Best Sellers

Yokomo YD-2 SXIII Ball Cup Set (4.8mm)

Yokomo YD-2 SXIII 4.8mm Ball Cup Set. This replacement ball cup set is intended for the Yokomo YD...

Yokomo YD-2 SXIII 4.8mm Ball Cup Set. This replacement ball cup set is intended for the Yokomo YD-2 SXIII platform. Package includes eighteen bull cups.

Yokomo RWD Drift Spring Set (6) (2 Front, 4 Rear)

This Yokomo Rwd Drift Spring Set has been developed for the fine tuning of your chassis to fit a ...

This Yokomo Rwd Drift Spring Set has been developed for the fine tuning of your chassis to fit a surface type and track layout suited for drifting. With six different options, two for the front and four for the rear, it is easy to adjust your drift car to suit carpet, asphalt, concrete and other road surfaces. Due to the special characteristics of the material used to make them, the springs have not been coated or any treatment added to keep the springs at their original performance. Over tim...

Team KNK SCX6 Stainless Hardware Kit

Kit includes 2mm, 2.5mm, 3mm, and 4mm hardware. 2.6mm hardware has been replaced with 2.5mm. Does...

Kit includes 2mm, 2.5mm, 3mm, and 4mm hardware. 2.6mm hardware has been replaced with 2.5mm. Does not include specialty screws.

Powerhobby Thin CA 1oz

POWERHOBBY THIN CA 1OZ Features: Gap Filling Formula Bonds Virtually Anything Cures in 5 seconds...

POWERHOBBY THIN CA 1OZ Features: Gap Filling Formula Bonds Virtually Anything Cures in 5 seconds or less

Team Associated DC10 Drift Car Kit

With the many suspension and chassis tuning options of the DC10, drivers can set up their car wit...

With the many suspension and chassis tuning options of the DC10, drivers can set up their car with precision. Since 1964, Team Associated has proven to be the leader in competition racing. And with its roots in on-road racing, it makes sense that our Area 51 engineers would develop the ultimate RC drift car, the DC10. In RC drifting, vehicle balance is key. With the many suspension and chassis tuning options of the DC10, drivers can set up their car with precision. From camber, caster, and ki...

Yokomo Drift Performance DX1 "R" Brushless Moto...

The Yokomo Drift Performance DX1 "R" Brushless Motor is great for plastic tile, asphalt or any ot...

The Yokomo Drift Performance DX1 "R" Brushless Motor is great for plastic tile, asphalt or any other medium grip surface. This motor was designed to have good low end torque that smoothly rolls to the high rpm band. The cutouts in this motor look great and help keep the motor cool. Package includes one brushless motor. Features: Suitable for plastic tile and low grip asphalt High rotation/torque - ideal for medium-grip road surfaces Latest stator and coil for smooth rotation Specificati...

VANQUISH AXIAL CAPRA CURRIE F9 FRONT AXLE CLEAR...

Features Offset Pumpkin Machined Aluminum Construction Increased Caster Over 50 degrees of steer...

Features Offset Pumpkin Machined Aluminum Construction Increased Caster Over 50 degrees of steering Removable upper link mount One-Piece Machined Bearing Retainers Additional mounting holes on rear of truss for custom applications Chromoly Incision VDI Universal Axle Shafts Bent Stainless Tie rod for added steering angle   Includes: Axle Housing 3rd member Chromoly Incision VDI offset universal axle shafts Removable front upper link mount Stainless Drag link and Tie-rod with rod ends Suspe...

Palm Beach Bots Palm Power 2S 180mAh 45C Lipo B...

Palm Power 2S 180mAh battery with a high 45C discharge rate and JST connector and balance lead fo...

Palm Power 2S 180mAh battery with a high 45C discharge rate and JST connector and balance lead for charging.    Popular Applications: Fairyweight (150g) bots Running two batteries in a larger bot to provide different voltage to weapon/drive Replacement for the now discontinued Turnigy Nano-Tech 180mAh.  Specifications: Capacity: 180mAh Voltage: 2 Cell / 7.4V Discharge: 45C Weight: 14g - (Because of the size these are weighed in multiples to determine a more specific weight, see images).   ...

Treal Brass Rear Inner Portal Cover Housing and...

Product description Treal Brass Rear Inner Portal Cover Housing and Portal Drive Axle Mounts (2)...

