Products

Team Ottsix HD Hypoid Ring & Pinion and Locker ...

Full HD Hypoid ring & pinion gear set. Comatible with all AR44 applications. Set includes dee...

Full HD Hypoid ring & pinion gear set. Comatible with all AR44 applications. Set includes deep socket full HD locker, all mounting hardware, and stainless steel shim stock.   

Team Ottsix RC Voodoo 'PLUS10' 1.9 True 3 Stage...

Product Description Fits most popular 1.9 up to 4.75".  Made with premium foam, soft outer, medi...

Product Description Fits most popular 1.9 up to 4.75".  Made with premium foam, soft outer, medium middle, firm center. Not recommended for 4.19 or smaller tires.   'PLUS10' 1.9 True 3 Stage Foams (for trucks OVER 10 lbs)(not for 4.19 tires)

TeamKNK Button Head ProPak Stainless Bulk Bag (...

700 piece stainless bulk bag , (50) each 3mm x 4,6,8,10,12,14,16,20,25,and 30mm Button Head,(10...

700 piece stainless bulk bag , (50) each 3mm x 4,6,8,10,12,14,16,20,25,and 30mm Button Head,(100) 3mm nylocks and (100) 3mm washers PCS 700

Tekin PRO4 HD 3500kV Brushless Motor

Tekin's PRO4 HD Motor raises the bar in offroad power. The PRO4 HD's longer 550 can and 4-pole de...

Tekin's PRO4 HD Motor raises the bar in offroad power. The PRO4 HD's longer 550 can and 4-pole design provide performance gains across the board and off the charts when compared to standard 1:10th scale motors. The PRO4 HD has the torque and power to level the competition. Designed with kV options for use with 2S, 3S and 4S power systems, 1:10th 4WD Short Course has never had this kind of power! Combine the Pro4 HD with an RX8 GEN2 ESC in your 4WD Short Course and hold on!  FEATURES  4 Pole 1...

Tekin RX8 Gen3 1/8 Competition ESC

Tekin's RX8 GEN3 brings bigger power handling capabilities and increased reliability to 1/8 Scale...

Tekin's RX8 GEN3 brings bigger power handling capabilities and increased reliability to 1/8 Scale Racing. The RX8 platform has proven itself to handle the rigors of racing, while providing professional features including a programmable High Voltage BEC, Data Logging Capabilities, Timing Profiles, Voltage Cutoffs for LiPos, HotWire 3.0 Bluetooth Connectivity and more. Utilizing Tekin's D2 Dual Drive Mode Technology, the RX8 runs both Sensored and Sensorless motor drives seamlessly, giving you ...

Tekno RC 50mm Turnbuckle (2)

This is a replacement set of two Tekno RC 50mm Turnbuckles, intended for use with NB48 2.0 Compet...

This is a replacement set of two Tekno RC 50mm Turnbuckles, intended for use with NB48 2.0 Competition Off-Road Nitro Buggy Kit. These are the steering link turnbuckles. They measure 50mm long and have a 4mm adjustment nut. 

Tekno RC Aluminum Single Sided Clamping Servo H...

This is the Tekno RC Aluminum Single Sided Clamping Servo Horn for 25 tooth servo splines; such a...

This is the Tekno RC Aluminum Single Sided Clamping Servo Horn for 25 tooth servo splines; such as Futaba, Savox and ProTek R/C. This Tekno RC Aluminum Servo Horn is designed to minimize forces transmitted back to the servo spline. The horn utilizes a bottom mount design that, as opposed to a top mount, lowers the leverage point. This means your servo will be protected better to keep you in the race. There are two mounting positions to fine tune your application. A hefty M3 locking screw ensu...

Tekno RC EB410.2 Rod End Set

This is a replacement Tekno RC EB410.2 Rod End Set, intended for use with the EB410.2 Electric Bu...

