Axles

$19.99 $169.99 (13 variants)

SuperShafty "CP44" Capra Axle System

SuperShafty "CP44" Capra Axle System Key Features: One Piece construction Machined from 7075 Al...

SuperShafty "CP44" Capra Axle System Key Features: One Piece construction Machined from 7075 Aluminum Increased Caster Angle to 20° for improved steering without side effects of leaning them too far back. (Stock is 12°) Externally Limited to 50° of side to side steering, but easily modified for more should you desire. (5° over stock Capra axles) Dimensions: CP44's are Axial Capra Axle Dimensions Compatibility: Our housings work with stock Capra Components. Such as the Axle shafts, and S...

$19.99 $289.99 (18 variants)

SuperShafty "CP43" Custom Axle System

IN STOCK SHIPPING NOW! SuperShafty "CP43" Custom Axle System Key Features: One Piece constructi...

IN STOCK SHIPPING NOW! SuperShafty "CP43" Custom Axle System Key Features: One Piece construction Machined from 7075 Aluminum Increased Caster Angle to 20° for improved steering without side effects of leaning them too far back. (Most Stock is 8°) Externally Limited to 50° of side to side steering, but easily modified for more should you desire. (5° over stock Capra/10.3 axles) Ability to run 3 link with Panhard as a drop in replacement for a 10.3 axle. OR Run 4 link with CMS OR Run 4 link ...

$22.99 $24.99 (7 variants)

SuperShafty Axial Capra Rear Axle Upper Link Re...

SuperShafty Axial Capra Rear Axle Upper Link Relocation Riser Bracket Works with stock Axial Ca...

SuperShafty Axial Capra Rear Axle Upper Link Relocation Riser Bracket Works with stock Axial Capra Rear straight Axle And SuperShafty "CP44 & CP43" rear straight Axle. It hooks into your stock truss, and also bolts to the stock link location brackets for extra stability. Made from high quality Aluminum. Light weight and heavy duty. Options of Raising your rear links + 11mm and + 16mm at the rear axle. Available in Silver or Black. (Now available in Dark Grey as well) Lifetime Bombproof ...

$14.99 $15.99 (7 variants)

SuperShafty Axial Capra Axle Servo Mount

SuperShafty Axial Capra Axle Servo Mount Works with stock Axial Capra Axle and SuperShafty "CP4...

SuperShafty Axial Capra Axle Servo Mount Works with stock Axial Capra Axle and SuperShafty "CP44" Axle will NOT fit SuperShafty “CP43” Axle Made from 6061 Aluminum. Light weight and heavy duty. Eliminate the flex from the flimsy stock mount. Available in Silver or Black. Lifetime Bombproof Warranty. 

$54.99

SuperShafty Capra Universals Axle Shafts (2)

SuperShafty Universals for stock Axial Capra front axles.    Machined from high quality chromoly...

SuperShafty Universals for stock Axial Capra front axles.    Machined from high quality chromoly steel, then heat treated. Larger than stock joint and pin. Clearanced for smoother rotation at max turning angles. Come assembled for easy installation This is a replacement set of Axial Capra 1.9 F9 Universal Axle Set, intended for use with the Capra 1.9 Unlimited Trail Buggy Kit, and work in the stock plastic housings. These also fit the SuperShafty CP44 axle housings. And other Stock Replacem...

$37.99 $43.99 (2 variants)

SuperShafty CP44 & CP43 add on brass covers

SuperShafty CP44 & CP43 add on brass weight gear covers. Want to add a little weight to your ...

SuperShafty CP44 & CP43 add on brass weight gear covers. Want to add a little weight to your SS CP44 & CP43 axles? Here is your chance. These fit ONLY CP44 & CP43 Rear Axle housings, and the ALUMINUM front SuperShafty Knuckles. They will not stack on top of the brass knuckles. They do not fit stock axles or other brand axles and knuckles. Sold in Pairs.  The heavies require a small amount of modification to fit the steering knuckles. But bolt right on the rear CP43 and CP44's   NO...