Product description Treal Brass Rear Inner Portal Cover Housing and Portal Drive Axle Mounts (2)pcs Blacken for Traxxas TRX-41.Material: Brass2.Weight:85.5g/pair3.Fits in: Traxxas trx-44.Original part number : #8253 & #82565.Package:Inner Portal Cover Housing and Portal Drive Axle Mounts (2)pcs and the screws as picture showedTreal is pround to announce that this brass rear portal covers in Black is now Recon G6 ceritified in 2020 in PA

CP44 BOLT ON PANHARD MOUNT

NON-STOCK BOLT-ON PANHARD MOUNT ONLY FITS SUPERSHAFTY CP44 AXLE MADE BY TGH FOR SUPERSHAFTY EXCLU...

NON-STOCK BOLT-ON PANHARD MOUNT ONLY FITS SUPERSHAFTY CP44 AXLE MADE BY TGH FOR SUPERSHAFTY EXCLUSIVELY 

Traxxas 1/18 High Trail TRX-4M Chevrolet '79 K1...

Small-scale adventure takes a big leap in performance with the TRX-4M™ Chevrolet® K10 High Trail...

Small-scale adventure takes a big leap in performance with the TRX-4M™ Chevrolet® K10 High Trail™ Edition. The High Trail pickup comes with a preinstalled Long Arm Lift Kit for 35% more center ground clearance than a standard TRX-4M and an extended wheelbase for even more all-terrain capability. Oversize Mickey Thompson® Baja Pro™ XS tires enhance traction and give K10 a dramatic lifted truck profile. From indoor fun to outdoor adventure, TRX-4M K10 High Trail Edition delivers the quality an...

JConcepts JCI Tucked 1978 Chevy K10 Body: 1/10

The 1978 Chevy K10 is the latest body to be added to a JConcepts line-up of bodies designed for m...

The 1978 Chevy K10 is the latest body to be added to a JConcepts line-up of bodies designed for more competition based crawling needs. Designed by JConcepts, the tucked body layout creates more tire space, less overhang while still giving a strong and loyal Chevrolet presence. The 1978 styling represented the 3rd generation of trucks from General Motors, and even though they are known today as “square body trucks,” it was originally designated as the “rounded line.” Inspiration can arrive at ...

REVE D ALUMINUM SUSPENSION MOUNT TYPE TK SE

The lightweight and highly rigid aluminum suspension mount series [Type TK] SE(Shiny Edge) spec! ...

The lightweight and highly rigid aluminum suspension mount series [Type TK] SE(Shiny Edge) spec! The [Type TK], which has two rod end ball mounting holes on the upper surface of the suspension mount, attaches the rear upper arm to the suspension mount to create a direct feeling in the movement of the rear suspension, dramatically improving traction and control performance.

Yokomo YD-2 LF Big Bore Tapered Shock Piston (1...

The Yokomo YD-2 LF Big Bore Tapered Shock Piston. This is product developed by the Yokomo Drift m...

The Yokomo YD-2 LF Big Bore Tapered Shock Piston. This is product developed by the Yokomo Drift members. One side of the shock piston has been tapered. The damping feeling differs depending on the mounting direction. To soften the feeling on the extension place the tapered side to the bottom of the shock. To soften the feeling on the contraction place the tapered side towards the shock cap.The piston holes have a diagonal slope and also affect the fluid dynamics within the shock body. This ha...

REVE D REVOX STEERING GYRO FOR RWD DRIFT CAR

This is the gyro “REVOX” for RWD drift servo! The new feature, ``Gyro Curve Setting,' was created...

This is the gyro “REVOX” for RWD drift servo! The new feature, ``Gyro Curve Setting,' was created after repeated tests in various situations over a long period of time. The initial curve value can be set in 6 stages according to skill, road surface conditions, course layout, etc. You can instantly enjoy optimal settings with a click of the setup switch. The stylish aluminum casing has greatly simplified switches, and its lightweight and compact design allows it to be easily installed even in ...

NSDRC 27mm 25T 1/10 Clamping Monster Horn

27mm Monster Clamping Horn: One of the strongest servo horns on the market! Super thick, incredib...

27mm Monster Clamping Horn: One of the strongest servo horns on the market! Super thick, incredibly strong 7075 aluminum, with large M2 allen head clamping bolt. 25T Spline 5.9mm 27mm Length (Center spline to center furthest hole) M3 Threaded Holes 4mm Thick 7075 Aluminum

AXIAL AR45P UNIVERSAL AXLE SET (2): SCX10 III

AXIAL AR45P UNIVERSAL AXLE SET (2): SCX10 III

AXIAL AR45P UNIVERSAL AXLE SET (2): SCX10 III

SMC 7.4V (2S1P) 5200mAh 50C Wired Hardcase Batt...