This is a replacement Tekno RC EB410.2 Rod End Set, intended for use with the EB410.2 Electric Buggy Kit. 

Tekno RC V2 Adjustable Hinge Pin Brace “A” bloc...

This is a replacement Tekno RC Aluminum V2 "A" Block Adjustable Hinge Pin Brace. The V2 adjustabl...

This is a replacement Tekno RC Aluminum V2 "A" Block Adjustable Hinge Pin Brace. The V2 adjustable hinge pin system brings tuning and adjustment on your Tekno RC vehicle to a whole new level. You are now able to independently adjust kickup, sweep, toe, and anti-squat as well as front and rear roll centers. The V2 system requires TKR5165 square inserts. Each block is available separately to keep replacement costs down. Each block is CNC machined from 7075 aluminum then gun metal anodized for w...

Tekno RC V2 Adjustable Hinge Pin Brace “C” bloc...

Product Description TKR5163 – V2 Adjustable Hinge Pin Brace “C” block, 7075 CNC, EB/NB/ET/NT/SCT)...

Product Description TKR5163 – V2 Adjustable Hinge Pin Brace “C” block, 7075 CNC, EB/NB/ET/NT/SCT) The V2 adjustable hinge pin system brings tuning and adjustment on your Tekno RC vehicle to a whole new level.  You are now able to independently adjust kickup, sweep, toe, and anti-squat as well as front and rear roll centers.  The V2 system requires TKR5165 square inserts.  Each block is available separately to keep replacement costs down. Each block is CNC machined from 7075 aluminum then gun ...

Tekno RC V2 Adjustable Hinge Pin Brace “D” bloc...

Product Description TKR5164 – V2 Adjustable Hinge Pin Brace “D” block, 7075 CNC, EB/NB/ET/NT/SCT)...

Product Description TKR5164 – V2 Adjustable Hinge Pin Brace “D” block, 7075 CNC, EB/NB/ET/NT/SCT) The V2 adjustable hinge pin system brings tuning and adjustment on your Tekno RC vehicle to a whole new level.  You are now able to independently adjust kickup, sweep, toe, and anti-squat as well as front and rear roll centers.  The V2 system requires TKR5165 square inserts.  Each block is available separately to keep replacement costs down. Each block is CNC machined from 7075 aluminum then gun ...

TeknoRC Pinion Gear (15t, MOD1, 5mm bore, M5 se...

The new line of Tekno RC M5 Pinion Gears stand out from the rest.  These are the ultimate pinions...

The new line of Tekno RC M5 Pinion Gears stand out from the rest.  These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application.  Sized from 11t all the way to 30t, you are sure to find the right gear ratio for racing or those insane speed runs.  The M5 set screw ensures that your gear will stay put during operation and ensure you won’t strip it out when you need to remove it.  The gears are CNC machined, lightened, then hardened for incredible durability.  A laser ...

TGH HOSSTYLE ROLL BAR

BRAZED 0.125" MILD STEEL ROD CONSTRUCTION PRE-PRIMERED MEETS SORRCA METAL ROLL BAR REQUIRMENTS D...

BRAZED 0.125" MILD STEEL ROD CONSTRUCTION PRE-PRIMERED MEETS SORRCA METAL ROLL BAR REQUIRMENTS DIMENSIONS ARE APPROXIMATE 6.25" WIDE (RECOMMENDED TO LIGHTLY SQUEEZE THE DOWN BARS OF THE ROLL BAR WHEN INSTALLING. THIS MAINTAINS A TIGHT FIT TO BED SIDES) 3.375" TALL FROM BED TO TOP OF ROLL BAR 4.75" LONG FROM FRONT OF ROLL BAR TO BACK OF DOWN BARS APPROXIMATELY 1.5oz DESIGNED FOR TOYOTA MOJAVE, MAJAVE II AND SIMILAR TRUCK BEDS INSTALL WITH YOUR CHOICE OF ADHESIVE. WE RECOMMEND SHOE GOO OR...

