$20 & Under

PowerHobby 25T Aluminum Clamping Servo Horn Blue

FEATURES: Hard anodized aluminum construction                      Compression mount, two screws ...

FEATURES: Hard anodized aluminum construction                      Compression mount, two screws install on either side of arm and                      tighten center hole around servo spline INCLUDES: 25T Servo horn with hardware

Traxxas Body Paint Candy Mgnta 5 ozs

Traxxas Body Paint Candy Mgnta 5 ozs

Traxxas Body Paint Candy Mgnta 5 ozs

Traxxas Body Paint Race Red 5 ozs

Traxxas Body Paint Race Red 5Oz

Traxxas Body Paint Race Red 5Oz

Traxxas Body Paint Matte Finish 5 ozs

Traxxas Body Paint Matte Finish 5oz

Traxxas Body Paint Matte Finish 5oz

Bob Smith Industries MAXI-CURE Extra Thick CA (...

This is a two ounce bottle of Bob Smith Industries MAXI-CURE™ extra thick CA glue. MAXI-CURE™ ext...

This is a two ounce bottle of Bob Smith Industries MAXI-CURE™ extra thick CA glue. MAXI-CURE™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic.MAXI-CURE™ bonds fiberglass, hardwood, metal and rubber better than...

Dirty Richard Single Stage Foam Inserts Medium ...

Features: Fits PB9011 Rock Beast XL 1.9 Tire Quality Foam Affordable Durable Fits Pit Bull RC ti...

Features: Fits PB9011 Rock Beast XL 1.9 Tire Quality Foam Affordable Durable Fits Pit Bull RC tires perfectly - so now you have replacement options directly from Pit Bull R/C Available in three densities  - Stiffy: FMF = FOAM FIRM, Leaner: FMM = FOAM MEDIUM, Limp: FMS = FOAM SOFT Fits other brands as well - insert measures 115x47.6x37.4mm

Holmes Hobbies CrawlMaster Sport 540 20t

FEATURES: 5 slot rotor for industry leading smoothness Zero timing, universal installation and r...

FEATURES: 5 slot rotor for industry leading smoothness Zero timing, universal installation and rotation direction 1/8th inch shaft diameter 36mm OD x 52mm length (not including shaft) 178g weight m3 mount holes, 25mm spacing, "540" standard ball bearing on output bronze bushing on end bell High strength magnets

Robinson Racing SCX10/SMT10 X-Hard 48P Top Shaf...

The Robinson Racing SCX10/SMT10 X-Hard 48P Top Shaft Input Gear is an optional upgrade for the st...

The Robinson Racing SCX10/SMT10 X-Hard 48P Top Shaft Input Gear is an optional upgrade for the stock AXI30394 top shaft gear that is included with the AX10, SCX10, SCX10 II RTR 3 gear transmission, Wraith and SMT10 models. This hardened steel input gear is much stronger than the stock gear and is a great option for high power applications.

Dynamite 5 Piece Metric Nut Driver Set

Features: Includes 4mm, 5mm, 5.5mm, 7mm and 8mm sizes Ergonomic rubber-coated handle Hardened ch...

Features: Includes 4mm, 5mm, 5.5mm, 7mm and 8mm sizes Ergonomic rubber-coated handle Hardened chrome vanadium shaft and socket Precision 6-point socket Long 75mm shaft Storage Pouch Rotating end cap

Holmes Hobbies 7" Servo Extension

This 7 inch servo extension wire allows you to mount a servo farther away from the ESC without ha...

This 7 inch servo extension wire allows you to mount a servo farther away from the ESC without having to cut and splice wires.

MIP Hex Driver Wrench 2.0mm

Package Includes:  1 x 2.0 mm Hand Wrench w/ label and wrap Tool Makeup: Tool hex cut with dia...

Package Includes:  1 x 2.0 mm Hand Wrench w/ label and wrap Tool Makeup: Tool hex cut with diamond wheel for ultimate precision  Tool shank CNC ground from US Grade tool steel drill blanks  Tight tolerances held within 20 Microns which is .02 mm and moreover .0008 in. ! To put that into perspective that's like taking a human hair and dividing it by 4 !  Super Comfy to the hand Polycarbonate Handles that are resilient to hot and cold weather so wont harm your hands in poor weather condition...

MIP Speed Tip Hex Driver Wrench .050"

 These wrenches have high quality precision cut steel tip for accuracy. These tools are awesome ...

