SuperShafty 2.2 Brass Bearing Rotors
2.2 Brass Bearing Rotors
- 2 Brass Rotors
- 2 Aluminum SLW Style hub mounts
- 2 Bearings
42mm Bottoms Up Brass Bearing Scale Rotor - Sold in PAIRS
These are intended for 2.2 wheels.
But have been proven to fit some 1.9's without any modifications.
And other 1.9 or 2.2 wheels with slight Modifications.
PLEASE MEASURE YOUR WHEELS BEFORE ASSUMING THEY WILL FIT.
Some wheels just need a SLW spacer to help the Brass part fit behind the bolts.
42mm x 12mm
The pair weighs 134 grams (4.7oz)
SLW Hub Compatible, Center thickness 1.0mm so it wont add much width to your track width.
Pre-assembled Press Fit. (you CAN take the bearing out if you really need to, but why?)
Keep that bearing oiled with very light oil.
Want to run weighted scale rotors, but don't want all that rotational mass? ME TOO!!!!
That's why I designed these.
Stop robbing that power from your motor.
Stop breaking parts.
Stop worrying about it. The FIX is here.
Add these to your setup, to add the weight you want, down low.
Without worry about the wear and tear on your truck.
- ALL While being SORRCA LEGAL
- AND adding valuable Scale points !!!!
MAKE SURE TO WATCH THE VIDEO !!!
SOLD AS A PAIR - $49.99
FOUND NEW OLD STOCK 12/4/2020
BEARINGS HAVE NOT BEEN BROKEN IN, YOU WILL NEED TO FIND A WAY TO SPIN THEM AT A HIGH RPM TO SEAT THE BEARING SO THEY SPIN FREELY. I do not have the time required to spend breaking these in anymore, so the current offering is with them needing broken in by you.