TGH MODULAR BUMPER 155mm Stainless

MADE IN THE USA INCLUDES (2) 4mm thin raw 6061 aluminum MOD TABS (4) M2.5 x 3mm black oxide set...

MADE IN THE USA INCLUDES (2) 4mm thin raw 6061 aluminum MOD TABS (4) M2.5 x 3mm black oxide set screws for setting bumper bar Your choice of Titanium or Stainless Steel bumper bar Adjustable MOD TABS slide on bumper bar for varying width chassis MOD TABS are slotted for fine tuning MOD TABS accept 3/16" rod stock MOD TABS 6 grams light Bumper bars available in 85mm and 155mm lengths 85mm Ti bumper bar 7 grams light 155mm Ti bumper bar 13 grams light 85mm SS bumper bar 12 grams light 155m...

TGH MODULAR BUMPER 155mm Titanium

MADE IN THE USA INCLUDES (2) 4mm thin raw 6061 aluminum MOD TABS (4) M2.5 x 3mm black oxide set...

MADE IN THE USA INCLUDES (2) 4mm thin raw 6061 aluminum MOD TABS (4) M2.5 x 3mm black oxide set screws for setting bumper bar Your choice of Titanium or Stainless Steel bumper bar Adjustable MOD TABS slide on bumper bar for varying width chassis MOD TABS are slotted for fine tuning MOD TABS accept 3/16" rod stock MOD TABS 6 grams light Bumper bars available in 85mm and 155mm lengths 85mm Ti bumper bar 7 grams light 155mm Ti bumper bar 13 grams light 85mm SS bumper bar 12 grams light 155m...

TGH MODULAR BUMPER 85mm Stainless

MADE IN THE USA INCLUDES (2) 4mm thin raw 6061 aluminum MOD TABS (4) M2.5 x 3mm black oxide set...

MADE IN THE USA INCLUDES (2) 4mm thin raw 6061 aluminum MOD TABS (4) M2.5 x 3mm black oxide set screws for setting bumper bar Your choice of Titanium or Stainless Steel bumper bar Adjustable MOD TABS slide on bumper bar for varying width chassis MOD TABS are slotted for fine tuning MOD TABS accept 3/16" rod stock MOD TABS 6 grams light Bumper bars available in 85mm and 155mm length 85mm SS bumper bar 12 grams light USE MIP 0.050 inch Hex Driver Wrench **RECOMMENDED TO REPLACE FACTORY BUMP...

TGH SPUR LOCKER

MADE in the U.S.A. RAW 2g Light Designed for Kimbrough 60T 32P Precision Spur gear #239 Lock up ...

MADE in the U.S.A. RAW 2g Light Designed for Kimbrough 60T 32P Precision Spur gear #239 Lock up option to replace TGH Slipper plates Reduces spur gear wobble Spur gear not included

Top Shaft Spacer

This part is a spacer that fits between your trans case and the pin for the spur gear. It helps t...

This part is a spacer that fits between your trans case and the pin for the spur gear. It helps to eliminate the in and out play of the top shaft.   You will receive ONE spacer.

ToyZuki 2.5 Delrin Transfer Case

ToyZuki 2.5 Delrin Transfercase This transfercase is designed to go behind any of the Toyzuki ...

ToyZuki 2.5 Delrin Transfercase This transfercase is designed to go behind any of the Toyzuki motor mounts and has 44% overdrive.  It has a 2.6:1 ratio to the rear axle and a 1.8:1 ratio to the front axle. The mounting bolt pattern is the same as the Axial transmission, so it will mount to the stock skid as well as the Toyzuki skid.  The case uses all Axial or aftermarket gears, bearings, and shafts.This is a list of what ToyZuki used in theirs:Axial Part #AX31410AX30394AX31134AX31416Robin...