HCL-EC 7.4V-5200mAh-50C pack Our new HCL-EC 50C packs are made with a blend of LCO/NMC in the cat...

HCL-EC 7.4V-5200mAh-50C pack Our new HCL-EC 50C packs are made with a blend of LCO/NMC in the cathode which lowers the cost of the pack at the expense of some power.  These are intended to compete with the lower priced packs being offered on Amazon but if you compare the weight, you will see our packs are heavier which means they will have better performance.   True mAh +/- 5%: 5200mAhVoltage: 7.4VC rate: 50CPower Factor:  TBD For more information click hereSize: 26mm x 47mm x 139mm Hardcase ...

Hot Racing Steel Transfer Case (T-Case) Gear Se...

Hot Racing steel transfer case (T-case) gear set for the 1/10th scale Axial Yeti and RR10 Bomber ...

Hot Racing steel transfer case (T-case) gear set for the 1/10th scale Axial Yeti and RR10 Bomber kit and RTR vehicles FEATURES: - CNC machined hardened #45 steel- Replaces stock powder metal gears- Black oxide coating for durability and corrosion resistance YOU WILL RECEIVE: - One (1) 15T, 32P input gear- One (1) 15T, 32P idler gear with integrated shaft- One (1) 27T, 32P output gear SPECIFICATIONS: - Pitch: 32 pitch (0.8 mod) REQUIREMENTS: - Light application of gear lubricant CO...

Powerhobby Aluminum 24T Axial SCX24 Stock Servo...

This horn will only fit the stock servo of SCX24 that comes with RTR SCX24 models. Aluminum servo...

This horn will only fit the stock servo of SCX24 that comes with RTR SCX24 models. Aluminum servo horn designed to give you the best steering lock when paired with the stock servo on your Axial SCX24! Locked in place with a screw to prevent any falling out whilst out on the trails.

Darkside 3D Printing 1/10 Milk Crate Scale Acce...

Darkside 3D Printing 1/10 Milk Crate Scale Accessory

Darkside 3D Printing 1/10 Milk Crate Scale Accessory

Powerhobby 3S 11.1V 2200mAh 75C Lipo Battery Pa...

Powerhobby 3S 11.1V 2200mAh 75C Lipo Battery Pack w Deans Plug 75c Continous / 150c BrustAll race...

Powerhobby 3S 11.1V 2200mAh 75C Lipo Battery Pack w Deans Plug 75c Continous / 150c BrustAll racers know, the most important factor for your batteries is stable voltage under load. These Powerhobby 3S 2200mAh 11.1V 75C / 150C Lipo Battery packs are meant to power your RC Car, Truck, Boat, Helicopter or quad for peak performance. Each pack is equipped with Deans/ T connectors and JST-XH style balance connectors.Includes : 1 BatteryPerfect fit for but not limited to :RC Airplane, RC Helicopter,...

Spare Time Hobbies Red Cat Ascent - Scale Interior

Do you want to add come scale appearance to your Ascent Body? Now you can! The interior is design...

Do you want to add come scale appearance to your Ascent Body? Now you can! The interior is designed to be use with or without the optional driver.  Fits: Red Cat Ascent RTR Body Red/Blue Modifications Required: None Included: 1 - M2.5x6 Button, 4 - m2.5x10 Button, 4 - m3x8 Flat Needed: Paint, Glue, Hex Driver, Double Sided Tape     Due to the nature of 3D printing, items may contain tiny visual blemishes. Items may require some trimming and painting for optimal visual appeal/fit; similar to w...

EXO Belay ESC 1800KV w/ Programmer

Our Belay Electronic Speed Controller is a high powered, silent ESC for non-sensored brushless an...

Our Belay Electronic Speed Controller is a high powered, silent ESC for non-sensored brushless and outrunner motors. All units will come programmed with a base tune set to the KV to match the motor of your choosing. Providing a hardware rating of 70 Amps of continuous and 110 Amps of burst, the control and power is delivered smoothly throughout the entire throttle band. Tested on 4S direct power servos with no issues. Rated up to 8S battery power. 4S Max recommended for Rock Crawlers. (Check ...

JConcepts 5.79" Tusk 2.2 All Terrain Rock Crawl...

JConcept Tusk 2.2" All Terrain Rock Crawler Tires. These tires feature a 5.79” overall diameter, ...