$21.99

VANQUISH AXIAL CAPRA/SCX10-III PORTAL STUB SHAFTS

Chromoly Portal Axle Stub Shafts for the Axial Capra and SCX10-III Made from high quality chrom...

Chromoly Portal Axle Stub Shafts for the Axial Capra and SCX10-III Made from high quality chromoly steel for a large increase in strength Replacement for stock Axial rear axle shafts (AXI232008)  Package Includes: 2 - Portal Axle Stub Shafts

$19.99 $299.99 (4 variants)

SuperShafty "CS41" Custom Axle System

IN STOCK! SHIPPING NOW! INTRODUCING THE NEW SUPERSHAFTY CS41's   These axles were designed for t...

IN STOCK! SHIPPING NOW! INTRODUCING THE NEW SUPERSHAFTY CS41's   These axles were designed for two different markets:  SORRCA Class 1  and WRCCA 1.9 Mini or the UTB18 Mini Capra.   We designed these to fill that sweet spot in width that is perfect for a Class 1 and a Mini/UTB18. Using full-sized, 1/10th scale internals and machined out of 7075 aluminum, these are complete axle kits all with the bombproof durability and reliability you’ve come to expect from us.    Key Features: 7" wide, h...

$29.99 $32.99 (8 variants)

SuperShafty Steering Servo Guard Armor

This is SuperShafty Servo Guard Armor, and is intended for use with an Axle Mounted Servo. This p...

This is SuperShafty Servo Guard Armor, and is intended for use with an Axle Mounted Servo. This piece was developed to protect the steering servo where the servo is exposed and prone to damage during normal use.  Features:  Made of 7075 aluminum. Available in several hard anodized colors. Very Light Weight Need to run a Servo horn that has a small step-out Fits these known servos:  Hitec HS-7950TH Hitec HS-7955TG Hitec HS-7954SH Holmes HV500 & SHV500v2 3Bros G13 JR DS8711HV Savox 1230s...

$27.99 $29.99 (6 variants)

TGH Dual Servo Mount

TGH "DSM" or DUAL SERVO MOUNT - For Flat Rail Chassis Machined from 6061-T6 Aluminum 6...

TGH "DSM" or DUAL SERVO MOUNT - For Flat Rail Chassis Machined from 6061-T6 Aluminum 67mm Wide for use on Flat Rail Chassis Allows for aftermarket bumper installation on a Flat rail chassis M3 x 0.5 Threaded holes. SCX10.2 Compatible bolt pattern Weighs only 25.5 Grams  

$17.99

SuperShafty Portal Stub Axle Shafts (2)

This is a replacement set of Portal Stub Axles brought to you by SuperShafty.   They are intended...

This is a replacement set of Portal Stub Axles brought to you by SuperShafty.   They are intended for use with the CP44, CP43, Axial 1/10 Capra 1.9, and Axial 10.3 Portal axles SuperShafty Chromoly Portal Axle Stub Shafts for the Axial Capra and SCX10-III Made from high quality chromoly steel for a large increase in strength Replacement for stock Axial rear axle shafts (AXI232008)  Package Includes: 2 - Portal Axle Stub Shafts Warranty: These carry a 1 Year Bombproof guarantee against...

$49.99 $54.99 (3 variants)

DLUX UTB18 U-joint Axle-shafts w/ Knuckles

UTB18 Mini Capra U-Joint Axle Shafts: ***Heat-treated and ready for your abuse!*** Put an end to...

UTB18 Mini Capra U-Joint Axle Shafts: ***Heat-treated and ready for your abuse!*** Put an end to your broken stock CVD's These shafts will allow about 60 degrees of steering. Other modifications and parts will be required to reach this steering angle. For example: Modifying stock steering stops, new tie rod, and possibly a longer servo horn, possibly more will be required, depending on how far you want to go, and what parts you already have. Each purchase includes two u-joint axle shafts, tw...