 These wrenches have high quality precision cut steel tip for accuracy. These tools are awesome for wrenching on your cars with a power screwdriver or electric drill that has a 1/4" quick release mechanism, and are perfect for quick maintenance on your cars. As the exclusive manufacturer, MIP has worked very closely with John Thorp to produce the best wrenches in the hobby industry. Much longer than a typical drill bit, for the most reliable tool to tackle hex-head screws, top technicians an...

JConcepts 63mm Tusk 1.0" Tires (2)

JConcepts continues to muscle new scale off-road items into the market with the introduction of t...

JConcepts continues to muscle new scale off-road items into the market with the introduction of the Tusk 1.0” tire with 63mm outside diameter. After successful tires such as the Landmines, the team focused on a new design with information learned by driving, crawling, and important input from a heap of development time by the JConcepts team. The team used a large overall sizing making it a very high-performance and scale-based tire, but the tread layout went under the scope for changes. The T...

REVE D Drift Wheel DP5, 6mm Offset, Fluorescent...

Lightweight AND high-traction wheels are now available!By optimizing the material and design, Rev...

Lightweight AND high-traction wheels are now available!By optimizing the material and design, Reve D has achieved super light weight at around 11g per piece while ensuring the required strength! Sufficient traction is secured by paying attention to the hexagonal hub mounting points and rim dimensions!The best balanced wheel in "Lightweight And High Traction" has been completed!A Large Diameter and thin rim has been applied to the inside radius of the wheel. The large diameter rims prevent une...

NSDRC 27mm 25T 1/10 Clamping Monster Horn

27mm Monster Clamping Horn: One of the strongest servo horns on the market! Super thick, incredib...

27mm Monster Clamping Horn: One of the strongest servo horns on the market! Super thick, incredibly strong 7075 aluminum, with large M2 allen head clamping bolt. 25T Spline 5.9mm 27mm Length (Center spline to center furthest hole) M3 Threaded Holes 4mm Thick 7075 Aluminum

Redcat Shock Bodies (Aluminum)(Bronze)(4pcs): A...

Shock Bodies (Aluminum)(Bronze)(4pcs)

Shock Bodies (Aluminum)(Bronze)(4pcs)

Robinson Racing 32P Pinion Gear (9T)

Robinson Racing 32 Pitch Pinion Gears features an 1/8 inch bore. These gears are not heat treated...

Robinson Racing 32 Pitch Pinion Gears features an 1/8 inch bore. These gears are not heat treated and should only be used with plastic spur gears. If you only run plastic spur gears these pinions are the perfect choice. One 5-40 set screw included and the pinion is not marked with tooth number. Choose from multiple options to fine tune the gear ratio of your vehicle.

Darkside 3D Printing 1/10 Milk Crate Scale Acce...

Darkside 3D Printing 1/10 Milk Crate Scale Accessory

Darkside 3D Printing 1/10 Milk Crate Scale Accessory

Darkside 3D Printing 1/10 Cooler Scale Accessory

Darkside 3D Printing 1/10 Cooler Scale Accessory 3D printed replica that features an opening lid ...

Darkside 3D Printing 1/10 Cooler Scale Accessory 3D printed replica that features an opening lid that looks just like the real thing. This cooler is available in a variety of colors that will look great in the back of your truck, or inside your scale garage.

Darkside 3D Printing 1/10 Fire Extinguisher Sca...

Darkside Printing 1/10 Intercooler Scale Accessory Motor catch fire? Put it out with your new fir...

Darkside Printing 1/10 Intercooler Scale Accessory Motor catch fire? Put it out with your new fire extinguisher. 

Stainless 5mm M5 Nylock Nuts (8)

M5 - 5mm size. Used mainly on portal stub shafts like the Vanquish Phoenix and F10's

M5 - 5mm size. Used mainly on portal stub shafts like the Vanquish Phoenix and F10's

DS Racing Feathery Split Spoke Drift Rim (Gold)...

The DS Racing Feathery Split Spoke Drift Wheels are a great option to add that custom look to you...

The DS Racing Feathery Split Spoke Drift Wheels are a great option to add that custom look to your RC drift car. These wheels feature a great looking "split spoke" design and use a 12mm hex. DS Racing has made these components available in multiple color and style options allowing you to select the wheels that will best match your build. Features: Custom Split Spoke design 12mm Hex Multiple color options and styles are available to best match your build Specifications:Scale: 1/10 DriftDiam...

