shock Tower

This is a replacement Traxxas Front Shock Tower, and is intended for use with the Traxxas Slash 4...

This is a replacement Traxxas Front Shock Tower, and is intended for use with the Traxxas Slash 4x4 short course truck. This front shock tower attaches to the front bulkhead and secures the upper portion of the shock at the shock cap. 

Traxxas Caster Block Set

This is a replacement Traxxas Caster Block Set, and is intended for use with the Traxxas Slash 4x...

This is a replacement Traxxas Caster Block Set, and is intended for use with the Traxxas Slash 4x4 short course truck. 

Traxxas Plastic Multi-Tool

This is a replacement Traxxas Plastic Multi-Tool. 

This is a replacement Traxxas Plastic Multi-Tool. 

Traxxas Spinning carousel rack

Organize your shock oil in this spinning carousel rack. The carousel rides on bearings for smooth...

Organize your shock oil in this spinning carousel rack. The carousel rides on bearings for smooth spinning action.

Traxxas Official Team Racing Decal Set (Flag Lo...

The official Team Traxxas Racing Decal sheet has been revised and now includes EZ-Start®, Stinger...

The official Team Traxxas Racing Decal sheet has been revised and now includes EZ-Start®, Stinger Motors, ProGraphix, TRX® Engines and www.Traxxas.com logos. Perfect for adding that “final touch” to your Traxxas ProGraphix® painted body, or your own personal painting schemes.