$13.99 $14.99 (3 variants)

Vanquish Products Aluminum Axle Servo Mount for...

Vanquish Products Aluminum Axle Servo Mount for AR60 Housings Also Fits SuperShafty SS60 Axles

Vanquish Products Aluminum Axle Servo Mount for AR60 Housings Also Fits SuperShafty SS60 Axles

$14.99

Axial Capra 1.9 Portal Stub Axle (2)

This is a replacement set of Axial Capra 1.9 Portal Stub Axles, intended for use with the Capra 1...

This is a replacement set of Axial Capra 1.9 Portal Stub Axles, intended for use with the Capra 1.9 Unlimited Trail Buggy Kit.

$11.99 $149.99 (6 variants)

SuperShafty "SS60" Bombproof Axle Housings & Kn...

DISCONTINUED - THIS IS THE LAST OF STOCK. DISCONTINUED - THIS IS THE LAST OF STOCK. DISCONTINUED ...

DISCONTINUED - THIS IS THE LAST OF STOCK. DISCONTINUED - THIS IS THE LAST OF STOCK. DISCONTINUED - THIS IS THE LAST OF STOCK. SuperShafty "SS60" Bombproof Axle Housings & Knuckles & Chubs. CLAMPING CHUBS AND KNUCKLES are available on this page - click the drop down box. Features: One Piece construction Machined from 7075 Aluminum Larger than stock bearings Ring Gear able to be flipped side to side. Axial AR60 Dimensions Drop in compatibility with stock and Stock Upgrade parts. A...

$119.99

Vanquish F10 PORTAL REAR AXLE SET

F10 Portal Rear Axle Set Molded Plastic Axle housing 2 Upper link mount tuning positions Machine...

F10 Portal Rear Axle Set Molded Plastic Axle housing 2 Upper link mount tuning positions Machined Chromoly Portal Gears (VPS08353) High-Pinion Hypoid Machined Axle Gears 30/8 (VPS08330) 6-Bolt Ring Gear and Spool 1.4:1 Portal Gear Ratio (VPS08353) 6mm Output shafts with M5 wheel nut One-Piece Molded Bearing Retainers Adjustable Lower Shock Mounting Position (S8E Offset Pivot Ball IRC00509) Chromoly axle shafts Brass tube inserts Scale removable third member Machined aluminum red anodized rea...

$16.99

AXIAL UNIVERSAL AXLE SET: UTB18 (2)

AXIAL UNIVERSAL AXLE SET: UTB18 (2)

AXIAL UNIVERSAL AXLE SET: UTB18 (2)

$139.99

Vanquish F10 PORTAL FRONT AXLE SET

F10 Portal Front Axle Set Molded Plastic Axle housing Machined Chromoly Portal Gears (VPS08353) ...

F10 Portal Front Axle Set Molded Plastic Axle housing Machined Chromoly Portal Gears (VPS08353) Universal Style Axle Shafts 49 Degrees of Steering High Caster reinforced C-Hub High-Pinion Hypoid Machined Axle Gears 30/8 (VPS08330) 6-Bolt Ring Gear and Spool 1.4:1 Portal Gear Ratio (VPS08353) 6mm Output shafts with M5 wheel nut One-Piece Molded Bearing Retainers Adjustable Lower Shock Mounting Position (S8E Offset Pivot Ball IRC00509) Chromoly universal shafts Brass tube inserts Scale removab...

$29.99 $32.99 (2 variants)

Vitavon Brass Portal Box Cover - Capra & SCX10.3

Vitavon Brass Portal Box Covers 84 grams each. Sold as a pair.  Fits Stock Axial Capra & SCX1...

Vitavon Brass Portal Box Covers 84 grams each. Sold as a pair.  Fits Stock Axial Capra & SCX10.3 (SCX10iii) Axle housing Front or Rear.