JConcept Tusk 2.2" All Terrain Rock Crawler Tires. These tires feature a 5.79” overall diameter, with hefty lugs and sidewall support. The center of the tire starts with a V-shaped lug with multiple steps to the sides for additional grip while the rubber flexes and contours to the landscape. The design team added large, staggered traction bars off the side continuing the V-shape pattern and while the shorter version steps in conjunction with the center lug, the longer version fills a void und...

HOLMES HOBBIES REVOLVER V3 SNUBNOSE 2500KV 10P

Revolver V3 Snubnose 2500Kv 10P Do you need a small and light motor for your vehicle, but do not ...

Revolver V3 Snubnose 2500Kv 10P Do you need a small and light motor for your vehicle, but do not want to sacrifice torque? Do you want the finest sensorless brushless low speed control? The Revolver 540 is an extremely torque dense and lightweight choice with exceptional startup and feel that rivals brushed motors!  The Snubnose model is 1/2 the torque of the Standard but is fantastic for lightweight vehicles needing a lower CG. Now the V3 has more mounting positions, beefier wire retainer, a...

Spektrum 7.4V 810mAh 2S Smart G2 50C LiPo Batte...

Pilots and drivers enjoy more Smart benefits with Spektrum™ Smart G2 50C LiPos. Not only are char...

Pilots and drivers enjoy more Smart benefits with Spektrum™ Smart G2 50C LiPos. Not only are charging parameters and performance data stored and uploaded automatically to Smart chargers, but no balance lead is needed — just one easy IC® connection! Powerful 50C continuous discharge rating to deliver high performance and longevity Balance charge through the IC2 connector data wire — with only one connection, no balance lead required Faster Auto Discharge at up to 1.5A to safe storage voltage...

TRAXXAS SILICONE O-RINGS, BLUE (12)

TRAXXAS SILICONE O-RINGS, BLUE (12) *Can be used in the Redcat Ascent to increase shock performa...

TRAXXAS SILICONE O-RINGS, BLUE (12) *Can be used in the Redcat Ascent to increase shock performance.

VANQUISH 1.5MM REPLACEMENT TOOL TIP

1.5mm Replacement Ground Steel Tool Tip Tool shaft diameter is 3.5mm

1.5mm Replacement Ground Steel Tool Tip Tool shaft diameter is 3.5mm

CowRC Hide Wipes Cleaning Wipes

Hide Wipes Hand and Surface Cleaning Wipes 110ct Canister:   Featuring an abrasive side for hard ...

Hide Wipes Hand and Surface Cleaning Wipes 110ct Canister:   Featuring an abrasive side for hard scrubbing and a soft side for those delicate jobs. They go a long way taking hours and hours to dry out. 1 or 2 Wipes max at a race is very realistic usage and they pack a lot of RC Cleaning convenience value in one canister. These were a huge hit across the board amongst our Team Testers and an immediate big seller!   Satisfaction 100% Guaranteed or your money back!

AXIAL SHOCK SET COMPLETE (2): 1/10 SCX10 PRO

Axial SCX10 Pro Shock Set Complete. This is a replacement intended for the SCX10 Pro rock crawler...

Axial SCX10 Pro Shock Set Complete. This is a replacement intended for the SCX10 Pro rock crawler. Package includes two pre-assembled shocks with springs. NOTE: Shock fluid is not included and will need to be purchased separately.

Sideways RC Scale Drift Wing (Version 1)

The Sideways RC Scale Drift Wing is the ultimate accessory for your Sideways Wing Mount. This pl...

The Sideways RC Scale Drift Wing is the ultimate accessory for your Sideways Wing Mount. This plastic part has been open cast molded from polyurethane to provide an affordable and durable upgrade. Plus, you can run the wing as is, or add one of two different side plate options to change the aesthetics. Package includes one wing, as well as one set of large side plates and one set of small side plates.   Features: All parts are handmade Open cast molded out of polyurethane Infused with pig...

Sideways RC Scale Drift Exhaust Tip

This is a Sideways RC Scale Drift Pipe Exhaust Tip, a detailed scale option part to add realism t...

This is a Sideways RC Scale Drift Pipe Exhaust Tip, a detailed scale option part to add realism to any 1/10 drift exhaust. This part has been cut from stainless steel and is a universal fit to all 1/10 scale bodies. This pack includes one scale pipe exhaust tip that has been heat treated to add a high level of detail to any scale application.   Note: Modification to your model may be required when installing these parts. Features: Burnt tip for realism. Angled edge. All parts are handmad...