Transfer Case Drive Shaft Set (1pr)

Transfer Case Drive Shaft Set (1pr)

Transfer Case Drive Shaft Set (1pr)

Traxxas "Series 1" 6-Cell 1/16 Battery w/iD Tra...

Features: High-current connector Gold-plated copper terminals High-efficiency 16-gauge silicone...

Features: High-current connector Gold-plated copper terminals High-efficiency 16-gauge silicone jacketed wire

Traxxas 1/10 Stampede Monster Truck Rtr

Traxxas 1/10 Stampede Monster Truck Rtr

Traxxas 1/10 Stampede Monster Truck Rtr

Traxxas 1/18 Chevrolet Cheyenne K10 4x4 Monster...

*Pre-Sale* Traxxas delivers solid-axle monster truck performance and durability to 1/18 scale fa...

*Pre-Sale* Traxxas delivers solid-axle monster truck performance and durability to 1/18 scale fans with the new TRX-4MT™. A factory-installed Long Arm Lift Kit with eight shocks and large Terra Groove tires give TRX-4MT unrivaled capabilities and towering ground clearance. Available with a highly detailed Chevrolet® K10 body, TRX-4MT sets the standard for authentic monster truck performance in a convenient, take-anywhere size. MODEL 98064-1: TRX-4MT™ with Chevrolet® K10 pickup body: 1/18 sc...

Traxxas 1/18 Chevrolet Cheyenne K10 4x4 Monster...

*Pre-Sale* Traxxas delivers solid-axle monster truck performance and durability to 1/18 scale fa...

*Pre-Sale* Traxxas delivers solid-axle monster truck performance and durability to 1/18 scale fans with the new TRX-4MT™. A factory-installed Long Arm Lift Kit with eight shocks and large Terra Groove tires give TRX-4MT unrivaled capabilities and towering ground clearance. Available with a highly detailed Chevrolet® K10 body, TRX-4MT sets the standard for authentic monster truck performance in a convenient, take-anywhere size. MODEL 98064-1: TRX-4MT™ with Chevrolet® K10 pickup body: 1/18 sc...

Traxxas 1/18 Ford Ranger F-150 4x4 Monster Truc...

*Pre-Sale* Traxxas delivers solid-axle monster truck performance and durability to 1/18 scale f...

*Pre-Sale* Traxxas delivers solid-axle monster truck performance and durability to 1/18 scale fans with the new TRX-4MT™. A factory-installed Long Arm Lift Kit with eight shocks and large Terra Groove tires give TRX-4MT unrivaled capabilities and towering ground clearance. Available with a highly detailed Ford® F-150® body, TRX-4MT sets the standard for authentic monster truck performance in a convenient, take-anywhere size. MODEL 98044-1: TRX-4MT™ with Ford® F-150® pickup body: 1/18 scale...

Traxxas 1/18 High Trail TRX-4M Chevrolet '79 K1...

Small-scale adventure takes a big leap in performance with the TRX-4M™ Chevrolet® K10 High Trail...

Small-scale adventure takes a big leap in performance with the TRX-4M™ Chevrolet® K10 High Trail™ Edition. The High Trail pickup comes with a preinstalled Long Arm Lift Kit for 35% more center ground clearance than a standard TRX-4M and an extended wheelbase for even more all-terrain capability. Oversize Mickey Thompson® Baja Pro™ XS tires enhance traction and give K10 a dramatic lifted truck profile. From indoor fun to outdoor adventure, TRX-4M K10 High Trail Edition delivers the quality an...

Traxxas 1/18 High Trail TRX-4M Chevrolet '79 K1...

Small-scale adventure takes a big leap in performance with the TRX-4M™ Chevrolet® K10 High Trail...