$34.99

TREAL Brass Axle Diff Covers (2P) CNC Machined ...

TREAL Brass Axle Diff Covers (2P) CNC Machined Heavy Weight 15.8g/pc Upgrades for 1/18 TRX-4M Fe...

TREAL Brass Axle Diff Covers (2P) CNC Machined Heavy Weight 15.8g/pc Upgrades for 1/18 TRX-4M Features: -Compatible with: Traxxas 1/18 TRX-4M Defender, Bronco Stock Axles, and TREAL Aluinum 7075 Axles (Both Front and Rear Axles)-High quality of Brass material.-Black Coated,prevent oxidation, looks much better.- 15.8 grams/pc, add valuable weight for the mini crawler, improved anti-rollover stability.-High Precision CNC machined, perfectly fitment.  You Will Receive: -Brass Diff Cover *2pcs...

$24.99

TREAL Capra Brass Outer Portal Covers Set (2) C...

TREAL UTB18 Capra Brass Outer Portal Covers Set (2) CNC Machined Heavy Weight Upgrades Features: ...

TREAL UTB18 Capra Brass Outer Portal Covers Set (2) CNC Machined Heavy Weight Upgrades Features: - Compatible with:1/18 UTB18 Capra 4WD Unlimited Trail Buggy RTR AXI01002T1Both front and rear axles.- Heavy Weight for the mini crawler, add  60g to each wheel and help the crawling performance.- High quality brass material.- Precision CNC machining, perfect fitment.- Black coating to prevent brass oxidation, looks better.    You Will Receive: -Outer Portal Covers  2pcs-Hardware   Note: Sold as...

$4.99

Axial PORTAL STUB AXLE: UTB18 (2)

Axial PORTAL STUB AXLE: UTB18 (2)

Axial PORTAL STUB AXLE: UTB18 (2)

$32.99

Axial PORTAL BOX COVER, BRASS (30G): UTB18 (2)

Axial PORTAL BOX COVER, BRASS (30G): UTB18 (2)

Axial PORTAL BOX COVER, BRASS (30G): UTB18 (2)

$119.99 $169.99 (4 variants)

Vitavon SCX10.3 Axle AR45 Portal Housings (SCX1...

Vitavon branded Axial SCX10.3 (SCX10iii) AR45 Portal replacement housings. Made from high quality...

Vitavon branded Axial SCX10.3 (SCX10iii) AR45 Portal replacement housings. Made from high quality 7075. Lighter and stronger than 6061.  Direct replacement for a 10.3 stock housing.  Includes: Front housing: Hardware  TopHats  Or: Rear housing: Includes Alum Diff cover Hardware   *Front and rear sold separately.

$35.99

DLUX SCX24 U-Joint Axle Shafts, V2

SCX24 U-Joint Axle Shafts: ***These are the real deal! Heat-treated and ready for your abuse*** *...

SCX24 U-Joint Axle Shafts: ***These are the real deal! Heat-treated and ready for your abuse*** ***You must remove the outer bearing at the end of the axle tube. This bearing causes the shaft to be over-constrained and contributes to shaft breakage.*** These shafts will allow about 55 degrees of steering. Other modifications and parts will be required to reach this steering angle. For example: Modifying stock steering stops, new tie rod, and possibly a longer servo horn, possibly more will be...

$14.99

TREAL Capra Aluminum 7075 Front Steering Linkag...

TREAL UTB18 Capra Aluminum 7075 Front Steering Linkages Set Features: 1. Compatible with 1/18 UTB...

TREAL UTB18 Capra Aluminum 7075 Front Steering Linkages Set Features: 1. Compatible with 1/18 UTB18 Capra.2.Replacing the stock steering linkages directly.3.Pre-assembled the rod balls and O rings, easy installation4. Precision CNC maching, perfect fitment. 5. Good finish anodizing, looks better.  You will receive: Steering links 1 set

$11.99

Currie F9 Portal Axle Housing, 3rd member Front...