Redcat Servo Link (44.5mm) (1 pc)

Redcat Servo Link(44.5mm) (1 pc)

Redcat Servo Link(44.5mm) (1 pc)

TRAXXAS SILICONE O-RINGS, BLUE (12)

TRAXXAS SILICONE O-RINGS, BLUE (12) *Can be used in the Redcat Ascent to increase shock performa...

TRAXXAS SILICONE O-RINGS, BLUE (12) *Can be used in the Redcat Ascent to increase shock performance.

VANQUISH 1.5MM REPLACEMENT TOOL TIP

1.5mm Replacement Ground Steel Tool Tip Tool shaft diameter is 3.5mm

1.5mm Replacement Ground Steel Tool Tip Tool shaft diameter is 3.5mm

Sideways RC Scale Drift Custom Wing Mount (Silv...

his is a pair of Sideways RC Style 6 Custom Wing Mounts, detailed scale option parts to add real...

his is a pair of Sideways RC Style 6 Custom Wing Mounts, detailed scale option parts to add realism to any 1/10 drift kit. These parts are hand made, machined out of metal and adjustable to fit any 1/10 scale body. This pack includes two machined metal mounts and hardware for installation.  Note: Modification to your model may be required when installing these parts. Wing shown in photos is for illustrative purposes only and is not included. Features: All parts are handmade. Machined me...

Sideways RC Scale Drift Wing (Version 1)

The Sideways RC Scale Drift Wing is the ultimate accessory for your Sideways Wing Mount. This pl...

The Sideways RC Scale Drift Wing is the ultimate accessory for your Sideways Wing Mount. This plastic part has been open cast molded from polyurethane to provide an affordable and durable upgrade. Plus, you can run the wing as is, or add one of two different side plate options to change the aesthetics. Package includes one wing, as well as one set of large side plates and one set of small side plates.   Features: All parts are handmade Open cast molded out of polyurethane Infused with pig...

Sideways RC Scale Drift Extreme Turbo

This is a Sideways RC Scale Drift Extreme Turbo, a detailed scale option part to add realism to a...

This is a Sideways RC Scale Drift Extreme Turbo, a detailed scale option part to add realism to any 1/10 drift kit exhaust. This plastic part has been open cast molded out of quality polyurethane instead instead of 3D printed, keeping the cost down and quality up. The half turbo is handmade with the colors infused directly into the product in multiple pigment options and a realistic paint scheme applied. This pack includes one molded plastic Extreme Turbo, and a template decal to help with mo...

Yokomo BD9 4.8mm Ball End Cap Ball Cup (Hard)

This is a replacement Yokomo 4.8mm "Hard" Ball End Cap Ball Cup Set for the BD9 2019. These ball ...

This is a replacement Yokomo 4.8mm "Hard" Ball End Cap Ball Cup Set for the BD9 2019. These ball cups are compatible with the BD9 and BD8 4.8mm ball studs. These ball cups are made from a hard type resin to improve the response and durability of the suspension.

Connector: XT30 Female to XT60 Male

Used to convert battery with XT60 to XT30. No wire design will save more space. Use these connec...

Used to convert battery with XT60 to XT30. No wire design will save more space. Use these connectors and save time soldering. You will receive: (1) Connector.

Powerhobby 1.9" 4.75 1/10 Dual Stage Rock Crawl...

Powerhobby 1.9" 4.75 1/10 Dual Stage Rock Crawling Foam (2) Firm Features: Dual-stage for incred...

Powerhobby 1.9" 4.75 1/10 Dual Stage Rock Crawling Foam (2) Firm Features: Dual-stage for incredible grip and sidewall support Extremely Durable Closed Cell Foam Lightweight Inner Closed Cell for Unmatched Sidewall Support Soft Outer for Maximum Traction Improved Performance and Appearance Waterproof - Inner foam Includes: 2 Foam Inserts

Team KNK (2 pcs) Brass 12mm x 8mm Hex

(2) 12mm x 8mm wide Brass Hexes with hardware PCS 2 Adds 12.7 grams to your axle

(2) 12mm x 8mm wide Brass Hexes with hardware PCS 2 Adds 12.7 grams to your axle

Traxxas Ford Bronco Front Bumper w/ Winch mount...

Traxxas Ford Bronco Front Bumper w/ Winch mount, Rear Bumper, Bumper Mounts, and Center Skid Plat...

Traxxas Ford Bronco Front Bumper w/ Winch mount, Rear Bumper, Bumper Mounts, and Center Skid Plate: TRX-4M, TRX4M