Small-scale adventure takes a big leap in performance with the TRX-4M™ Chevrolet® K10 High Trail™ Edition. The High Trail pickup comes with a preinstalled Long Arm Lift Kit for 35% more center ground clearance than a standard TRX-4M and an extended wheelbase for even more all-terrain capability. Oversize Mickey Thompson® Baja Pro™ XS tires enhance traction and give K10 a dramatic lifted truck profile. From indoor fun to outdoor adventure, TRX-4M K10 High Trail Edition delivers the quality an...

Traxxas 1/18 High Trail TRX-4M Ford '79 F150, B...

The popular TRX-4M High Trail Edition is now available as a 1979 Ford® F-150® pickup. This newest...

The popular TRX-4M High Trail Edition is now available as a 1979 Ford® F-150® pickup. This newest edition to the TRX-4M family features exacting scale detail and oil filled shocks, combined with the High Trail’s lifted, long-wheelbase, big-tire stance. Officially Licensed Ford® F-150® Clipless Body Highly-detailed ABS hard body Molded-in color won’t chip or flake Tough fender flares and rock sliders Realistic side mirrors, door handles, roll bar, & wipers LED headlights Heavy-duty ...

Traxxas 1/18 High Trail TRX-4M Ford '79 F150, B...

The popular TRX-4M High Trail Edition is now available as a 1979 Ford® F-150® pickup. This newest...

The popular TRX-4M High Trail Edition is now available as a 1979 Ford® F-150® pickup. This newest edition to the TRX-4M family features exacting scale detail and oil filled shocks, combined with the High Trail’s lifted, long-wheelbase, big-tire stance. Officially Licensed Ford® F-150® Clipless Body Highly-detailed ABS hard body Molded-in color won’t chip or flake Tough fender flares and rock sliders Realistic side mirrors, door handles, roll bar, & wipers LED headlights Heavy-duty ...

Traxxas 2.2 Canyon 1.0 Trail Tires (2): TRX-4M,...

Traxxas 2.2 Canyon 1.0 Trail Tires (2): TRX-4M, TRX4M Licensed BFGoodrich ® Mud Terrain T/A ® KM3...

Traxxas 2.2 Canyon 1.0 Trail Tires (2): TRX-4M, TRX4M Licensed BFGoodrich ® Mud Terrain T/A ® KM3 tires are accurate down to the smallest detail with an authentic lug pattern and raised sidewall lettering. The soft-compound rubber grips onto rock surfaces to carry your TRX-4M™ up and over obstacles. Mount them on your stock 1.0" TRX-4M wheels or optional 9781 beadlock wheels. Sold as a pair. Sold as a pair.

Traxxas 2.2 Canyon Trail 1.0 Tires & Assembled ...

Traxxas 2.2 Canyon Trail 1.0 Tires & Assembled Wheels, (2) Black: TRX-4M, TRX4M Sold as a pair.

Traxxas 2.2 Canyon Trail 1.0 Tires & Assembled Wheels, (2) Black: TRX-4M, TRX4M Sold as a pair.

Traxxas 2.2 Tires, 1.0 Mickey Thompson® Baja Pr...

Traxxas 2.2 Tires, 1.0 Mickey Thompson® Baja Pro X® (2): TRX-4M, TRX4M Aggressive side lugs and d...

Traxxas 2.2 Tires, 1.0 Mickey Thompson® Baja Pro X® (2): TRX-4M, TRX4M Aggressive side lugs and deep channels give these 1/18 scale 2.2" Mickey Thompson® Baja Pro X® tires nearly unstoppable traction on any surface. The soft-compound rubber grips onto rock surfaces to carry your TRX-4M™ up and over obstacles. Mount them on your stock 1.0" TRX-4M wheels or optional 9781 beadlock wheels.  Sold as a pair.

Traxxas 20 Million X-Maxx Differential Oil (20,...

This is high viscosity differential oil from Traxxas. When servicing the Torque-blasting center d...

This is high viscosity differential oil from Traxxas. When servicing the Torque-blasting center drive unit on the X-Maxx, Traxxas recommends using this 20M weight oil.   TRA5040 5040