This is a replacement Axial Currie F9 Portal Axle Housing & Front 3rd Member, intended for us...

This is a replacement Axial Currie F9 Portal Axle Housing & Front 3rd Member, intended for use with the Capra 1.9 Unlimited Trail Buggy Kit.

$10.99 $10.99 (2 variants)

Team Garage Hack TGH-HH Panhard Mount

TGH-HH CHASSIS PANHARD MOUNT - For Flat Rail Chassis 6061-T6 ALUMINUM USED ON FLAT RAIL...

TGH-HH CHASSIS PANHARD MOUNT - For Flat Rail Chassis 6061-T6 ALUMINUM USED ON FLAT RAIL CHASSIS PERFECT FOR CUSTOM APPLICATIONS USE 107MM EYE TO EYE PANHARD AND DRAG LINK ON GSPEED TGH-V3 CHASSIS W/ AR44 AXLES USE 103MM PANHARD EYE TO EYE PANHARD AND DRAG LINK ON GSPEED TGH-V3 CHASSIS W/ CAPRA AXLE MEASUREMENTS BASED ON USING TGH DSM   

$29.99 $59.99 (4 variants)

SuperShafty CP43 Replacement Part Inventory

This is a replacement set of CP43 Axle Shafts brought to you by SuperShafty.   Warranty: These ...

This is a replacement set of CP43 Axle Shafts brought to you by SuperShafty.   Warranty: These carry a 1 Year Bombproof guarantee against Defects and Accidental breakage. We are confident in our design and product and we want you to be too. We know you guys are going to beat on them. So if something happens to them, we'll replace (does not apply to abuse).   

$29.99

Powerhobby Axial SCX24 Front Portal Axle Jeep C...

Powerhobby Axial SCX24 Front Portal Axle Jeep C10 Bronco Deadbolt Crawler

Powerhobby Axial SCX24 Front Portal Axle Jeep C10 Bronco Deadbolt Crawler

$27.99

Powerhobby Outer Brass portal Cover Front or Re...

Powerhobby Outer Brass portal Cover Front or Rear Axial Capra / SCX10 III 85Grams Features: Add ...

Powerhobby Outer Brass portal Cover Front or Rear Axial Capra / SCX10 III 85Grams Features: Add 50g weight to the wheels each, which lower the vehicle’s gravity and increase the stability. Greatly help to the wheels grabbing for the vehicle more capable crawler. Precise dimension control to make it easy to install the bearings, and run smoothly. High quality CNC machined brass material. Fit Axial Capra 1.9 UTB and SCX10 III Includes : 2 Portal Covers

$14.99

Powerhobby Axial SCX24 Front Axle CVD

Powerhobby Axial SCX24 Fron Axle CVD Note: Works only on Straight Axles

Powerhobby Axial SCX24 Fron Axle CVD Note: Works only on Straight Axles

$79.99

VITAVON SCX 6 HD 45# Steel Front Axle Shaft for...

Non-Domestic Product: New: A brand-new, unused, unopened, undamaged item (including handmad...

Non-Domestic Product: New: A brand-new, unused, unopened, undamaged item (including handmade items). See the seller’s Non-Domestic Product: No Custom Bundle: No Color:  Black MPN Does Not Apply Bundle Listing: No Modified Item: No Brand:  VITAVON Type: Front Axle Shaft Compatible Vehicle Type: Buggy, Crawler, Drift Car, Scale, Short Course Truck Compatible Fuel Type: Electric Country/Region of Manufacture: China Compatible Scale: 1:6 UPC: Does not a...

$13.99

TREAL Brass Steering Linkages Brass Links Set 1...

TREAL Brass Steering Linkages Brass Links Set 10g for SCX24 Deadbolt C10 Gladiator Bronco Featur...

TREAL Brass Steering Linkages Brass Links Set 10g for SCX24 Deadbolt C10 Gladiator Bronco Features: 1.Material: Brass2.Fits: Axial SCX24 Deadbolt Chevrolet JLU Betty C10 Gladiator Bronco3. Add weights to the front and help the crawling performance4. Weight: 10g/ setYou will Receive:-Steeing linkages 1 set

$13.99

TREAL Capra Rear Axle Upper Links Riser Bracket...

TREAL UTB18 Capra Rear Axle Upper Links Riser Bracket Relocation Adjust Mount CNC Machined Alumin...

TREAL UTB18 Capra Rear Axle Upper Links Riser Bracket Relocation Adjust Mount CNC Machined Aluminum 7075 Upgrades Features: - Compatible with:1/18 UTB18 Capra Stock Rear AxleAnd TREAL Aluminum 7075 Rear Axle.- Rise the upper links, help the crawler capability.- High quality aluminum 7075 material.- Precision CNC maching, perfect fitment.- Three location(height) options.   You Will Receive: -Rear Links Riser Mount  1pcs-Hardware

$9.99

Traxxas Metal Front & Rear Axle Gears: TRX-4M, ...

Give your TRX-4M™ the ultimate drivetrain upgrade with these front and rear metal axle gears. Me...

Give your TRX-4M™ the ultimate drivetrain upgrade with these front and rear metal axle gears. Metal axle gears are the perfect companion for the 9756 hardened-steel axle set.

$49.99

INCISION CAPRA VDI UNIVERSALS

Incision VDI Universals for stock Axial Capra front axles.    Built from high quality heat treat...

Incision VDI Universals for stock Axial Capra front axles.    Built from high quality heat treated chromoly steel Come assembled for easy installation

$90.99

Portal Axle Kit Assembled V2

The Portal Axle Kit-V2 is designed for the Everest Gen7 features the same portal axles that are i...

The Portal Axle Kit-V2 is designed for the Everest Gen7 features the same portal axles that are installed in the Redcat Gen8 Scout II-V2 scale crawler, but includes all the parts needed to easily install portal axles on your Gen7 Sport or Pro. This kit includes the front and rear portal axle, along with a molded plastic plate so you can mount your servo to your Gen7 chassis. The Redcat Portal Axle Kit also includes a slipper clutch upgrade, with gearing change, intended for the Everest Gen7. ...

$59.99

Powerhobby Axial SCX24 Front Rear Portal Axle J...

Powerhobby Axial SCX24 Front Rear Portal Axle Jeep C10 Bronco Deadbolt Crawler

Powerhobby Axial SCX24 Front Rear Portal Axle Jeep C10 Bronco Deadbolt Crawler

$11.99

AXIAL FRONT LINK SET, ALUMINUM: UTB18

This preassembled set replaces the front upper plastic links and lower steel links on the UTB18 C...

This preassembled set replaces the front upper plastic links and lower steel links on the UTB18 Capra with lightweight, durable, and good-looking anodized aluminum links. The set includes four aluminum links, eight plastic rod ends, ball joints, and hardware.

$39.99

Traxxas Axle Shafts, Front (2), Rear (2)/ Stub ...

Axle shafts, front (2), rear (2)/ stub axles, front (2) (hardened steel)/ 1.5x7.8mm pins (2)/ 1.5...

Axle shafts, front (2), rear (2)/ stub axles, front (2) (hardened steel)/ 1.5x7.8mm pins (2)/ 1.5x6mm pins (4)/ cross pins (2). Give your TRX-4M™ the ultimate drivetrain upgrade with the heavy-duty axle set. Made from high-grade hardened steel, the heavy-duty axle set is the ultimate in strength and durability. The set includes front and rear axle shafts, front stub axles, cross pins (2), 1.5x7.8 mm dowel pins (2), and 1.5x6mm dowel pins (4).

$49.99

INCISION VS4-10 VDI UNIVERSALS

Incision VDI Universals for Vanquish Products VS-410 Offset front axles.    Built from high qual...

Incision VDI Universals for Vanquish Products VS-410 Offset front axles.    Built from high quality heat treated chromoly steel Come assembled for easy installation

$45.99

Axial AR44 Universal Axle Set

Features: Smooth action for an efficient drivetrain Hardened steel construction Works with AR44 ...

Features: Smooth action for an efficient drivetrain Hardened steel construction Works with AR44 Axles Genuine Axial Part

$274.99

VANQUISH AXIAL CAPRA CURRIE F9 FRONT AXLE BLACK...

Features Offset Pumpkin Machined Aluminum Construction Increased Caster Over 50 degrees of steer...

Features Offset Pumpkin Machined Aluminum Construction Increased Caster Over 50 degrees of steering Removable upper link mount One-Piece Machined Bearing Retainers Additional mounting holes on rear of truss for custom applications Chromoly Incision VDI Universal Axle Shafts Bent Stainless Tie rod for added steering angle   Includes: Axle Housing 3rd member Chromoly Incision VDI offset universal axle shafts Removable front upper link mount Stainless Drag link and Tie-rod with rod ends Suspe...

$49.99

INCISION SCX10-III PORTAL VDI UNIVERSALS

Incision VDI Universals for stock Axial SCX10-III Portal front axles.    Built from high quality...

Incision VDI Universals for stock Axial SCX10-III Portal front axles.    Built from high quality heat treated chromoly steel Come assembled for easy installation

$79.99 $79.99 (2 variants)

VITAVON SCX6 CNC Aluminum7075 V2 Steering Links...

Non-Domestic Product: New: A brand-new, unused, unopened, undamaged item (including handmade...

Non-Domestic Product: New: A brand-new, unused, unopened, undamaged item (including handmade items). See the seller’s Non-Domestic Product: No Custom Bundle: No Color: Silver Black Titanium MPN Does Not Apply Bundle Listing: No Modified Item: No Brand:  VITAVON Type: Steering Links Set Compatible Vehicle Type: Buggy, Crawler, Drift Car, Scale, Short Course Truck Compatible Fuel Type: Electric Country/Region of Manufacture: China Compatible Scale: 1:6 ...

$29.99

SuperShafty Ryft Hardened Differential Spool CN...

SuperShafty Ryft Hardened Differential Spool CNC Machined For Axial RBX10 Features: -Lifetime B...

SuperShafty Ryft Hardened Differential Spool CNC Machined For Axial RBX10 Features: -Lifetime Bombproof warranty  Material: Hardened Steel-Precision fit -Fits Front or Rear-Gears not included  

$119.99

VANQUISH F10 STRAIGHT FRONT AXLE SET

The F10 Plastic straights axles benefit from Vanquish Product’s years of design experience in mak...

The F10 Plastic straights axles benefit from Vanquish Product’s years of design experience in making the industry’s best aluminum axles. The plastic molded F10 straight axles feature an ultra rigid design with an integrated truss that ties both ends of the axle together, reinforced panhard mount and integrated oversized axle c's for added strenght and reliability.   F10 Front Straight Axle Set: Molded Plastic Axle housing Universal Style Axle Shafts 49 Degrees of Steering High Caster reinfor...

$7.99

AXIAL PORTAL AXLE COMPONENTS, REAR: UTB18

AXIAL PORTAL AXLE COMPONENTS, REAR: UTB18

AXIAL PORTAL AXLE COMPONENTS, REAR: UTB18

$7.99

AXIAL CURRIE F9 PORTAL AXLE HOUSING: UTB18

AXIAL CURRIE F9 PORTAL AXLE HOUSING: UTB18

AXIAL CURRIE F9 PORTAL AXLE HOUSING: UTB18